The MILVIZ Support Forum

Greetings: Is there some special trick to registering in the Milviz forums on your website? I can't seem to find the option to register. Also, I just bought the 310 and was wondering about the props at start up. They seem to be feathered, and I can't seem to get them to unfeather (even after I startup, cycle the props, and then shut down). Is this a known issue, or is there maybe a problem with my install? Thoughts? Thanks. PS, this is my first Milviz product, and I am really happy with the GTN and Wxr integration and flight modeling.

Hi All, After countless years of waiting, I was delighted to have received notification that the beta version of the KA350i was finally available to download from Milviz. However, to my disappointment, I keep getting an error message: "the older version of King Air 350i cannot be removed...". I couldn't uninstall (via the registry) so I deleted the old version of of the alpha folder in my P4D v4.5 installation - as well as old files in Appdata/ Roaming data, and ran the installer as Admin, but it makes no difference. Any help much appreciated. Kind regards, and thanks in advance Ray

Does a paintkit exist for the CH-47 Chinook? Thanks Michael

I purchased the PC6 from Milviz yesterday and have been enjoying some flights around Tapini. Overall Milviz have done a great job with the PC6. Whilst it's not an aircraft I know much about, it's a blast to fly especially when using it's STOL capability. What I like The turbine engine start up is the best I have experienced within a flight sim (Microsoft/Lockheed). Milviz have done a great job. With the doors off, in VR, I suffered vertigo a few times, the view down is exceptional Performance is very good Sounds are great Nice to have steam driven dials rather than a glass layout What I currently have issues with The radio config t…

I have (maybe) discovered that the ADF gauge in the Milviz 530 is only cosmetic!!!! I hope I am wrong, Milviz specifies in his MD530 manual that some accessories like the FLIR camera are only cosmetic, but does not says that an important navigational aid like di ADF is not working too! Also by choosing the free radio option and adding (in a way not described in the manual) you can add the standard FSX/P3D radio stack, the ADF will not work (I did not tried it but I have read a specific post in the Milviz official support forum. May you, pilots flying the MD530, comfirm it? In the DHC3 I have chosen the (payware) NavStax radio stack analogic , that I lo…

I am new to this Heli I have two questions: 1. I have set cold and dark in the milvitz setup panel and saved. but when I load it it has the engine running. I tried many times restarting the sim, chosing the exact livery...but no way..the engine is running. 2. is there a way to have the standard analogic radio/nav or set with the analogic payware radio/nav like in my Milvitz DHC3? Thank you

Haven't flown the 530F Heli in over a year. Tried to start it a couple of days ago, following carefully all start procedures, and can't even get the starter to engage. I have the macro for the button press, set everything properly, and press starter button, and nothing no spool up sound, no indication that anything is happening. . Uninstalled and reinstalled twice. Signed up for support forum, and have heard nothing so far from them so I can't even look at the forum to see if this is an issue that has already been addressed.

I've tried for two days but I can't get the VC throttle lever to move at all. The prop and condition levers I can move by mouse only. No matter what I do I can't get the levers to move using the saitek throttle q. I've overcome an initial installation error when installing XMLTools and now the proper entry is in the DLL.xml file. I carefully edited the controllers.xml file to enable and map the throttle & prop axes. In my registered FSUIPC5 I have tried both assigning and not assigning the axes with send to FS as normal axis but no joy. I read the manual and have searched forums. If anyone can help with the controller issue, I'd appreciate it. I've posted a similar po…

Wow - completely caught by surprise....hadn't heard a peep about this. Looks V. nice. Cheers Jeff

I have done a clean install of P3D v 4.5.12.I have downloaded and installed GTN Complete v 2.1 along with the latest version of PC Trainer.When I try to load a scenario in P3D, I get an error message that I am using an unsupported version of P3D.When I run the F1 update tool, the versions of P3D have the most recent version in the list as v 3.4.9.I am therefore unable to to update GTN Complete to be compatible with P3D v 4.5.12The DHC3 will load in P3D but although the GTN 750 surround is installed in the cockpit, it does not power up but remains a blank black screen

I installed my F-86 on my new computer (got new installer and turned off my anti-virus). I followed the "quick start" steps exactly. Hear the starter start, but after step 4 (throttle grip. which does move) I get no RPM or exhaust temp increase (no start). I have already uninstalled and then re-installed. Still no engine start. I went to the P3dv4\Milzviz folder. but there is NO F-86 folder inside. Advise please. Bill

Is this project still in the works, any possibility that we will see it this year, seems that there's no C-130, An-124 or IL-76 out there that's not 10 years old.

