The Prepar3d Forum

hello, I have a problem with my P3DV4, when I play the game when it is loaded, suddenly the land is non-existent or transparent, it only shows Taxiway, Runway, House, etc. What is wrong is there anyone who knows the solution? Thank you from Indonesia Farelsssssss

Is there a DFW scenery for P3Dv5? Thanks

Anyone using Captain Sim 767ER released for P3d v5?

I Don't know where to begin .

Any recommendations or advice on setting "tweaks" for the NVIDIA Control Panel? After updating my graphic's card driver, I usually apply defaults to my settings. However, I'm interested if anyone has tested the settings for better performance. I'm running a reasonably high-end system, overclocked, yet with FSLabs A320 and PMDG 737NGXu, performance is now an issue. I hope LM brings v5.1 soon 🙂

When I bought the new version and installed it for V5 I installed it for V4 which got rid of my profile. Now I'm trying to set it back up again and I've noticed something weird when calibrating my yoke. When I start a turn if I hold the yoke in position the plane stops the turn dead in its tracks. Say I'll be turning left then turn my yoke for a right turn if I'm not continuously moving the yoke the plane will stop the turn while still in a left bank even though I'm trying to turn to the right. Any idea what might be causing this? I have the axis controls set direct to FSUIPC so everything should be setup right.

not able to use customize airport parking option.. it throws a couatl error.. Traceback (most recent call last): File ".\GSX\editor.py", line 75, in <lambda> File ".\common\criticalsection.py", line 23, in _synchronized File ".\GSX\parkingEditor.py", line 1505, in onSelect AttributeError: 'ParkingEditor' object has no attribute 'assistanceVehicleClasses' {'Airport': 'FIMP', 'User Pos': (-20.433016645452852, 57.679598410004814, 58.5187 m, 2.74065 m, 242.6458830021892)} happens at all airports.. (payware and default).. this feature used to work flawlessly before.. something got corrupted when i was trying to add SODE jetways to FT …

I've used Google to search for this but can't find anything that answers my question. I just added the QW 787 to my hanger. Using the default QW livery. There is no passenger cabin interior; only a flight deck. No where did I read that's all you get. Is this typical of QW? Do the add-on liveries have interiors? It almost seems as if questions regarding QW passenger cabin interiors have been filtered out of all Google searches.

Looking forward to the feedback. Looks great from what I see in the pictures. I hope performance is good. KMIA airport all buildings objects and ground polygons made from native PBR materials Surroundings of KMIA, and over 200 square kilometers of photo scenery coverage. City buildings, covering Miami Beach from Bay Harbor to Key Biscayne with custom made PBR buildings. SODE animated PBR jetways for the best jetway animation possible. SODE controlled lighting, automatically illuminating when low visibility and rain conditions. SODE controlled rain effects, enabling wet PBR surfaces whenever rain is present. Custom animated airport vehi…

I haven't bothered to look at the documentation to see which product is responsible for it, but in P3Dv5 with the NGXu, I discovered that pressing the backslash (\) key will bring up a flashlight for seeing in the cockpit at night. Pressing a 2nd time gives a red flashlight, and the 3rd time switches it off. Nice!

Seriously what is going on lol This is flying early morning eastbound just leaving the UK. The sun is rising from the west (pic 1) instead of the east. The reflections on water are from the north and the lens flare is from the east???? And the moon is in the east... PMDG777 Envtex ASP3D All latest versions

Does anyone know if the old liveries on fslab's website are compatible with the latest FSLab's A320 P3D v5 update? Or do we need to wait for them to be updated to properly work with the new version?

This is a question, there are times (and now always) when I don't get any sound from my aircraft. I tried a Bluetooth headset the other but it didn't work, now it has to be left loud, without keeping the sound quiet - even if I use an ordinary headset. Is there something wrong with or P3D and an addon? Gaz

Whenever I fly at night I always see this strange cosmic pattern in the sky: https://imgur.com/YUmXOC5 What is it? It doesn't actually exist so why are P3D showing it?

