The Multi-Crew Experience (MCE) Support Forum

Thanks again for the continue updates and support for this amazing addon. - To get the auto brake to function it need to be changed to "auto-brake rto" (hyphen) - Sound function now add loop as default like this : [SCRIPT] left pack off right pack off SoundLoop=naxsafety.wav This make all added sound files to go in loop, change it to Sound=naxsafety.wav to make it stop at the end of each sound files. Also the sounds files play very low compare to previous version, is there a way to control the volume? Not a big issue, but I have a couple of thousand downloads for my script and its a bit confusing when script lines change and make them not to work …

I am using Open Cockpit radios in a full sized A320 simulator. Is there any way that I can get the co-pilot to change frequencies, because at this stage I have to do all the work of changing freqs ! I am using JHell software for the aircraft and using SIOC for the radios, as well as MCE of course. Regards..............Brian W.

Hello, Has anyone here used MCE on the PilotEdge network? I believe they use a squakbox client but I cant be heard on the com with when MCE is active. I'm sure its a configuration issue. I'd appreciate any help.

Been awhile and I forgot how to update this for P3D to the latest version. I am now at version 2.7.29.

I thought, since many people seem to enjoy using the scripts, we could have a thread for them... Clive had a very good idea, so I have uploaded the latest scripts and flows for the NGX and MD-11 to Avsim.... http://library.avsim.net/download.php?DLID=168983 if the link doesnt work, simply do a search for "MCE"

Hello, I got MCE a few months ago and it has really transformed flight sim, adding a whole new level of immersion. Interacting with this programme is alot of fun, although I've never really - or at least not consitently - got ATC to reply. Not that that has mattered much as I just ask CP to communicate with them instead. Just this week however, the CP has lost her hearing. So have the ground engineer and the flight crew. I can hear them (co pilot still on sarcastic form) but nothing I say gets through. I've recalibrated my microphone and checked all sound systems (esp speech recognition) are working. When I start MCE I get a small window saying the "wizard could not…

Hello, I wish to call/activate a script from within another script. Is it possible? I tried a test without success. Nor I could find relevant information. This would add a lot of further flexibility and convenience! Thankks for the help, Giorgio Goggi

When the FO enters the fuel quantity, is it possible to get him to use the CDU on the right instead of the left. I use the CDU left to setup my flight, when thefuel truck turns up and fuel qty is requested, the FO uses the left CDU instead of the Right CDU and interrupts my input. Minor inconvenience, but can it be fixed ?. Also from a realism point it will be good. This works for ground connection where the FO uses the CDU on the right.

Updated to the newest version Every time I try and load MCE it gets as far as waiting for co-pilot to board and goes no further. I have tried at least 12 times. Twice it loaded and I had to select PF3 as ATC and when i tried to restart it no co-pilot would board. MCE is installed where it always has been on my D drive under program files (x86) I turned UAC off I have reset the config file several times. I have made FsInsider.dll a manual start to ensure it is loading. Still won't start. Help Doug

Hello MCE-Team, I'm new to MCE and like the tool very much. I'm running MCE in FSX:SE and it works like charm. But I have one question regarding the ATC window: In the default FSX ATC window the previous ATC messages (and the ATC messages of other AI aircrafts) are shown. MCE seems to modify the ATC window as I can't see this messages anymore. Is there an option to switch on the message history again? Thanks for your help, Michael

Having problems with Mce interacting with Gsx. Sitting at Fly Tampa's EHAM in the PMDG 747 v3 I ask Dieter to request catering services. Dieter contacts the ramp agent, the ramp agent acknowledges the request but the catering vehicles never arrive. I read somewhere that the Gsx window is supposed to open when Mce is interacting with it?....but that is not happening. Would appreciate any help with this problem. Bryan.

I'm using Zibo 737 in XP11, when I try to contact the ground, the aircraft just jumps to a other location !!! Is there a help? Can I use the default XP11 ground services and "better pushback" plugin for the pushback?

