The Multi-Crew Experience (MCE) Support Forum

When starting PFE I get an error saying hotkeys not recognized? xplane 11

Gidday, RE. PMDG 600/700 EXPANSION PACKAGE (P3DV4.5) Variations: PMDG 737-600NGXu PMDG 737-700NGXu PMDG 737-700NGXu BW PMDG 737-700NGXu SSW Ran a few flow tests and all seems to be in order using 800/900 flows, etc. with a few changes noted so far. 1. There is no Trim Air switch 2. Only one Recirculating Fan switch. "right recirculating fan on" or "right recirculating fan off" operates the switch. Harry

Hello Gerald, just a quick question. I´am sure this is answered somewhere already, but i don´t wanna search al the threads. I plan to move my PF3 from my P3D machine onto a client in my network. You have a discribed at your FAQ what needs to be set in the mce.ini for the same scenario but for RC4. Am i right, that those settings are the same for the scenario with PF3?

First and foremost, I think MCE is a great concept for alleviating the pilot load in a flight simulation environment. I am experiencing some issues with the PMDG 737 NGXu. On the approach, any command to push the APP button and also to disconnect the autopilot do not appear to work. In the former, the copilot responds with the fact that autopilot and flight director should be selected for such a command (APP) to be selected (autopilot and FD are both switched on anyway), and there is no acknowledgement in requesting the disconnection of the autopilot. Please correct me in my expectations of MCE, but should these functions be enacted by MCE?

Happy New Year to you both. Working on flows for the iFly 744. A couple things noticed. 1. Flaps 5,10, etc. no action. However FO reports having set them. After setting them manually to say 10 and then saying "Flaps 5" no action but saying "Flaps Up" works ok. 2. "All Fuel Pumps On" All switches turn on except OVRD FWD RIGHT and OVRD AFT RIGHT 3. Transponder TARA or TA RA only goes to TA 4. When all four hydraulic demand switches are set to auto saying "hydraulic demand one off", "hydraulic demand two off", "hydraulic demand three off" work but "hydraulic demand four off" no action 5. When beacon light is off saying "beacon light on" no actio…

Hello, I have a problem with a number of callsigns. Some of them aren't recognized by the FO, which leads to him not responding to ATC by himself. If I then ask him to "acknowledge ATC", he only reads back a basic "Roger 9022" (the callsign being Wizzair 9022 in that example). This at least satisfies ATC, so I guess the right key combination is pressed. Until now, I've encountered this behavior with the callsigns Turkish, Wizzair and All Nippon. Lufthansa, on the other hand, works without a problem, so the connection between MCE and PF3 is given. I can provide the PF3 logs if required. Thanks!

Since the latest update, the checklist reading by my copi is going much slower as before. After each reply from me it takes 3-4 seconds until he goes on with the next checklist item, which makes the whole process too slow. Is there a way where i can change this timing? Cheers

Hi Fellas, Thought I'd setup flows for this plane seeing that I have it. Unless I've missed it somewhere, there is no configuration for the iFly 748 in MCE. Not sure how many others have it so it's you're call if you want to go to the trouble of configuring it. Harry

Hi, Been setting up flows for the PMDG 747-8. All good except for the following that I've found so far. Not sure if these have been reported previously. "Trim Air On" only turns on the left trim air switch "Trim Air Off" only turns off the left trim air switch "All Packs On" turns them on but "All Packs Off" does nothing. Have to say "All Packs On" again for them to turn off "Emergency Lights Arm" arms them (from the off position) THEN "Emergency Lights Off" turns them on THEN "Emergency Lights on" turns them off "Engine Anti-Ice Auto" doesn't go to auto "Wing Anti-Ice Auto" doesn't go to auto Harry

Am back being unable to use MCE due to fsInsider.dll. Identical to topic started 39th Sept 2015 by myself. All was working OK for quite some time using version 2.6.7.3. Then, for some reason, FSX was not able to start up. Renaming fsInsider.dll allows FSX starts up OK. Reviewed all the help suggestions from back in 2015. Never did get a fix and ended up doing a complete reinstall of my entire system to get MCE up and running. Am not going to do that again and will just give up trying to use MCE if no easy fix is available. I really enjoyed MCE when it was working and the FS++ crew put a lot of effort into helping me right from day one many yea…

Hi, my voice does not get recognized (no reaction from Copilot, no red "voice bar" on top of the screen". I am on German Win10 pro, installed English US, installed MCE (the SAPI thing happened automatically), ran through voice training twice successfully. I am new to Win10, so probably I did something wrong. Thanks for the help. Peter I recognized, that it takes a long time to open the Run App Wizard

When you are inside VR cockpit in X-Plane 11, every single details matters ... traffic, ATC, FO, crew, background boarding and landing music, you just feel there, last thing you want to break your immersion by switching to desktop or remove the headset to do a task your FO should do. I want to show case this plugin which I really prefer when flying VR and online, it is super helpful .. Multi Crew Experience (MCE), what is does; it makes a whole aircraft crew under your command (voice command), a helping hand inside VR, many can understand me when struggle trying to change the squick code , with MCE you just tell the FO and he'll do it for you, check lists, li…

Hi, I setting up a new PC and would like to use the flows I created. Where do I find them. I can find the flows which come with the installation but not my own.