Hi All Does anyone know why this is no longer on sale? Looking for a pay ware/decent freeware add on for Pisa in p3dv4 if anyone has any ideas? m

Hi, I like the default p3d v5 colors (with ea on) and was wondering what you all think of the combo p3dv5+ envtex+envshade (+asca). I already have asca and envshade even if I’m not using them at the moment. Should I get envtex? Would envtex make p3dv5 look more realistic? Thanks

Hello, today I went to start up a flight, was able to load normally but when I got into the sim I noticed that chaseplane was not loading properly so I exited the sim and rebooted. Then, when I restarted P3D, I had an error pop up: "the operating system is not presently configured to run this application". I've never seen this one before. I tried doing a client repair and the error is still happening. I also ran SFC /scannow and no issues were found. Googling the issue mainly gives me results related to Office 365 without any clear solutions. Any ideas? Things seemed to be working fine and I don't know what changed. Thanks, Dave

Hello, I installed Ultimate Traffic Live to have ai traffic in my p3d. The problem is that whenever I launch a flight, the AI traffic is invisible. Only the red label/tag, the cockpit and the beacon and nav lights are visible. No fuselage, engines, landing gear etc. Same happens in Vatsim. There is no visible traffic only red labels etc. I have models matched in vPilot. Still this issue occurs. This is very frustrating. I have been trying to fix this issue for 6 hours straight. I have no clue what is causing this issue. Can somebody please help me out? Thanks in advance.

Guys. I have always used PNG for my screenshots. But in the interest of making my files smaller I have attempted to use JPG from the P3D settings. I'm noticing that when I save a screenshot in JPG I get this distortion thing going on. But it works normal at PNG. Any ideas? https://imgur.com/a/Qmww8QB

Hi! I Use REX weather for p3d. I have noticed that the weather in the game not match whit what the weather menu says in the REX app. It says that there is clear wheather in Copenhagen but when i load the game, there is heavy clouds and thunderstorms. And yes, I've been waiting for some minutes to see if something will happend, but no. Once when I flew from Stockholm to Umeå, the app said it would be thunderstorm and rain in Stockholm and so it was. And in Umeå it would be clear weather and no clouds. During the flight that took about an hour, the weather updated several times. But when I arrive at umeå, there was big hazy clouds on about 2000m height as well a…

Hi guys: I've never had this happen before. I'm running p3dv5 hotfix 2. When I went in to options to change my graphics settings in flight P3D informed me via popup that my scenery library was out of order and would it like me to try to repair it? Foolishly I replied yes. Upon my next flight I noticed I just had stock scenery. Well I guess that just meant I had to reset the Orbx insertion points maybe? No. In fact my whole library folder "G:\Orbx library" with all of my scenery except Vector (installed in the sim) was gone without a trace. Not in the recycle bin, nowhere to be found. So I will be downloading all my Orbx stuff for the next few hours and…

Hello Everyone, I have a problem with the shortcut. I want to change the shortcut for Autopilot ON / OFF, Turn off the alarm when Autopilot is turned off, and Switch Engine 1 and engine 2 (ON / OFF) but I don't know the names of the ones I mentioned above. Maybe anyone can tell me in detail?

Hi guys, I have been using XP11 as my main flight sim platform for many months now, and have had many happy flights on the ToLiss 319 and FJS727. I have also recently started doing a lot of vatsim flights. I recently decided to try a go at P3D because of the way the sim looks and Orbx scenery. I am pretty sure there are quite a bit more study-level airliners for Prepared to. I however don't know what my first airliner is going to be, which is why I came to this forum to ask about it. I generally fly short haul and I'd say I am more of an Airbus person but I am certainly not above flying a Boing (haha). I have taken a look at the FSLabs 320 but the price is just insane, si…

TKPK is not one of the Taxi2Gate airports with fixes for P3D v4/5, however, I remember using it in v3 (and maybe early days in v4) and being pretty happy with the scenery. Since 4.5 HF3, I have been unable to see it correctly. It loads without issue, but there is a conflicting BGL. I have the Orbx bgl turned .off. I have run the vector tool. Are there any other fixes to try? Ta!

Hello Guys, Im having this issue, where everytime I pan my view the textures around the airport looks blurry, as if I have changed the texture resolution which I did not. I`ve tried even with the sliders completely left, but the problem persists. I attach a couple of pictures so you can see the problem: This first picture is how its supposed to look: https://flic.kr/p/2jirWJq And this is after I pan the view: https://flic.kr/p/2jirWF4 Any help would be strongly appreciated! Best Regards!