The MILVIZ Support Forum

A new beta version of the 350i has been released for V4 + V5 in the Milviz support forum. Change log PL21 Changes -Added ability to select other charts by pressing and holding -Added ability to select any charts from charts page -Added functionality to ALTN charts portion FMS-3000 Changes -Fixed several "GNSS1" references in the FMS-3000 -Added missing DSPL TMP text to DEFAULTS page -Added missing COM1/COM2 CONTROL text -Added ability to enter/select airports on the FREQUENCY DATA page -Added TUNE page 2 -Added PROG page 2 Other Changes -Included new TrueGlass/RealLight (significant V5 VRAM improvements) -Included new model to fix lig…

KA350i Version 1.1.34 Beta (V4 + V5) [UPDATED 7-31-2020] "This update seeks to address a few snags we've seen recently. As was the case before, the high resolution and low resolution options are now included in the installer. You can select "Custom Install" and unselect the "High Resolution" features to install only the low resolution options."

Hi guys, downloaded the latest installer from Simmarket since I bought it yesterday and everytime I load the King Air I get mixed gauges on the flight deck. Do I need a special patch for P3Dv5? Haven't been able to fly it yet. Thanks, Teo

For such a great plane, I am surprised there are so few (relatively) repaints available, even on the MV forum. I wonder if everyone who bought into the beta build and has owned the KA for a few years made it less "new"....

P3d v4.5 i can’t get above 40 KIAS on takeoff on water. What am I doing wrong?

Hello, The TrueGlass rain effect is not working. Do I have to do special adjustments or need a special gpu? And yes, its raining outside . I have p3d 4.2 installed. Thanks, Alexander Edit: Its working! I didn´t know, that I had to run the TrueRain installation file in the Milviz folder.

Good Morning, Thought I might try on here to see if anyone has experienced this issue and a possible fix. Good Morning,I have just bought this aircraft so new with it. I'm having an issue were the plane will follow the SID of the flight plan and then early in the flight the plane will then begin to turn right and just circle without going to the next way point. As seen in the pics FMS is set and Auto sequence is on. Can anyone please assist with were I am going wrong as I have tried everything I can to fix the issue. Thank you in advance. The FD is showing it should be turning left back onto the flight path but the aircraft goes right.Have the latest update as …

As the title says... the F-15E for FSX is now free. Thanks.

I would like to fly my old fashioned airplane in old fashioned way with ADF/VOR. Is it possible to get rid of GPS and have a set of, say, default radios instead?

Hi all... wow... did that take a LONG time or what???? Yeah... but we found lots of bugs and fixed them. There's still some minor, very small, issues with the night lighting. We will look at fixing those soon. Still won't work in v5... but that's coming as soon as they're stable. Thanks for your patience and good flyin!

I am currently doing a flight in this plane, and it's a pretty enjoyable aircraft to fly, but the sun has set and I find I have no night lighting! No cabin lights, no instrument lights, nada. I cannot see my instruments, which is a rather serious problem. There's some lighting around the GPS, but that's all. I have tried adjusting the knobs on the side that appear to change the light settings, but it makes no difference. There is no dome light switch anywhere that I can see (and the manual only mentions the adjustable knobs, making no reference to any other interior light switch). I've also tried looking at the manual and searching this and other forums for a solution, bu…

May sound a nooob question, but where exactly is the A/T located? Tried to do a flight this morning, with a Combi version. For starters, my joystick that has been working perfectly on ALL aircraft, complex or plain simple one, only pushes one throttle forward at take-off, and then lo and behold nowhere to input the IAS, unless I am missing it right in front of my eyes. As for looking it up in the Milviz Forum, I will hold my say!🤣

Purchased the B737-200 from MilViz. Not sure if it was for FSX or for P3D as the installer shows me an option for P3Dv2, but cannot get it to show up in P3Dv4.5. Where am I going wrong, and down to get to my MilViz account to re-download? Thanks.

I am new to X Plane 11 and this plane Mil Viz T310R-XP. They list a Paint Kit here: https://milviz.com/flight/products/T310R-XP/ but I don't know what to do with the files. Any help available?

