PMDG 777

Good evening, I have brought the pmdg 777 based package in July 2016 and now in the end of September 2016 I lunch my fsx:se and select one of the 777LR aircraft and it<s ask me again my key activation word and now I don<t know what to do! I have try to connect into my profile on PMDG to look for the one that I have purchased the aircraft but they say that they was never a account created with that email. NOW I REALLY DON<T KNOW WHAT TO DO AT ALL! So I've created a another account to say this to you and I am really frustrated about this. I have tried with my both email address that I usually brought this with and nothing at all not even a wrong password enter.…

Hi, Have i missed information or does your Taxicam work correctly with Prepar3D3.4.9 ? My CAM is frozen . I have only updated Client though Thanks Michael Moe

As title states - I can download enroute winds & current alternates but I can't find a way to download weather for 4 alternates present on ALTN list. I have FMC set to automatic loading of plan to sim including alternates (and including automatic WX file creation). I checked PMDG folder in P3D for presence of WX file - it is there. When I press WXR request in ALTN page it says: "request sent" and then disappears after around 15-20 seconds without any further communication/action. Any clue why it might not work? When I go to map in sim I can see the route being updated with the alternates so they are part of P3D pln too. UPDATE: Not sure what I have don…

Hello, Although Failures are turned off, i got a message after takeoff and retracting the gears : Gear Disagree all Wheel were retracted except the left rear gears any idea why this occurred, and why not retracting. thanking you in advance

Hello, First time poster, long time flyer. I reecently purchased the 777 after signing up to take part in the cross the pond event. I installed and activated and when ever i load up in multiplayer on FSX:SE i get the no gear, no guages bug. I have checked i am running as admin, reinstalled simconnect (all 4) reinstalled the 777. Checked the audio settings are correct, FLEXnet is running, even contacted support who haven't managed to find a solution. Does anyone know any thing i am doing wrong? EDIT - I have just loaded up fsx and it worked in free flight then i quit back to menu and retried and back to the same issues. Seems very intermittent. Thanks, …

Hello, I have a problem with the 777 being unable to fly. The screens only update every 2-3 seconds. This problem occurs at any random moment but only while in the air When the problem happens this shows up in the log readPrecipData: Previous cycle not finished. Aircraft update lock is stuck at 56; unlocking Aircraft update lock is stuck at 56; unlocking Aircraft update lock is stuck at 56; unlocking I hope you can help me with this problem, Bart Stoop

When I set a step climb in the FMC by typing /410S for example, it accepts the value but all following waypoints remain at the original altitude (fl390). This doesn't feel right. Can anyone help?

Hi everyone. Why sometimes in the flight path drawed on the display, the turns between one waypoint to an other looks like this odd shape? Thanks, Senén Castillo

Hi Guys, I was just wondering if there are any plans to include the GMCS "within" the MFD for FSX, as it is in P3D. I have a pretty smooth setup of FSX and with the CAM selected I am getting a reasonably "respectable" 19-22 FPS. This is definitely usable and I can live with that for a few moments, especially useful when turning into the Gate. Is FSX limited in letting you incorporate the GMCS view within the MFD, unlike P3D? Thanks and look forward to any replies PMDG may have. Regards, Dinshaw Parakh.

I recently upated windows 10. Im having problem updating my Pmdg 777. When i do put in the activation it, It tells me that it cannot connect to the server and my activation key is invalid, Please help. Thanks.

Having completed a clean install of windows 7 64bit. Running P3d 3.3.4, I have installed the 777-200 and 300 but the landing gear is missing, the screens are blank and the yoke is full left. Each time I load the 200, I get the activation window and each time I enter the serial key I get a 'successfully activated' message, only for it to load into a 'dead' aircraft. I have removed/reinstalled all 3 simcomment installers, with reboots inbetween and and here we are making this post in the hope of some help. I shall send a support ticket in pretty much consisting of the same info.

