The Multi-Crew Experience (MCE) Support Forum

Hello Everybody, Just wanted to let you know that Cereproc voices are discounted 50% right now. For me it is the best tts voices to use with MCE. The problem is that their voices are quite expensive. at 50% I just purchased 5 voices 😉 https://www.cereproc.com use coupon HOPPINGMADSALE19 (see https://twitter.com/cereproc ) Good flights to all...

Hi, I am trying to follow this procedure to create a new Voxscript to start de-boarding, because half of the time when I say start de-boarding MCE get confuse and he starts boarding. So I found those instruction on the forum and I am trying to follow them. "As there is a high probability (based on testing) that command "Simon request de-boarding" ends-up being picked up as Simon request boarding", to prevent speech engine screwing up, by requesting boarding when you haven't finished what you had to do, we left it out intentionally. Here is an alternative way to achieve what you have in mind. In Voxkey, create 2 custom commands, one to display GSX menu, and…

Any of the vets out there know if there is a way to extend the FO delay before they repeat the checklist item? For instance, starting engines takes a bit, so the FO will always say something to the effect of "Need more time, Cap? No problem, Start left engine" before you get the chance to get it started. I thought setting nagging off would do it, but that isn't the answer. Besides, the repeats DO come in handy and I would like to keep them, it would just be nice if the delay time could be extended. Perhaps it's something in the [PACE] in config, but nothing seems to relate to the action.

Hi, Is there anyway when we update MCE using the correct update procedure, that the checklists and can be kept? I have edited the checklists in some planes and each time I update, I lose them and have to re-write them. Thanks

Hi, Just A quick question, is there MyVoiceScripts files that someone can download for the PMDG 747 8 . I notice that the C:\Users\pierr\Documents\Multi Crew Experience\MyVoiceScripts\Copilot\Aircraft\PMDG 747-8 was empty. Also none seems to exist for the 8F. Pierre

Hi there I'm not using MCE ATC features in P3D because I use Pilot2ATC externally. I have set PilotSpeaksToAtc=0 Everything is fine except that when MCE starts up it opens a dialog box and asks for a flightplan which I don't need and is annoying. The mce.ini switch doesn't work: [ATC] IgnoreFlightPlan=1 I do run MCE as admin and P3D is admin too. Thanks for any help to stop the dialog box coming up when MCE starts. Appreciate the support. Glider

Hello, Firstly, let's get this out of the way for any potential MCE customers who are browsing here: you want MCE. I'm a relative newcomer, but I've used the FS***** competitor, and there's not even any comparison. MCE is far more natural and intuitive to use, and I've had a blast configuring it to use the procedures and checklists my operator uses in line flying. I find the realism eerie; it's THAT good. Now, onto the questions, for you gurus of checklist customization and Voxscript. The background is, I'm trying to configure our procedures exactly, for someone who will be coming on board with us to use as practice. I hesitate to call any technology based…

Hello, Is there a command to include in a flow that the co-pilot switch terrain on/off on his ND only ? Also i could not find the command for FO to push the "TO config" button

First of all, I would like to say that I don't fly without the guy you put on the seat besides me. Really enjoy the product ... The situation: This is extremely helpful since I fly on VR in the Zibo 737, using the WMR Samsung Odyssey controllers and a rudder only, so my interaction with keyboard or anything else is not there. I use the IVAO multiplayer or Pilot2ATC to talk to ATC be assigning the spacebar on the to "Push to talk", and I configure it on the WMR controller side trigger by using "OpenVR-InputEmulator" for SteamVR ... working like charm. The problem: The FO still listen when talking to ATC "even that he sometimes catche…

Hi, Does anyone know about a good written procedure on how to interact with the GSX ground crew. A flow that will tell me what to say and when. After 3 weeks of trying to get MCE-PF3-P3D 4.4 to work together I am now struggling with the proper phraseology to be use. A video would be ok, but I would prefer something on paper. Thanks Pierre

I tested the new MCE (v.2.7.90) with my PMDG B737NGX. Apparently there were timing issues, with the program seeming very slow at times. However. I realised, after several tests, that there were issues with VoxKey. Some commands did not work, others did. I inspected the key allocations and modified some of them. Strange enough, the situation worsened over a few test cycles. In the end none of them, particularly those painfully tuned for repetitions in order to control the timing issues, seemed to work anymore. However. The same commands, when issued manually by keypresses, were recognised and executed (i.e. manually pressing the corresponding keys worked just fi…

I am using Jeehells software for A320 on a full size sim. I emailed you about how to get the MCE to recognise this aircraft about 5 months ago, but have had no reply. Do you know if this is possible or not. ................Brian W

Hi Folks, I spent all my money on RW flight training so I'm stuck with my old FS9 setup until I earn a salary that's no longer eligible for public assistance. That said, MCE has been flawless using PMDG 747 & MD-11, iFly 737, W/FT ERJ & E-Jets. It has been hit or miss with LD767 and W/FT Airbus Evo. On occasion it will work with LD767 initially then drop out somewhere along the way. The FO responds but no action occurs. W/FT Airbus never executes an action. Thanks for any useful insight.