In case you missed it: You need to be registered on the support forums http://milviz.com/forum/viewtopic.php?f=105&t=11967 Changelog: Please FULLY uninstall the previous version of the aircraft before installing this one. This version is the final version of the update. There will be no further changes unless there are any reproducible CTDs that somehow hid from the beta and development team. We intend to release it formally to all customers in the next few days but we are giving support forum users a first look at it (this helps us ensure that no issues appear with a much wider audience and it gets you all the new version for the weekend). I h…

First, let me say this is an exceptional simulation. Even at full price I think I have gotten a real bargain. Thanks very much for your efforts. My question concerns the connection between manifold pressure and sound. I have noticed that there isn't any perceptible sound difference in flight when reducing the manifold pressure. At least not until slow and below 15" or so. I am just wondering if this is entirely correct or not. I find it a little difficult to recognize fine power adjustments during approach and landing and when in the traffic pattern. Just wanted to gain a better understanding of this behavior. Thanks for any feedback. Jesse

With so many of our simulator aircraft we find very similar autopilots. Not all the same, but the operation is usually quite straight forward, and thus fairly simple. Now comes along a new kid on the block... I'll be the first to say that about once each flight, and in cases more than once, the KAP140 implementation in this new Redux has left me scratching my head. I have found myself going off course and on occasion climbing or descending through target altitudes. After watching the linked video below, it seems this Redux KAP140 may be the best yet in terms of modeling the real thing. Not saying it is perfect yet. Somehow today I blew a RNAV approach, not on vertic…

I wonder if we'll have anytime soon the promised SP1 for the excellent rendition of the KA350i. Unfortunately the original version with HF1 still produces freezes of my sim (using P3D4.5hf2) at different times during the start-up and systems preparation process. According to information obtained from their official forums, they're still looking to add more features, which is really good, but will make it a never ending process, in my opinion. Cheers, Ed

Hello, PrD V4.5 crashed to desktop, Installed is the weather radar that came with the DHC-3. I also own the REX/Milviz radar, but I did not install it into the DHC-3. Here is the Windows 10 log entry: -------------------------------------------- Name der fehlerhaften Anwendung: Prepar3D.exe, Version: 4.5.13.32097, Zeitstempel: 0x5d8abf93 Name des fehlerhaften Moduls: MV_WX.dll, Version: 1.40.0.45, Zeitstempel: 0x5cf14381 Ausnahmecode: 0xc0000005 Fehleroffset: 0x0000000000003126 ID des fehlerhaften Prozesses: 0x2274 Startzeit der fehlerhaften Anwendung: 0x01d60b258f54d31c Pfad der fehlerhaften Anwendung: E:\Prepar3D_V4\Prepar3D.exe Pfad d…

Hello I recently installed the milviz 737-200 and after that the WX radar for FSX. Noted in the important read me it said it was a patch for users running Prepar3D V4.4. I installed it and everything works except 1 texture does not work. Can I get an older version of that WX radar or not? Regards, Louis

Can you add an FMC to 737-200 Please??

I’m not sure if I’m just being a bit dense but I cannot figure out how to set Cabin Altitude above FL150. The CABIN ALT knob stops at 15000 ft and matches the indicator on the outer ring of the pressurization controller. How do you set it higher?

Any news about that product ? Waiting for that one, so here is my curiosity :-)

Hi! I own one license for the Milviz T-38C Adv. Series. Since the latest update the acft. perform a kind of crazy dance when I gently apply THR. T-38C swings to the right at a fast rate. After the first THR input everything works just fine during taxi; until I stop and start taxi again. I apply THR and the acft perform the same dance again and the whole Earth/environment shakes violently. It only occurs in my T-38C license. Some idea? I have disable ChasePlane, Active Sky, SF, EF, and FSUIPC. The P3D client and P3D cfg is also reinstalled. No weird P3D axis/buttons interfere. Shader deleted. System up to date but the issue remains. I Using all ORBX and Pilots FS Global Ul…

Hi Folks, I'm sure it's me and I'm probably missing something obvious - my Beaver continually backfires - complete with smoke and flame out the exhaust - anyone know how to stop it ??? Thanks... Regards, Scott