The Official DX10 Scenery Fixer Support Forum

Hi everyone I've got quite a problem when flying AC (no matter what altitude) when overlooking water. For some reason my sim lags. Literally from having steady fps overlooking ground, I get anywhere from 2-10 (not more) when in flight overlooking water. Any suggestions. (Fixer installed, all settings applied) My water is set to 2x Medium, everything else I let me Fixer decide.

Hello All - I have strange square grass textures on L52, Oceano County Airport, Oceano, CA from the Orbx freeware airports. Is there something in the fixer I need to set or slide to correct it? Thanks, Daniel

Hello, I have been installing several games in my computer.. Yesterday, before doing it.. I was flying correctly without any problem. Now.. I entered the fixer.. and it said to me that DX was changed and needed to make changes to include new libraries.. Did the changes.. Entered FSX and suddently.. CRASH to Desktop. The reason this: C:\Windows\system32\d3d11.dll have to say that I use SweetFX with it.. but never had a problem before today. here they say to remove an update of windows7 http://forum.avsim.net/topic/419530-d3d11dll-causing-fatal-error-crash/#entry2792041 any clue how to fix it? Thanks!

Where can I purchase Steve's DX10 Scenery Fixer? The link on Steve's page goes to the FlighSim store, but the page says no product is available. Hopefully it is just unavailable while a new installer is being finalised?

Steve, I'm still having issues with the street lights going on and off. I'm not sure if it's just my setup or the area I'm flying in. I haven't noticed it in other areas. I'm using FTX Global with UTX lights ( I prefer them) and the DX10 fixer, of course. I fly from KPHL to KMDT (short flight) at about 3500 feet and the lights below cut in and out for the majority of the flight. I would appreciate it if you would check it as a possible bug or let me know if there is something I can do about it. Thank You.

Don't take this the wrong way, but it's usually a bad idea to use a "Button" to indicate "current state" of something. Radio Buttons are more common when defining exclusive "states" and buttons are used to perform "actions". Traditional usage. I think this might be leading to A LOT of confusion for folks (myself included) when working with your wonderful tool. I was reading the manual page 29 (Legacy Options - DX10 Reflections) and I thought the "Enable" on the button meant that DX10 Compatible Reflections were enabled. But in your manual it states "Note that the button will change function after the feature is enabled to be a Disable button." So if "Enabl…

First off, great work Steve! I seem to be having an issue with airport buildings at KTVL (Lake Tahoe, CA). I'm using MSE 2.0 for California but the airport is standard default FSX, on arrival I taxi to the building and when I move my view (cockpit pan left or right) the buildings disappear, if I return to center view they re-appear. If I got to external view the buildings will cycle appear/disappear/appear/disappear. This is day time. Can anyone else confirm this problem at KTVL? Thanks, Rob.

BEWARE EVERYONE Well, I installed the DX10 fixer, and like several people, did not get the water and rain shaders to work as they were greyed out ( the manual is rather poor in regards to this). Taking advise from Paul's response to Richard Sennet,(no offense Paul-really appreciate all your work), I restored the original Shaders HLSL folder, uninstalled the libraries, and uninstalled the DX10 fixer. I then rebooted the computer, reinstalled the DX10 fixer and attempted to reinstall the libraries. I got an error to the effect of " error- libraries not installed dll error - dll 32". I thought it might be because I did not reboot after re-installing, so I rebooted …

Firstly, I've been a DX9 user up until now but with Steve's great work I'm giving DX10 a try. I've just been playing around with the fixer on my clean install of FSX/Acceleration and am loving the bloom effects (albeit toned down a little through the fixer). Not sure about DX10 water yet, still playing around with it and I haven't installed REX yet. Anyway, since I'll be gradually installing addons to FSX I may be wanting to switch back and forth between DX9 and DX10 for testing. Originally I was planning to have two different FSX.cfg's, one for DX9 and one for DX10. I was planning to "switch" back to DX9 and then replace the cfg with my one for DX9. Would this be…

hey there, i want to buy the dx 10 fixer but one the http://www.flightsimstore.com/index.php?manufacturers_id=250&osCsid=5ov60631to7jstc5q7chocoa51 it says pruduct not found. is there another link for another shop maybe? thank you and greetings, Guy Vankeer

I bit the bullet yesterday and bought the fixer program. Did a 4 hour flight in the pmdg 777 from egll to cyvr. I am not a tech expert when it comes to display settings and tweaks but the fix changed the game so much that I do not think I will go back to dx9. This is just my first impression but I thought I would share. Out of curiosity I maxed every single slider in the settings and enabled bloom. I was expecting the usual CTD I would get with dx9 in the past but was delighted to find the sim remained stable for the duration of the flight. The frame rates were a bit slower I think but it did not take anything away from the increased enjoyment of the sim a…

As far as I can work it out the situation is this. The Flight Sim Store Installer/Wrapper was simply meant to ask for a directory to install DX10SceneryFixer into. The default was Program Files\DX10SceneryFixer. (which was fine) There was some text which confusingly referred to the FSX installation directory - I can only guess that this came from use with a previous product. If you left the default choice then you are fine. If you selected browse and selected the FSX Installation directory or any other location then the wrapper will have appended DX10SceneryFixer as a sub directory and you are still fine. If you typed in the path of your FSX…

hi, i have some texture white at that plane now? also if i try in dx9 now,was ok before dx10. reinstall did not help. cheers ralf