Finally bit the bullet and absolutely love mce. Great work on the dev's part- the flexibility and things you can do with it is incredible. I plan to get involved in VOX soon and really open it up. Giving simmers options is always a great thing! I haven't even played on a supported plane yet and already love it. This is a bit silly to ask, and I'm figuring everything else out ok, but can't for the life of me get the FO to follow my flaps commands. It's a Saab340, which I know isn't supported, but I'm pretty sure FO can still operate the flaps. He will only follow if I say "flaps up". I can't get him to put them down, whether I say "flaps 2", "flaps 15" (the angle), or…

Is there a way, or could there be, to mute the mic using a configured keyboard key or joystick button rather than clicking the mic icon? I have simulator sound through my pc speakers and MCE & Squawkbox / iVap sound through my headphones, however the MCE FO has a habit of picking up spurious sound from the speakers and misinterpreting it and performing weird actions.....even once turned engines off mid flight! Ideally it would be better to allow a key / joystick press to speak to the FO, as one can with ATC.

So, I have been getting back into Flight Simming and and just wanted to install MCE again. However, I lost all my original info/invoice from when I originally direct purchased of MCE and and contacted support to look up my info. Purchase when they originally came out with this addon They refused. The support people from MCE rejected my request to look for my info even though I provided all the personal info I purchased the addon under. Even sent my info from my original email address that I still have after 20 years of residence in the same house I owned and same address. It's really me stupid! So a warning to all you current and future customers. Be careful no…

Hi, I just installed the new version of MCE 2.7.9. When I start P3D 4.4 and MCE. I get the message "copilot Listening ...on Boeing B77L" but when I ask for "Preflight checklist" nothing happens. I cannot talk to the co-pilot. I know my microphone is working I ran the "app wizard" and everything was find. It's been a wild since I use MCE, but should I get a welcome message from the co-pilot? https://drive.google.com/open?id=1ZFZo54ZmL64XExI7rnpnIwtXWqi7EOGT Any help would be appreciated Pierre

Team, I have a favor to ask: Would it be possible to add a variable in the mce.ini that would allow the Copilot to automatically turn on/off the landing lights (and taxi lights) without a verbal command? I was thinking something like: lndLtsMSL=10000 //once the aircraft passes this MSL, the copilot would turn on/off the landing lights. Also, is it possible for the copilot to automatically execute flows prior to a checklist, or have certain actions identified within the checklist itself ? As an example, imagine the pilot calls "before start checklist', could a line be entered into that checklist that would cause the copilot to execute the before start…

Hi, In RC4, when there is no approach control at an airport, the center control transfers you directly to the tower. Every time from that moment on, Lorna, my co-pilot, no longer answers the Atc and doesn't contact the tower, even if I repeat to her that she has ATC and acknowledge receipt. Thank you and Regards,

I can start speech training and choose eg. "user interface commands" and then i hit start, and nothing happens It´s the same with all the other choice options

how can i use mce without it opens p3d4 atc.I always fly online so i don`t use the flightsim atc. When mce runs trough the flows or checklist it opens other windows , i use virtual cockpit inthe MJC dash, the screen is halve black , I have to click with mouse to get the whole VC back. regards wil

Hi, using many VoxKey commands in flows, I realised over many tests that there might be some loss of sync between VoxKey and the OS, each one having its own internal timing. The command (in voice or writing) is given and recognised, but the action may be performed or not, depending on circumstances. This behaviour is less frequent with single-keystroke commands, more pronounced with double-keystroke commands (e.g. those containing modifier keys, such as CTRL, SHIFT …). A possible workaround is to use the VoxKey command with repetitions (built-in, from 2 up to 7 times!), but this is not always possible, since some commands operate in toggle mode. According to m…

Hi, The co-pilot seems lost with the heading and altitude controls. If I ask for an altitude, the knob turns endlessly in the wrong direction. It only stops after a long time. The same thing happens with the heading. MCE et Maddog last version. P3Dv4.4 Thanks and Regards, Richard

Hi, at engine startup, the ground operator at times notifies “rotation”, “ignition” during the process. But not always. I enquired with GSX: this is not part of their “Notifications”. What are the conditions for this to happen? (start before/after/during pushback, other ..). Thank you for your clarifications, Giorgio PS: Pease look also into the VoxKey sync/timing issue I posted on 12.2! Thanks Using GSX-2, MCE 2.7.88, PMDG 737NGX, Win10 Professional, P3Dv4.4 Pro

Halloo, After an 8-year hiatus from flight simming (brought on by having a child), i've quite happily re-entered the realm and discovered MCE! Don't know why I didn't find it back in the day but am very glad I did now. (oh and i am now the proud papa of an 8-year old flight sim fanatic as well!) We have a question about the reference files found in program files x86/multicrew experience / reference. Our newest a/c purchase and obsession is the Captain Sim 757 III. There is no entry for a 757. I am not sure of the relevance of these files, and if I should create one for the CS757 III? If it would seem wise to do so, how would I name the file (given that the…