I just purchased the C310R for xplane 11 but I don't see any rain effects. Any help would be appreciated.

Hi Folks, She's such a pretty plane - she's just begging for a REDUX - the FDE needs some tweaking (as previously discussed) and the model mapping needs to be straightened on the nose (as previously discussed) - the VC you made for this is one of my all time favorites - superb artwork - really... Anyway - just stating my support for this product of yours and my interest in seeing it brought up to your C310 REDUX standard... Hopefully sales were good on the C310... Thanks for listening... Regards, Scott

LM's 4.5 hotfix will cause CTD if you have any MV aircraft installed with the bundled WX Advantage weather radar. A patch that fixes this is now available from our support forum.

Started with Milviz 310 it was ok and I prefer the upgraded avionics. the Flight dynamics were good..possibly better than the Alabeo 310R which I transitioned to. Every time I go back to the Milviz the dash and gauges just look too cartoonish like flysimaway stuff. Recently downloaded the new improved Milviz 310 Redux. I have the Nvidia 1050TI with 19XX by 1024 display and the Alabeo cockpit looks way better. After one flight and having to go to the 2D panel to set the EGT/oil monitor 'step' and 'lean' It's back to the hangar..Alabeo has its flaws but much more immersive and I don't expect Bugs Bunny or Scooby Doo to jump out from behind the Altimer ..

Kevin has been gradually upgrading his avionics, including a installation of a pair of new Garmn G5 EFD gauges, and a new STEC 3100 autopilot. The linked video is his flight home immediately after the autopilot installation. Taking advantage of his newly reduced workload and hand holding a Go Pro, he produced a video showing and explaining every part of his panel, explains it is still a work in process, and details his plans going forward. Its a great watch... and titled as Part 1, so it appears a Part 2 will be forthcoming. https://www.youtube.com/watch?v=Nbum5S3Q3EA

"So... what will be the status of the KA 350i this year?" That was the exact title of one of my postings 2 years ago. I bought the alpha-release of this plane 4 years ago and some even earlier. Since then still no full release of the KA 350i despite all promises. I don't mind waiting a reasonable time for a release. But I do mind: In the mean time Milviz has released at least 15-20 other new aircraft. Apparently those had more priority then the customers of the KA 350i Most of us are waiting now 4 to 5 years for the final release. With due respect but I sincerely hope this tragicomedy will end soon. Egbert Drenth

Folks, I am an old time flight simmer who has just purchased the 310R Redux from Milviz. There is supposed to be a separate manual for the autopilot. Can anyone point me to it. Thanks, Ellis Media,. Pa. USA

On Youtube! https://www.youtube.com/watch?v=rjFhO9WpnKU The aircraft is not out yet, in the meantime we can see the tuto. The release should not be long now....hope.

What about the new version? This should be in the elevator (rear) section of the plane.That would be the section that moves outside the plane when you press Numlock 7 or Numlock 8. Thank you.

I cannot believe the run around I'm getting to get a refund on the 350. I prepurchased literally 2 1/2 years ago, waited patiently, decided I don't want to wait any longer and simply requested my money back. Should be no big deal, but what a run around I'm having to endure. I'm getting every stall tactic and empty argument thrown at me. I simply want my money back. The lack of service is appalling. Dave

Hi I was looking for a helicopter vor P3DV4 and got the Milviz MD530. I wanted to learn how to start the helicopter from the cold & dark and the tutorial says that you have to push the starter button on the collective for 15 sec, while monitoring the N1 and the TOT temperature. So I thought it would be good to assign a button an my Hoyas Cougar Joystick to the starter button in the helicopter at the collective. I managed to create a "macro" for the starter button with FSUIPC. But the Problem is, once the Button is pressed the Button stays "on", I can't release it after 15 sec and I was not able to create a "macro" just for rel…

So we found a 310R pilot with prolific flight videos. Here is another pilot making videos. He is really just getting started. At one video, shot at his desk, there is a CH yoke on his desk, indicating he is also of the flight simulation community. His activity is interesting as he is flying support flights for pet rescue. Believe from something I read that he may also be a commercial pilot.

Is it possible to accomplish this for the Milviz Baron via panel.cfg and path reference to the Redux KAP 140 file(s)??