Dear pmdg, I have reinstalled the 777 200 lr on my pc today, but I get an activation error, it says that there's no valid activation, and unable to connect to the activation server What can I do to solve this problem?, this issue has never happened before, I have also opened a new support ticket on the pmdg support. Hope you can help me to solve this problem thank you. morten van der linden

Here is a clip. It happened when the aircraft is banking to the left with no reasons and I disconnected the autopilot and intended to correct it the direction. The product is licensed and activated and I still can't figure out what led to such a strange phenomenon ...

Good evening all, I was hoping to get some guidance. I finally managed to save up and get a copy of PMDG's 777-200 base for P3D. Install seemed ok, but i cant activate the product. I put the serial in and it says, ERROR: Unable to connect to activation server. I'm struggling to figure out the issues. I have read about ports and other things, but nothing seems to work. Any ideas/help/advice appreciated. Thanks! Mike Jasinski

Due to major update on windows 10 , Im getting a reactivation required notice and then a too many reactivations, access denied notice. Can this be rectified, since it is a screw up by Microsoft. Any help appreciated. Ron Service

My son just landed an empty 777F at 7N1 and used less than half of the 3269 ft runway. Is this realistic? If you want to try it you'll have to get the freeware 7N1 by Jim Cook from the library. Here's a picture of it, he touched down right at the beginning of the threshold. http://tinypic.com/view.php?pic=9vglsy&s=9#.V8eb7a0S2M8

Word is out on the various forums that LM P3D V 3.4 has been released. So the question is.... Will there be any compatibility issues with the 777 ans NGX. Thank you Randy

Hi all, I'm building my home cockpit for pmdg 777. In addition, I'm working on Fuel Control Switch and Engine Fire Handle. Up to now, I can get the data of APU Fire Light (Red Light with alarm) via sdk and simconnect but I can't get the data of Engine (left and right) Fire Light. I tried to find all variable in SDK but there is no for these :( . Any suggestion for me ? :smile: Regards, Duc Trinh

I am also facing now a new problem. after landing Autoland, the autopilot won't disconnect in any way. whatever I do it remains active ........... very weird issue never experienced it

Perhaps just imagining; but seems that after arming Loc, that the " LOC " (captured) annunciation appears earlier than it should. Better than never I spose' ~ Changed to this (seeming) early capture behavior about a month (20+ flights) ago. Captures before the deviation pointer shows any sign of life and at ~10nm from threshold and ~3nm from runway centerline (extended) and on 30 degree intercept. Is there an easy way to test / verify correct localizer capture. Best to all, Ken Boardman

Using Prepard 3d and PDGM B777 and Navigraph to update the FMC with the latest NAV info. but its still stuck with a 2013 revision in the FMC and Navigraph dosnt look to be up dating to REV-1610 the current version. am i missing a link some where thanks Stephen Bottom

Working through Tutorial #1.5, I've come to "When prompted, line select the GPS position and place it into the SET INERTIAL POS field". But after selecting GPS POS into the scratch pad, nothing happens when I click on LSK 5. What have I failed to do?

Hello, im planning to buy me a new PC for FSX with PMDG 777-200/ER. I want to know what do you think of this PC: http://es.pcpartpicker.com/list/62gLcc or http://es.pcpartpicker.com/list/dHFdbj. Thanks you very much.

I am starting with Tutorial-1.5 and have succeeded in placing the B777-200LR/F at the correct place in Dulles. I have also set it to 'Cold & Dark' by using the method at the end of Tutorial-1.0. I then saved the 'Flight' (or 'Scenario' as P3D calls it). But when I start on the process of "Getting Started", after turning on the battery and running the APU and starting its generator, I find that the Captain's PFD and ND and upper ECL do not initiate - the screens are blank. The First Officer's PFD and ND come on normally. I tried first reloading the Scenario I had saved: No difference. Then closed/re-opened P3D and re-selected the Scenario. Same result: No Capta…

My hovercraft lost his wheels, not sure how to fix this one. Restarted, loaded a default aircraft then loaded the PMDG one. No luck.