Today I was trying to start MCE after PF3 was up and running. I tried three times and got a Application Integrity Violation contact the developer error message. Last time I used it the program ran fine. Any help would be appreciated. Doug

1) In MCE.ini under [ATC] section: IgnorePFERegistry=1 PFEpath=indicate_yours Why in RC4 case it has one additional line above PF3 ? UseRadarContact= Any other settings that I should add in MCE? 2) What are the necessary settings in PF3 (on a network PC) to work with MCE? Thanks,

Is it possible to add a line in MCE.ini which would stop MCE touching MCDUs on startup in FSL A320X? You see, I like to use MCE for the reasons it can execute my own voice commands in the first place and sometimes I use its Checklist feature (without item status check. Perhaps I will need to remove some dll from MCE folder? Please advise. Thanks!

Here is the download link for latest dll to replace file in \Prepar3D v4\MCE dlls\ folder. You MUST have V2.7.5.5 installed. http://www.multicrewxp.com/mcmaddogV2.zip This updates the functionality for the MadDogX: The dll now fetches the V1, VR, V2, transition alt and cruise alt from FMC so that the FO can make accurate call-outs.. Nav freq dialling and a few other bits not functional yet

Hello, I haven't used MCE in quite some time but decided to load it up today. I ran into a few issues: - I get the message about the demo being over. I have put my license key in the MCE folder as instructed. This license key would hev been generated using a different computer (I did a rebuild a year ago), do I need a new key? - When at the MCE menu, I cannot change any check boxes by clicking on them. - After changing tabs in the menu a few times MCE crashes. This is in P3Dv4, windows 10. UAC is turned off. Thanks, Dave

Hello Running the latest update, it looks like the FO is touching something on the FCU while on the ground. After completing the set up (Route, Perf, Speeds) etc. and having engaged the FD ON (both sides) ...it appears the FO is changing something on the FCU and I keep having to reset the FD to keep them set up properly (i.e after the FO touches the FCU, speed, vs, etc. gets all reset) Anything I can do to stop the FO doing this? thx!

Using Prepar3DDv4.2 from now on. I am trying to get MCE working with v4.2 but when I go so start MCE I am getting the error "Failed to initialize TTS" them MCE stops working. Any Ideas of what I need to do? Thanks Walt

Hi - I have created custom flows etc. I want to update MCE to the latest version. I will go into control panel and uninstall MCE. Should I backup my custom flows before executing the new downloaded install file ?.

Hi, I tried several commands for tuning the radio freq with a voxscript without success. The command tried always work without problem without voxscript. Isn't it possible? Best regards Raffaele

I may have raised this before, but I have tried to use MCE with XP11 running in multi-screen mode. In this mode XP11 puts itself in full screen mode and it's not possible to switch back to Windows using Alt-Enter as one used to with FSX. One can press the Windows key to access the toolbar or start menu items, and start windows programs, like MCE or RC4. However when the MCE dialogue appears it never gets past "Trying to connect to simulator". Is there anyway that MCE can operate and detect XP11 in this full screen multi-screen mode? Thanks, Stuart

Hi, It would be really useful in my opinio to have a small change log to be aware if it's worth to reinstall a new version or not... What do you think about? Raffaele

Hi, I'm using MCE with FSL a320 and I got this annoying behaviour. After take off during climb phase in any plight I did it, the copilot automatically switch on the AP at certain time, let's say 30 second. I have no run any flow or asked for AP. Is there a way to disable this behaviour?

When I used MCE in FSX, the folder name that was used for aircraft voice scripts was the Aircraft's Folder name in FSX. However I don't believe this is the same when using X-Plane 11. I have been trying to get scripts to work for the Carenado 1900D in XP11, but the FO never seems to identify my requests per my scripts for example "Before Start Flow" only identifying it as in this case "Before Start Checklist". I'm wondering if this is down to the naming of the folder that contains the scripts? Whilst I appreciate the Carenado 1900D is not a supported aircraft, from looking at other XP11 supported aircraft, I have currently named my script folder the same as …