The 314.22 driver suite. I had the latest driver suite, but when going back to DX9 for a test that I wanted to do...I noticed a much crisper display of textures. Hmmmm.... So I remembered from a past post that for the GTX680, the best driver was (and apparently still is....) the above mentioned. Not only has my DX10 now equaled the output of DX9, but even my movies are much more clear, after also adjusting video back to nVidia controlled 100 % in both masks. This has nothing to do with FSX, but just wanted to note that it also betters your other visual usage. I think that I'm out of the driver update game for my GTX680. This driver does the job..and e…

Hello! Recently I purchased Steve's masterpiece. Now after extensive testing I found one problem which seems to be common for at least three airports- two of them free UHSS and UHHH and paid OMDB. Please take a look at the screenshots below. The airfield at dusk looks like being golden-plated mirror. It happens only at dusk when the sun is low above the horizon. During day and night everything's fine. Can this be resolved somehow? Otherwise I couldn't find any problems whatsoever aside of the runway lights going off at some angles, but that's not a big deal for me, as they are ok at approach. Any opinions?

Hi guys, I got the fixer today primarily for the VC shadows, but am having a few issues with them which I thought were worth posting here. Hopefully Steve can clarify why things are the way they are and whether or not any of these issues can be resolved. Here are the problems I'm facing: ISSUE 1: Resolution. Though the edges of the shadows are now softened (and much better than FSX default) they are still a bit low resolution. This not only shows the 'jaggies' but also the constant jiggling movement effect even when the a/c and eye point are stationary. (It's not that I feel they need to be sharper as such, I don't have an issue with the amount of blur, but…

If you have the following: 1.DX10 Fixer 2.Orbx's FSX Global 3.UTX 4.A system that can handle everything turned on, and at the highest setting ------------------------------------------- Then I recommend a Dusk flight, taking off from KMRB, and then just find the Potomac River, head North or South along its course. Your choice.. UTX provides a lot of eye candy in the form of bridges that span the roads and highways that interact with the river. You will be flying along and through parts of the Appalachian Mountains. The Bloom effect is stunning for this region as Dusk descends. Run in Spot View and adjust your view downward, above the plane...and enjoy t…

These black boxes appear at night time around the lights. Also, Runway lights seem to flash on an off periodically according to camera orientation in the VC or outside The scenery is Imaginesim KATL 2012. I have Steve's fixer. Moving the Legacy slider full left solved the lights, but the taxiways disappear, so is there any workaround?

For me currently fsx is running fine, but we can only improve, especially with all the positive comments about Steves dx10 fixer.. Before I pull the trigger I must know how this fixer will work with my following addons to fsx: How wikll ikt effect the following addons: FS Dreamteam airports - KLAX, CYVR, KJFKvol2, KFLL, and KFDW,also KORD FlyTampa airports - CYUL, KTPA,, KBOS, KBUF Flightbeam - KIAD Latin VFR - KMIA vol2, and KSAN REX plus essential,UTX GEX UT2 PMDF 737ngx PMDG 777 my specs are 3770k oc 4.4ghz P*Z77-V PRO 1883 - 8gigs 780 GTX Corsair h80 Windows 7 64 bit And finally I use nivida inspector, how would this fit in and …

Hi guys, It's been a few years since I've used DX10. As we all know it was unfinished and eventually the rough edges got to me. Steve's DX10 Fixer has me very interested in giving it another shot, however I have a few Qs before taking the plunge: VC Shadows: I remember really looking forward to the introduction of VC shadows only to discover upon release that they were of such low quality (low res) and seemingly very inconsistent (which elements cast/receive shadows/accuracy of shadows) that in fact the sim looked far better without them. I've not installed the freeware, but I'd really like to know how much of an improvement Steve's made with his 'F…

Because Steve's DX10 Fixer makes it so easy to switch up DX API's... and uninstall/install the libraries; ...why does anybody just deem what non-play-in-the-DX10-sandbox, is wanted to be flown to, flown out of, or aircraft sitting in...and just use the DX API that will achieve their flight parameters? He has made it so easy to switch up...no needing to 'dummy fire up' FSX to un-check, or check the Preview Mode box. ---------------------------------------- So with that thought Steve, what would be the implications of merely switching to DX 9 before a flight, but NOT bother to uninstall the libraries that your fixer addresses. Can you fly with DX9 AND your …

This is the new support forum for Dx10 scenery fixer. I don't yet have mod status, so I cannot organise anything yet

Hi guys, I bought yesterday DX10 Scenery Fixer and am completely satisfied but have serious issue with aircraft lights as you can see here: http://img109.imageshack.us/img109/1802/u1fz.jpg http://img844.imageshack.us/img844/8049/k2xb.jpg aircraft external lights are square or rhomboid as you can see in those addon aircraft: - Aerosoft Airbus X Extended (v1.10) - Ant's Airplane Sierra P2002 - Captain SIm 757 - Flight1 Citation Mustang - RealAir Turbine Duke - PMDG MD11 Instead works VERY FINE in PMDG NGX. So, is there something I have to adjust in the fixer or nVidia Inspector? I installed the fixer with default setting. Many thanks for you…

After having had played over last months with various tweaks around DX10, I now bought Steve's DX10 Fixer (not least at all to give that great promoter at least a bit of money back for his effort he spent in this respect). Great work. Thank you! However what I now fact (at FSDT's LSZH scenery) is the following ground textures at night Any proposals on how to handle this? Thank you. Andreas

HI guys I am excited about this new development but being of a cautious nature I like to research as much before buying new products. Is there any chance you could upload the manual for the product. It may help prospective buyers like me take the plunge Cheers Jay