Since the install of ver 2.8.10, I'm having a minor checklist anomaly. I have a few checklists that have in them a challenge and response for altimeter and other items. The checklist below is one of them. The problem I'm having is that the FO no longer repeats the response for altimeter, anti ice and flaps . For example when he reads the checklist item "VSI," I say "1200 Set" he repeats "1200 Set", however when he reads "Altimeter" I say "29.92 Checked and Set" he says nothing and moves on to the next checklist item. He responds correctly to Trim, but not to Flap, even though they are written exactly the same. With Anti Ice, I say "off, on, or set", he say…

Hi folks. I was experimenting with the demo of FSDT 2 Jetway implementation and came up with a one line command Vox Script that activates the Jetways and runs the boarding flow at the same time. It can be used with three Jetways at once, or just a single one. This could be useful for anyone on VR. Also demonstrates the power of Vox Scripts and Vox Key. It's at KLAX, since you can use FSDT 2 and all the features at FSDT KLAX, as a demo...(I haven't got the full version FSDT yet) 😉 Here's the video: Regards David

Before when I used this software I could load the 747 and get the voice to do all checklist and setup without using a mike but now I cannot find the way to do this with the newer version of MCE.

Hi, just upgraded to Win 10 (I believe 1909), and on my first real flight something is driving me mad: As soon as I press the PTT, all other sound go almost completely quiet, except for the transmit sound itself. Even the FO is quieter. After 10 - 20 seconds, the sounds come back at their normal levels. I've already looked into all the Windows settings I can image (do nothing when Win detects comm activity, focus assist, narration), but it persists. What am I overlooking? Thanks

Hi Guys, I've just explored the config file, and I'm wondering how some of the settings work exactly. It's not in the ordinary manual and I understand that fiddling around in the config can be dangerous, but what do the following settings do exactly: TrainingCompleted=1 RandomFailures=0 TweakFsConfig=1 LoudData=0 AllowActionOnEvent=0 [SKILL] Tol3=030,030,400,900,100,100,100,050 Tol2=020,020,200,700,075,075,075,030 Tol1=010,010,100,500,050,050,050,020 Tol0=005,005,050,300,025,025,025,010 IgnoreFlightPlan=0 FlightPlansPath= FoAlwaysDialsVHF=0 FoAlwaysDialsAfs=0 [SPLASH] NoSound=0 [CAT_III] FlightCa…

VR is the only way to go for most people once they actually try it, and MCE pairs perfectly with it. Is there anyway to assign the PTT button to one of your touch control buttons rather than a key or joystick? For the ones who are playing with touch controls only? The goal being to mute MCE recognition and be able to transmit on VATSIM etc. I have noticed that If you go into settings in x-plane itself, there is a control option for "MCE Push to talk" but assigning it to a VR touch control button does not see to suspend recognition.

Gerald, Noted yesterday: The recirculating fan switches are non-responsive Stabilizer Trim switch covers don't close Might also apply to the 772/3 as well. Haven't checked. Harry

airport info seems out of date, some runways have been renamed, anyway to solve this?

In X-Plane, I find the co-pilot only says 'minus' and doesn't give a value when reading a METAR.

I use Better Pushback to push the aircraft back, is there a way to disable the ground pushback, as I keep killing him.

Hello, I just have a quick question: If I have P3D installed outside of the default c:\Program Files folder, can I do that for MCE as well? If so, I could install it to a SSD. Thanks Dimitri

Aerosoft just released version 1.3.0.0 of the Airbus 318/19/20/21 for P3DV4. Looks like they've had a go at changing things that affect MCE. I'm guessing to fall inline with the new A330. Should be interesting as I assume any changes you make to this version will adversely affect those still running previous versions. I've started testing and so far the following flow commands that worked on previous versions no longer function. I assume the reverse also applies, ie. off vs. on if not shown below. engine one generator on engine two generator on hot air on air conditioning pack one on air conditioning pack two on apu bleed on engine one bleed air…