The Multi-Crew Experience (MCE) Support Forum

Hi Can anyone help... When using the latest Demo version of MCE[v1.5.3.2], together with X plane 11.41 and the Flight Factor A320, all I see in the cockpit is every control button & screen in 'Green blocks' including 2 manikins seated in the flight officers & captains seat? Uninstalling the software reverts my FF A320 back to normality. Can anyone shine any light on this issue. Thanks.

Does MCE work with GSX? or do I need to setup like voxscript commands to press the buttons, also.. Can I speak to the push back guy directly?

Hello, I have been using MCE with the PMDG NGXu the past few weeks, and have had a great experience customizing everything to my specific airline. However, I would like to change the responses to certain commands. For example, when I command "landing gear up" I would like the FO to respond "Positive rate, gear up" instead of the default "landing gear going up" then "landing gear up and secure". I have tried creating a voxscript titled "landing gear up" with "positive rate, gear up" as the response, but it gets caught in a loop and I have to restart MCE to get out of it. I would also like to edit the flaps responses, to "flaps 1" "flaps 5" etc. Does anyone have a…

Hi guys when I press my PTT button on the yoke I get a high pitch tone constantly until I release. I’m deaf so have hearing aides and this tone rattles my brain 🤣 can this be changed to something else like instead of the constant tone just a split second to know I’ve pressed it kinda thing

Hi Guys is there a way to setup cabin announcements for like Boarding and the safety announcements

Hi Guys I’ve used voxatc for years since fs 2004, but the support and updates from the developer is dead and I would like to move forward with P3d 5. Does MCE use voice recognition for Atc? And I don’t mean like say 1, 2 3 for it to use an Atc menu, I’m looking for similar to voxatc with full phrases ie, “channex 23 request startup” etc I use AIG for ai And Orbx so would need to work with these too? Any advice, feedback?

I went through VoxScript manual a few times but I can't figure it out if this is possible. Can VoxScript make key presses? Let's say I say "We are the champions" and the resulting command is a "Shift+L" key press? If this is not what VoxScript is designed for, can this be achieved some other way with MCE? If not, is this achievable in any other way in P3D?

I downloaded the demo and tried a flight with the Aerosoft CRJ Pro, and this doesn't seem to at all do what I was hoping. What I want is something that will help me actually split the workload between PF and PM, without voice commands. Basically, I want to be able to set duties for the PM that will be carried out during the checklists. Something like what happens with Aerosoft's Airbus Professional copilot function, but more customizable so the PM doesn't just do all the work for me. As it is, all this seems to do is read the checklists off to me that I already have in documents, and follow voice commands that I have to correct 4 times because it hears the word "to" a…

I'm scratching my head on this one. With Majestic Q400 I don't get the ramp coordinator (you know, my name is Marko and all this) and as a result no GSX commands work. Copilot works and even if I say "Cockpit to ground" they answer but no response to any of the GSX commands. What could be the problem?

Hello, I've been using this application for about a week but I haven't yet got it to work properly. Every time I open the application it works for seconds or minutes then the application closes.

Hi, What about MCE for P3Dv5? Sorry, I've been doing some research, I couldn't find anything on that...So. Thank you and Regards, Richard.

I'm running Win10 1903 and AORUS Master motherboard with onboard Realtek sound and the current driver. With MCE and Radar Contact running in P3DV4.5 my voice (communications) volume drops after a short time even though SOUND > COMMUNICATIONS is set to DO NOTHING. After playing around with various settings I found that after startup if I went to SOUND > COMMUNICATIONS and ticked REDUCE THE VOLUME OF OTHER SOUNDS BY 50%, pressed APPLY, then ticked DO NOTHING and pressed APPLY again the problem didn't occur. To keep from having to do this every time I start the system I created a batch file using notepad that I named COMM.BAT and saved it to the desktop. This…

Hi, I purchased this a few days ago when it was discounted. Nice planes and should be supported by MCE according to the website. However I can only find and operate checklists in the MCE documentation but no flows or such. Without flows I find it very hard to operate the plane together with Lorna, who sits in the right seat. Furthermore she can not handle the autopilot settings or even lights, which she usually should. Can anyone help me with her job? Cheers Karl

Everyone should upgrade, performing a full un-install re-install of the new version and not use the patch Thank you

I have added dlls manually and also uninstalled and reinstalled, the copilot runs through flows and checklists. But no actions take place. Was working fine with 11.41.

