The Multi-Crew Experience (MCE) Support Forum

OK guys. It's now done! A fully qualified virtual crew to assist you with flying TFDi 717 in Prepar3D and FSX Grab latest version here

Dear Gerald and FS++ Team, 2.7.75 is another remarkable improvement. It is getting very close to a really complete command complement for the PMDG 737 NGX. Testing this new update I ran into: - a few items forgotten/overlooked from the previous list of suggestions (“Missing or ineffective commands”, with your replies), and - a few remaining issues which could be improved or fixed. Overlooked: 1- “Test Flight Data Recorder”: the reply is still “Performing VOICE Recorder test” (for those enjoying the “Verbose” mode). 2- EFIS CTR button: No reply/No action. I deem it necessary, if possible (e.g. "EFIS display center" "EFIS center button select" ...). …

Hi all, I just downloaded the X-Plane demo last night, and the interface is... less than stellar with a screen reader. I have to use OCR for the whole thing. Not very helpful. However, I thought of MCE's dialogue mode for voice control. I have serious issues when clicking in the X-Plane interface E.G. New Flight. When I was able to click into it, I was able to select a Boeing 737 using OCR, but really didn't know how to select the various filters when searching for an aircraft. I had issues figuring out where to type the Icao code though. I thought that "airport name" was a good a field as any to either type the name or type the code. …

Hello all, I have been able to get MCE FO to interact with RC4 using the modified rc4 winwood 50,51 and 52 folders and files provided in the package. However, I can't figure out how to change the voice to match the FO I'm using in MCE (unless its William or Lorna). Let say I'm using Trav as my FO voice in MCE, and I want hear Trav's voice interacting RC4 as well, can you explain how I would make that change. Thanks again.

Hello, I cannot get MCE to connect to X-Plane 11.30 (beta 1 or 2) either starting it first or via the plugin menu. I have uninstalled an reinstalled a couple of times using Control Panel to remove MCE first. I have tried 1.3.7.4. and 1.3.7.5. I have recently install some Microsoft C++ redistributables and I'm wondering if they are a conflicting version to those MCE requires? However, I can't find any references online or in the documentation and there is no reference to required software when I re-install. Any suggestions would be welcome. Is anybody else having this problem? Regards, Craig

Good afternoon all. Can't remember if MCE menu bar should be visible in full screen....i keep losing it when going full screen. Searched the forum, and looked through the ini file with no luck. Thank you.

Hi Guys, Just a quick one - when calling for catering with GSX using the FSlabs A320, when the vehicles are in place and asks to open the Right side, MCE opens all of the doors and then when finished, closes all doors. Is it possible to look at and find a way to only open the Right side? Thanks

A user has put out a few videos on youtube related to the operation of the Maddog Professional 2010 Intro video outlines what to expect from the tutorial https://www.youtube.com/watch?v=0vIl0dItUIc this is PART 1 of the tutorial A couple more can be found here https://www.youtube.com/watch?v=HdhMlUqbv2M https://www.youtube.com/watch?v=ScgUtiLFkms Enjoy!

Hello I am a new User Markus. Sorry for my English... Hello, how can I test the Installation? I became no Answer from CoPilot. Can I test my Micro? I´m installed the Version2.7.75 licensed My System: Win10pro (German) P3D 4.3 (64-bit)

Hi, after installing a new voicepack for GSX 2 I am no longer able to contact ground (e.g. connect groundpower or open cargo doors). Even after reverting back to the original sounds no success. Thanks for the help Peter It works again after restarting the PC.

I just upgraded (to the latest version) 2.7.75 Is there a "Readme" or "Changelog" somewhere so we can see whats been changed / improved / fixed etc ? thanks - Julian

Team, Anyway to completely decouple GSX from MCE? I'd like to prevent MCE from activating GSX menu when I load it. If not, would you consider adding an option to the .cfg?

