The Multi-Crew Experience (MCE) Support Forum

Hello, is there a way to prevent MCE to open or close doors when asked by GSX. In the FSLABS bus all interaction with doors are already implemented internally, so we end up with doors closing opening closing re-opening etc. Thanks

X-plane 11.34 and latest zibo 3.34. It will tell me MCE DLL's are missing All other supported aircraft's are fine. I understand It's constantly under changes and pretty much beta so just leaving this here as a bug ticket.

Hi All, How do I trigger an action in my flow based on a certain config? For example, I am trying to automatically trigger the after takeoff flow (FSL A3X) when setting up flaps to 0. I couldn't find the documentation for this. Is there something I can look at to give me what is possible with custom flows? Thank you in advance

Hi guys, since about a couple of days XP11.31 CTD when I start running the MCE via the internal plugin. XP11.31 log file says: FF320 XPlugin: Message received ...this application crashed ...or similiar. simulation : XP11.31 +FF320 0.9.4 There might a conflict beetween FF320 and MCE. The MCE app starts running and after about 20s XP crashes down without warning. What I tried by now: steam client searching for bad files fresh installation of FF 320 fresh installation of MCE running XP w/o MCE causes no problems 🤔 Does anybody out there has any problems as well? Save landings. uhecht

For some reason, none of the flows I have installed in the MCE folder and copied in the documents folder appear when running MCE. Default ones btw. I have had MCE for quite some time, but I reinstalled for P3D so something went wrong when I reinstalled MCE.

My Windows installation has just updated. and now considers MCE to be a virus. I had to reinstall and set Windows Defender to allow MCE. JUst a warning really.

Hi, MCE is crashing on every flight about 60 minutes in. It fails with PMDG 737 and 738 with P3D V4.1. MCE just freezes up and crashes. I've updated to the most current version. I run as adminstrator. Any ideas? Thanks, Doug

Hi! I just installed an A2A aircraft, which the installer puts in “My Documents“ or something, but not in the sim folder. And then MCE doesn't “recognize“ it. Can anything be done about that? I've added the path to the simobjects.cfg, but it didn't work. Thanks! Kind regards, Dimitri

P3D 4.5 hotfix out guys. https://www.prepar3d.com/latest-news/

So I just stating out and installed MCE for P3D v4.What is the first thing to do start p3d or MCE also I want to run it with pmdg 747 v3 so I load up my 747 in p3d then MCE in cold and dark state and now I need to know what I’m suppose to do?Do I start talking into the mike and say start checklist or something else.Can someone get me started please would be much appreciated. Thankyou in advance as I will be asking more questions so I will keep this tread going until I understand what to do. Regards.

I’m interested in a purchase can you tell me what documentation does the program come with.Like setting it up and tutorial and any other? Regards.

HI, Can I ask the Preflight procedure to be done without starting the APU, I would like to use the external power. If yes what do I ask for? Pierre

I have voice output through my speakers, yet all other sound is in my USB headphones. Any ideas?

Can someone tell me if MCE is working alright with fslabs A320X v4? Regards.

Hi, I'm running FSX-SE w/ MCE and had the Go-Flight functionality working perfectly. I've done a lot to my system including scenery upgrades and somewhere along the line this has stopped working. I've verified MCE.INI has "Use=1" under the Go-Flight section - timeout is 3000. I had FSUIPC4 installed but have removed it completely but Go-Flight never opens the ATC window to start the search for the airport when I tune the tower freq. I have the Saitek radio switch panels. Since I removed FSUIPC, is there something I have to do with the Saitek driver to get this going again? Any help is appreciated...thanks, Bob.

I had a crash on my system and replaced the 😄 drive SSD which was faulty. I have reinstalled MCE and added my registration.txt file but MCE tells me to register the program. Using X-Plane by the way.

Hi, I've recently purchased PF3, to go along with MCE and have a few questions regarding it's intergration with MCE. I started a new topic since there are over 19-20 forum pages about MCE and PF3 along with numerous sub topics and its becoming hard to decipher what is current and what is outdated. Since the PF3 manual and the MCE manual have not been updated with the most recent changes (MCE still showing info from PFE and PF3 now up to Ver 3.9), I was wondering if someone has a definitive setup for ease of integration between the two programs. I also have some questions: 1. What hotkeys can I expect to work with MCE? I've been flying and it seems tha…

Is anyone using MCE with the AeroSoft CRJ? I downloaded and installed the demo but I can't get the F/O to follow instructions. He acknowledges and says he did it but nothing happens. Example Set Altitude 5000 or Set Heading 210. It works with the Carenado jets but not the CRJ. Thanks ... Richard

Upon looking in the %programfiles(x86)%\Multi Crew Experience folder, I noticed a Navdata subfolder. What purpose do the files in this folder serve, and is this navdata updatable somehow? By the looks of it, the data in there is quite out of date. Thanks!

I just completed a flight with the PMDG 747 8i v3, there is a known problem with the FO switch in the vhs mic off when tuning the radio. I forgot this today and i miss a AtC handoff because of that. So i wonder, is there a way to find what frequency you should be monitoring at different stage of the flight? Pierre

Hi I am trying to assign one of my Yoko Yoke buttons as PTT in MCE for the default ATC without luck. When in the ATC setup menu the option for button 12 is just flickering and when selected nothing happens. Using the default delete button works without problem so its not a communication problem. Don't recall I had this problem back when I had a Saitek yoke. Any ideas, could it be a compatibility problem with my Yoke? Mike

Hi, I found that when I ask my co-pilot to switch radio frequencies that after switching the standby frequency to active, he also presses the VHF 1 transmission button. I then have to manually reclick it to be able to communicate with ATC. I've tried the following commands "Set/Tune comm one to 1 2 4 . 7 5 / Clearance Delivery / Ground / Tower" Is this a bug or am I doing something wrong? Thanks and kind regards!

It is really frustrating and I gave MCE another try. So what did I do: Deinstallation of MCE, Hard delete of any remaining files in the core folder of MCE Fresh install of FF320 via X-Updater to version 0.9.7-2267 Fresh download of MCE V1.3.85 Installing FF320 Starting XP11 with no problems Installation of MCE Configuration and registration via license key file starting XP11, FF320 -all works fine starting MCE and observing MCE starts normal until the point when the app is searching for any changes CTD ->MCE still running but XP11 has crashed down So what the heck is going on? Seems t…

I am using PF3, and when i fly over the ocean i have to follow oceanic procedure. With MCE how do i get my FO to make the inital contact with Oceanic and what do i say to him so he will report our position when required. For the last to days, i have cross the atlantic from Gander to Shanwick twice, in both case I have lost ATC communication. I guess it is because i didn’t report my position when it was required. Pierre

Hi I have been using VoxATC for my ATC sessions in P3dV4 for a very long time but the way VoxATC handles AI traffic (aircraft disappears, they run in to each other etc) I am very tempted to go back to using default ATC. I love many features of the default ATC system including how it handles AI traffic. I know It has shortcomings including lack of SID/STARS, approach controllers that send you back and forth on approaches etc. Many things can actually be done to improve this however including updated Nav data from FSAerodata, the fact that you can request a different approach to avoid the nagging controllers and of course use MCE for speech recognition 🙂 Now to my…