I purchased the ToLiss a319 yesterday on a discount. Great plane, however, I can‘t get Multicrew running correctly. I have the latest version and it recognises an A319. But no flows work (e.g. power up etc.), while most commands seem to work and the checklists, too. Any idea?

Hi, just wanted to ask if the new Xplane ToLiSS a321 will be supported - or even if it can be used with the a319 profile, which is a supported product. Have a nice Sunday and stay healthy!

Hello, how are you? Forgive me for the very bad English. I am having some difficulty starting DH8Q400 using MCE. The sequence of flows that I'm doing is as follows: After loading the plane: ("). With the plane in dark: aircraft power up with apu. After the power up: before start flow, And I can't get past this point since when I ask the first officer to start the engines nothing happens; I know that the dash8 is a complex aircraft, however, who can start a pmdg should be able to start a MJC, right? Thank you very much to anyone who can help me clarify what is missing!

There are several commands I cannot get the F/O to execute in the Embraer v3 jets. 1.) Raises the flaps but will not lower them. 2.) Raises the landing gear but will not lower it. 3.) Responds to taxi lights on and off but doesn't do anything. 4.) Does not respond to runway turnoff lights. Feelthere labels them as "SIDE" lights. This is my first Embraer with MCE so I don't know if this was working in a previous versions. Thanks for any help or suggestions. Richard

I see a new version for X-Plane is available... I don't see mention of it on this site and am wondering what has changed?

Hello to my fellow MCE users from Ron Kolesar AKA The Blind Pilot. I could use everyone help on the following please. I'm looking for a set of checklists and voice commnads from pre flight to shut down for the DF7X and still looking for a blind friendly version of the DF7X seccesser the DF8X. If anyone can help me out with this to be able to fly better while using the DF7X and hopefully the DF8X, I can be reached at: [email protected] For those interested, I was able to grab a awesome DF7X out on the Fly Away Simulation down load library. Which that address is at: www.flyawaysimulation.com Then go to the down load library …

Hi, After a reinstall of windows I have had trouble installing PFE2xp. I use the installer and direct it to my xp .exe as requested but when I direct it to the PF3 .exe location it states that I need the 3rd party atc PF3 for the plugin to work and the cancels the install. I have also noticed that the registration text file has no information in it and the .ini file shows no location of the PF3 folder? Any ideas on what to do next? TIA Jay.

The beauty of MCE that can take the load F/O tasks, so you can enjoy flying as real as it can get. In VR in particular, you don't want to open menus or sneak to the desktop to start pushback for example. I use "Better Pushback" plugin in X-Plane, which is awesome addon, but I wanted MCE to do the job for me, and I came across this, maybe some knew it before in P3D for GSX I think, but here is the way for X-Plane: - Open MCE General tap, tap "more options" - Tap config file, press ok - Go down until you find [MECHANIC] section -Change the value of "PushWithGSXandAES=1", save the file Now in X-Plane, I plan the pushback be…

Working through TFDi 717 "left engine air bleed on" works but "left engine air bleed off" doesn't. Have to say "left engine air bleed on" again to get it to turn off. No problem with the right engine air bleed. "irs nav" or "irs align" or "irs one nav" followed by "irs two nav" sets both to "nav" as expected but a banner always comes up after suggesting to re-phrase the command. Unfortunately I have to do all testing on the ground as the plane has a bug that causes the sim to crash when changing views. Apparently Lockheed Martin are working with TFDi to resolve this. That's it for the moment.

Hello there ! After several years not being able to use MCE with my old PC (never figured why but it never understood me), I've finally gave it another try and it works like a charm so... I'm finally in ! These days I'm flying the 787 from qualitywings, I already customized a bit the flows and had a few questions about it: - I saw it does not read the Vspeeds from the fmc, is that normal? To my understanding, MCE is supposed to get the speeds from the fmc, the use data feature is enabled in the monitoring tab, tried to disable it but it does not seems to help, I guess I missed something - Is there a way to prevent the co-pilot to open the 2D eicas panel? …