The MILVIZ Support Forum

I have a lot of planes installed, also the Milviz C310 but only the Milviz PC6 has this problem: the rudder pedals and the elevator part of the yoke only move when the plane engine is off. Lever setting stearable or lock doesnt make a difference (should not do anything for the yoke anyway). I know of at least 1 other person who has the same problem. Any solutions? I dont have double bindings for the axis. I am on SU11 beta. TPR Rudder pedals, Virpil Stick.

Hi Looking to use the KA350i sounds in my Carenado King Air. When moving the sound folder to the new aircraft folder they all appear to work apart from the initial starter and final shutdown sounds. In the sound.cfg file for the Milviz KA350i these sounds are listed as below: [FLTSIM] product_code=FSIM [SOUND_ENGINE] number_of_engines=2 ENG1_STARTER=STARTER_INT.1 ENG2_STARTER=STARTER_INT.2 ENG1_COMBUSTION_START=STARTUP_INT.1 ENG2_COMBUSTION_START=STARTUP_INT.2 ENG1_JET_WHINE=N2_INT.1.00 ENG2_JET_WHINE=N2_INT.2.00 ENG1_PROP=N1_INT.1.00 ENG2_PROP=N1_INT.2.00 ENG1_SHUTDOWN=SHUTDOWN_INT.1 ENG2_SHUTDOWN=SHUTDOWN_INT.2 //*-…

A Bendix King KR82750 avionics device is installed in the P3D version of the C310R. But there's nothing about it in the manual. Does anyone have any info about it? Thanks.

I don't spend a lot of time in MSFS so forgive me if this is a stupid question. I cannot seem to get my camera positioned to see the tank selectors on the cockpit floor. I get to a point where I can see the AUX position, but the wing crossbar is in the way. I mean this should not be something difficult to do since you want to do it during flight, right? Why is there no preset camera position for this, or is there and I'm not seeing it? Thanks, Jack

Hello, is there a Milviz UH-1C Paint kit floating around? I have the H version, but obviously that doesn't work on the C model.

Hi there,I am having a problem with the 310 and the people from discord couldn’t help me either. For some reason there is something wrong with my battery and it runs out mid flight. I have failures both from the tablet and the in game menu off and it keeps on happening. My battery runs out, but still keeps some instruments working. For example if I turn off my battery, the airspeed gauge stops working. but after pull back the engine throttle enough so that the alternators don’t produce as much electricity and the battery has to kick in, all of my avionics turn off, but my speed gauge and other analog instruments still work and it only happens after about 20 mins of usage …

I purchased the MILVIZ C310R from the MSFS2020 MARKETPLACE! i just want to know how to get this product working as advertised. I mean it's not exactly cheap. I have uninstalled and re-installed several times, but it's still the same. NO RADIOS! EFB DOESN'T WORK! PROP FEATHERING DOESN'T WORK! Other than that, the plane flies beautifully! Any constructive advice would be gratefully appreciated.

Hello everyone. After my purchase of MIlviz 737-200, everything looked awesome and I was very happy about it. I planned my route and started my engines for the first time, listening to that beautiful sound of the engines and APU shutting down. Because the route was long, about 1.6 Hours, I planned to use LNAV all the way. OK VRef speeds are programmed to MCP by CDU and everything looks perfect. Just to make things clear I used FirstAir version of the aircraft with FMS/Sperry 177 option - which comes with fully functional VNAV, LNAV and Autothrottle. 50% N1 and A/T engage - V1, rotate, V2... Climbing through 3000, I engage A/P and put aircraft in LNAV…

Is there a way to change altimeter settings from inHg to hpa?

I have just been doing a study in the cockpit after purchasing and installing this Milviz C310 for MSFS. For several minutes after loading the 310 in MSFS I was getting a sound effect every few seconds somewhat reminiscent of the door seal effect in the 310 Redux for FSX/SE. I cannot find any control in this new 310 to match the button on the right side of the panel in the Redux. After looking around and trying this and that the sound effect seemed to cease. Have no idea if something I did started, or later stopped the effect. Are you able to enlighten me? I also found nothing about door seals or other functions in the manual or checklists.

I am aware that many Milviz planes come with REX WX Advantage Radar. I am wondering, since the radar gauge is no longer sold if it would be possible to use one included in a Milviz plane on the FSW Lear 35 which I just bought. I use p3d v4.5. Thanks

Hey. Been loving the Corsair since day one really and been flying it a ton. Recently i got some extra hardware that has a flaps lever controller which in the sim is bound as Flaps Axis and for every other plane ive tested (including the PC-6 from you guys) the flaps works correctly as expected, however on the Corsair this keybind doesnt seem to move the flaps and only the binds ''increase/decrease flaps incrementally' works. This is a minor quality of life issue but would it be possible to make it react to a controller being bound to Flap Axis aswell? Or would this cause issues seeing as the bird has alot of flaps detents already.

