The MILVIZ Support Forum

Hi all On the off chance someone comes across this post. I am looking for a link to re download the freeware UH1 huey redux. The copy over at Blackbird freebies which states p3d and FSX does not include the FSX version. if anyone can help I would be much appreciated Regards Rhys

Hello! I have just installed Milviz AH-1 SKYRIDER in P3D v4.5 to use it with TacPack. I have no problem firing guns, but no way to fire rockets and bombs. Any hint will be very appreciated. Thanks.

Hi Just wondering about the gauges on the MD530F. Are they built into the 3d cockpit or is there a cabinet file. Cheers Rhys

Hi I have figured out how to add a sling line to the underneath of the aircraft which is done by saving the flight and editing the saved flight file and adding sling loads so I can do some slingloads. In the mams when I select engines running my sling line appears and works But when change to cold and dark the sling line is gone. Is there a way to change how saved flights behave. I would like to start my slingload flight cold and dark Cheers Rhys

Hi all. Just purchased the Porter in the store. After starting engine, controls gets locked! Working just fine before starting. I know about the lock function in cockpit, it does nothing!

Hi I would like to map the start pump in the cockpit to my switch in my homebuild cockpit. The log window in fsuipc shows it as "elect fuel pump 1" But when I assign my switch to that the md530f cockpit switch doesn't move. I have the macro for the start botton and other functions. I would also like to assign a button press for the annunciator panel if possible Anyone able to help and point me in the right direction on what to do Cheers Rhys

Hello all, DHC3 Milviz No problem to hide the yoke, but no possible to show the yoke again. No location to click to show the yoke again. OK for DHC3 Turbine. DHC3 Milviz No location to click to show the yoke again ??? Have good time Dominique

Hello all, I just tried to select the Milviz Beech 350i, but it didn't work. Here's the message. P3Dv5.1 "The product is either not activated or the activation is invalid. Please contact support" My License Key is:: OK Dominique

Hi all Just moved my fsx se to a new windows 11 PC and want to fly the UH1 redux. I have version Milviz UH1 C H v1.190723 but the cyclic controls are not moving in the full forward, back, left, right position the cyclic just seem to shudder when I move my joystick The collective and pedals work just fine. I downloaded version Milviz UH1H v2.210719 but there is no install for FSX only P3d but the download says P3D V3 V4 V5 | FSX | TACPACK any ideas on how to fix would be much appreciated Cheers Rhys

Hi, I purchased the T-38C for P3Dv4, but now it seems my original serial is invalid. Anyone had this issue or know how to workaround. Kind of annoying to lose use of a jet I paid for. Thanks

The installer for B737 goes up to P3D V4 - How can it be installed to P3D V5.4? I also have V4 and tried to install it and the true glass and real lights cause my rig to crash. Maybe a Vram issue. I can install it to a dummy folder and then plunk it in my V5 addon folder but then it isn't added to the MVAM manager.

Oh where, oh where is the elevator trim wheel? When I take off, the plane shoots up and is very hard to control. Perhaps it's because I am not using any trim. But I can't find the trim wheel. It does not appear to be in the manual. There don't appear to be any turorial videos. Maybe if I trim it, it might work? Does it even have a trim wheel?

Do you have a list of the LVAR's for the Chinook please? Some I'm having trouble finding... Want go get items bound to buttons on my HOTAS. If I have the list it makes trying to setup much more easier... Regards,

Hi all Hi have the MD530F and using it in FSX se. I have built a MD500 full scale sim from a Hughes 300 cockpit and I am using a real MD500 collective cyclic and pedals. I have the macro file for fsuipc and have a assigned my twist grip on the collective to pitch 1 and assigned the collective starter button to the macro command in fsuipc. I have followed the YouTube clip. on how to start the engine. I can get the engine to start but when I go through the start up the larger N2 needle moves quick and the smaller needle stays where it is, then the lager needle drops back and eventually after a little time the smaller needle and the larger move together t…

Hi all I know it's an old aircraft and no support available, but I was wondering if any has the update Milviz MD530F V2.141208. I have version 1 and I understand that there were some tweaks in the second version If anyone can help It would be much appreciated Regards Rhys

Installed the now-free Porter about a month ago in v5.3. Installed using the license key number posted on the Milviz download page. All was well. Today, when selecting the AC I get a pop-up basically saying the license key is invalid (and P3D hangs). Tried a reinstall witch both the posted key and no key at all, both times the installer said the key was invalid. Anyone else seeing this?

https://flightsim.to/file/72490/milviz-shrike-f-86-payware-radio-mod I found this on Flightsim.to.

https://flightsim.to/file/72193/milviz-freeware-f-86-rearview-mirror-mod Here's a mod I did to remove the rearview mirror color. At night it would be like a spotlight in your face. It was useless anyway. I believe the mirror is build into the model, so it can't be removed completely is my guess. But this makes night flying much better.

If you are looking for a great autopilot app check out FSRadiopanel. I've been using it on this freeware F-86 for several weeks and wouldn't want to fly without it. It's on the Google paly store. I bought the Pro version. You run it on a tablet and it connects via Simconnect. http://www.tambucho.es/android/fsradiopanel/ Link to the freeware MSFS F-86 https://flightsim.to/file/64410/milviz-f-86-sabre-full-aircraft-partial-native-conversion

Recently downloaded and installed the free FSX MilViz 310 and DHC-2. However, time constraints prevent usage. Searched for uninstall routines but could find no way to uninstall these planes from FSX. Help appreciated.

On P3D v4.5, the aircraft feel like it's running on very slippery oil'ed runway and taxiway. Every little move with the rudder and the plane reacts excessively. It's like there is no friction between the tires and the ground. It slides very easily. I've played around with the calibration from 0 to 100% sensitivity in combination with 0 to 100% null settings but nothing seems to help. Does anyone have suggestions?

I have a dead instrument panel and interior lighting on the KA350i, and interior lighting problems with the 310R, PC-6 and Piper Twin Comanche as well. (B55 and DHC-2 are ok.) PFDs and MFD don’t work, weirdly show magnified portions of the instrument panel. RTU, ESIS and FMS are also inop. Switches on the instrument panel work, (I can start the engines blind) but no lights on the panel, not even press-to-test. No cabin or cockpit lights work either (exterior lights do work). With Avionics Master Power on I can hear fans/gyros but nothing visual. I’ve been flying the excellent King Air (and other MilViz GA aircraft) for months. After cloning my 1TB HDD to a 1TB SSD abo…

After some time off, and deciding to fly the plane again, I find that I'm unable to launch the aircraft and can't use it. Some kind of licensing issue. Since paid support is no longer available, I'm hoping someone can help me here. I'm using P3D v4.5.

Hello, I've looked in their official support forum, but couldn't find a match, so I'm asking here: I installed Blackbird Sim's P180. I can power it up, start the engines and take off, but then the sim quickly CTDs because it runs out of VRAM - somehow the P180 manages to use 16 Gigs of it. It starts off with 6 - 7 on the ground, and climbs quickly to 16. Before the sim shows the appropriate error message, the plane's displays start malfunctioning, showing flickering textures. Has anyone seen or heard of this?

I cant seem to get it to work , when i hit SHIFT 1 for the ACM its grayed out , i tried it on my other computer with FSX installed and the same thing , the cockpit gauges dont work either , the aircraft are the F4 and the Corsair, i have pictures but i dont see any attach image here option