Hi, Having some trouble with running some of the checklists with MCE. Using the FSlabs A320, I can see the checklists in the UI of MCE and when I ask for certain checklists e.g. before take off to the line and before take off below the line checklists, the FO performs the before takeoff flow or ignores me, no matter of my wording. Is there any trick to getting the checklist instead of the flow? Thanks

Getting deep into SOPs and comparing also to other available scripts, I developed a (preliminary) full listiing of actions and corresponding commands for the PMDG 737-800NGX. Please find a list of (i) non existing or non-active commands, and (ii) other issues and questions. Of course I tried different verbiage, but no success. Thank you very much for your patience and help ! Giorgio Goggi 1- Non-existing or non active (NO reply, NO action): - Service interphone on/off - Chime - Fixed Landing Lights on/off (necessary for proper sequencing w.r.t. Retractable) - Wheel well Lights on/off - CTR (EFIS panel) - VSD (EFIS panel) - Engage/disengage…

Just installed this software again after some time off,,,got the latest version. When I go to the import scripts folder and select co pilot and select a script but the folder is empty does this mean I need to download that script from somewhere? I was sure I had scripts for certain aircraft before where as now none are there.

Hi fellas, Due to illness i haven't been using flight sim for quite some time. Trying to get back into it but i can't, for the life of me, get version 2770 to work. The check lists will work, but i have no flows. I bought the Virtualcol CRJ ( not the Aerosoft) and to my surprise, it worked really well including flows. I would simply switch the checklist file to the Aerosoft CRJ. Now, i can't find that file and feel rather confused. If i attempt to change that file now, MCE just crashes. Tried running the 'x pack MSI as advised on the forum but no joy. Any help would be much appreciated. FSX , Windows 10 64 bit (including latest large update whatever …

I followed the flow in PMDG NGX MCE.PDF and it all went fine but after take off Im not able to engage to Autopilot (MCE reports that instrument is dead) I have "Realistic AP Engagement" set to off - but it doesn't seem to help. Any ideas ? - thanks - Julian

Has anyone experience the volume of MCE drop to almost below audible (cockpit noise etc) when ATIS automatically comes up on the screen ? (P3D V4.3) It still works but hard to hear - looking for a way to disable ATIS displaying and playing automatically. Also is there a list of the WorkFlow order (for PMDG 737NGX) thanks - great app - Julian

Hi guys, got the BETA or RC version of the MCE by the FS++ Team. Installing was not a problem. Speech recognition as well. But insinde Xplane 11 FlightFactro A320 I got a grey square overlays on supported instruments. Why that? Put my licence key into the MCE folder to be licensed. Have you got any idea? Cheers

Any suggestions of a set to use as a base set in the meantime until you get around to getting one built ?? Hopefully on your to do list. Cheers

I cant seem to get Multi crew experience to recognize aerosoft a320 professional any ideas?

1st, what a great combo for with Aerosoft CRJ and MCE. I have been able to closely match a real world CRJ flows and ops. Truly amazing. One area that I cannot get to work is having voxscript set a specific flap setting. The command such as FLAPS EIGHT works as a normal verbal command when in the simm but when as part of a voxscript it does not work. The command FLAPS UP does work in voxcript but not a flaps to a specific number. I tried I believe all the possible syntax. The reason this is important is to creat voxcript commands for situations such as: Go arrounds/missed appraoches Balked landings Windshear recovery Stall recover…

Hi, I have my PTT button for vpilot set on my flight yoke. Is there anyway to set this same button to disable MCE while I am talking to vatsim atc?

I am running MCE for X-Plane and have created MyVoice Copilot scripts for a non-supported Carenado B1900D. However it doesn't seem to recognise the script folder name at all. What naming convention should I use for the folder in MyScripts? I have tried; the same as the X-Plane aircraft folder name (as was the case in FSX), the .acf file name of the aircraft in X-Plane? But when I look in the Voxscript button in MCE, the titles of the scripts are different. I do tend to manually create and edit the scripts in Notepad. Is there a step that I am missing? Another question: Is it possible to add a pause command within a Checklist, like with VoxScripts? Thanks for any…

In the next x-plane version, could you please include a command to stop the copilot listening that I can allocate to a joystick button? I currently have to lift up the googles to see where to click on the interface window. I use x-plane in VR exclusively. Unfortunately Clive will attempt to perform random commands such as “shutting down engine #1”, I guess based on background sounds. I would also like Clive to stop listening and executing commands when I speak to the cabin crew. Thank you. Craig.