Dears, i need a binding for the reversers on my Honeycomb Throttle for the Milviz Kingair. have tried all combinations in the Honeycomb config program for P3d. it is loading the VARs, i see them in the SIM. But the aircraft is not reacting ! eg Throttle1_DECR but all others have also tried. Throttle Set, all with Reverse. no joy the milviz kingair is a high sophiisticated aircraft. cannot belive they have no VARs for the reverse. its an essential function. And so good manuals included, eg the PL21 FMS is very good documented. but the essential hardware binding for thrust reverse not documented. how am i supposed to land the aircrafft with no r…

Hi Guys, I have my eye on the Twin Commanche... Anybody flying it in the latest version of Prepar3d v5.3 +HF2 ? Also...what is the current version of the Baron 55 ?

Hi all! I have obv. some BUGS with the Corasair FG-1D from the MS MARKTEPLACE (Steam-Version). I would be happy for suggestions. I do like this bird, it is no cheap addon - therefore I am rather not willing to accept obvious flaws. So - whats the case: - bought it over the marketplace an therefore there is no quick way to give feedback to Milviz there (unclear how to get quick access to the Corsair forum) - everything is up to date (today 10 jan 2022) with my system and FS2020 and the Corsair Problems: In my opinion there is a bug with the aileron trim system. Per default, +6° right wing down is settled when you start the plane. +6…

I just bought the FSW Lear 35. I want to operate it with the new FMS FSW has made for it but I don't want a non-functional weather radar in the panel. I would purchase the Milviz/REX WX Advantage solution IF IT WERE STILL FOR SALE. But alas, it is not. So, I considered buy a Milviz aircraft that is packaged with WX Advantage. Now, my question is this. Would I be able to edit the Lear 35 panel to use the WX Advantage gauge that will of course be in my sim from installing the Milviz aircraft? I use P3D v4.5 Thanks in advance

I have tried everything and I'm unable to achieve a descent cruise trim at any speed. I can set the trim to climb at 2000fpm and even 3000 fpm. But once I try to level off the oscillation is horrible. The slight touch to the yoke or trim and it skyrockets. My controls are calibrated and can I can trim every other aircraft I have. Can anyone please help? Thanks

I have just created a modified texture folder for Milviz King Air 350i for use in FSX. It is only a registration change, but I cannot change the "Radio Call" number on the VC. The new registration number shows fine on the aircraft (external), when loaded. I have changed the atc_id in the aircraft.cfg file and in the "Select Aircraft" details screen. I was assuming that there would be a process in the model file or a gauge to show the various atc_id's, but that does not seem to be the case. The VC stays the same with some sort of default ATC callsign that looks like it has no connection to any of the standard textures, it just keeps showing N350K for all air…

Bought this product a few months ago. Nothing works. Dark panel, no power, ALpha and Bravo controllers won't bind. I have tried all suggested remedies on the forums. Totally over it. Every time I try to login to Milviz forum I get "Wrong username or password" despite resetting several times. This software is top end of the price range, but to me it is totally unusable. At these prices I consider it reasonable to expect the installer to work without having to "Try this, try that BS." Can't even find where to go to get a refund. NOT HAPPY

I have just change email provider and can't find a way on the MILVIZ page to update my contact email. Totally lost here.

Kind of thinking of getting this bird for P3D 4.5 but want to ask a few questions first . What's the typical height and speed people fly this thing on a normal basis? I love the Piper from A2A as i have about 150 hours in them real world but in the sim i don't fly it cause flying at 110 -120 knots and having to bring a lunch every where you go somewhere, it's just to slow for me in the sim and like to go about 200 knots like the Duke B60 turbine I'm ok with. About cold weather starting , what's the deal; with this thing? ,In Alberta here it get 20 to 40 below and i use Active Sky and always real weather . I understand that this thing won't start that cold ,so do you …

WX Advantage Radar Control Bezel Removed. Are you building a mouse free flying environment or home cockpit for FSX or P3D and want to add a weather radar and GPS on to separate display’s such as the default GPS or Milviz / REX WX Advantage Radar; and then be able to control it with hardware as in real world, using digital encoders, buttons and switches? I guess like me then, you want to be able to strip away and remove the control bezel surround image, because it would not serve any useful purpose in a mouse free environment and take up valuable room on a small 7 inch display screen! There may not be many of us who have the need to achieve the above requ…

Hi, after yesterday update now the plane has no power. It remains off no matter what I do. Switch is on as well as the generator, avionics etc... displays are dark. Anybody with this problem? chemanuel

Anyone know of this has been updated to V5 or will it work in V5? I'd love to buy it but I am running V5 now.

I've been using the MILVIZ C310R aircraft to practice IFR procedures and approaches. I put the sound through my headphones via a USB adapter, and adjust the volume to match what I normally hear when wearing headphones in the cockpit. In X-Plane this means setting the interior volume to about 20% with the master volume set at 100%. The interior sound bus is where MilViz puts most of the engine and prop noises, as well as the gear down airflow noises. Unfortunately, the interior sound bus is also where X-plane puts the nav ident. The result is that the nav ident is only audible at idle power. At cruise and climb power you can't hear the nav ident at all. You …