PMDG 737NGX | 737NGXu

Hi Wonder if someone can shed some light on this, I have just purchased and installed the 737ngx for p3dv4,and installed some liveries,the same way I've done it for all my other pmdg aircraft including the new DC6. However when I start P3dv4 none of the liveries will show up apart from the basic pmdg liveries . I've checked in my aircraft section folder in the pmdg part of P3d and they are all there but will not show in the aircraft selection of P3d when I start the sim. All my other liveries for all my other addon aircraft show up both pmdg and non pmdg so its something specific to the 737 any ideas on how to fix? also uninstalled and re…

Hello. i just installed PMDG 737NGX Base Package for FSX. when i try to register them with the activation code fsx crash with this message "microsoft flight simulator stopped working" and FSX is closed. i uninstall and reinstall PMDG 737NG but the same error ocours. Intel i7 7700K 16gb RAM, nvidia geforce gtx 1070 , Windows 7 home edition 64 bit. any idea? thanks for your time

Every time I load into my PMDG 737 on fsx, it says initial set up or something like that and it turns on the aircraft by itself. I want to start in a cold and dark cockpit but the aircraft turns it self on. Anybody know how to fix this issue??

Cannot find saved flightplan in CDU PMDG 737NG in P3DV4 and in my PC I cannot find flightplan LOWIEGLL001 showed in CDU See screenshot https://henkwijngaards.stackstorage.com/s/FtX25Gcf4OMaHTw please assist

Hello. I have a question about the turning behavior of the 737-800 (i think 900 too, not sure atm). The problem is, basically most of the turns, doesnt matter if i do them manually or by AP, have some wiered feel to it. Ill post a vid further down. Hard to describe, but basically, when manually steering it feels like this: I start the turn, and the plane starts to turn too for some degrees, until its "gets stuck" in straight flight in rollposition for some secs, until it starts to "catch up" on the lost radius from going straight. WHat means it turns in the double rate after that. But also only for some secs, until this repeats. Theres no way to make a fluid tur…

Hello, I have installed the latest version of the NGX yesterday on FSX ( 1.20.8396 for the 800/900 ) & ( 1.10.6461 for the 600/700 Extension ) I wanted to ask about the beacon lights reflection on the engine ( Also available for the 777 both FSX & P3D ), since it's available for P3D V4.. I wonder if it's also available for FSX users ? Thank you very much :)

On the Shoppage PMDG wrote: Will be Prepar3D v4 compatible on 16JUL17. But today is the 17th July...and the 700/600 is not working in P3D V4 https://www.precisionmanuals.com/ProductCart/pc/viewPrd.asp?idproduct=105&idcategory=

Hello, after the update to the new version of the base package PMDG 737-800/900 and installation of ASN for P3D v4 the PMDG will not load after choosing in the aircraft menu. The P3D is doing then a CTD. This problem still exists after a reinstalling the base package. The problem is still there if I start P3D whitout the ASN. Regards Holger Schraepel

Hi, I did a flight with 737 a day ago, In the middle of the flight the dome didn't work for me and still not working. Help? THX!

Good day everyone, I am not sure if this is part of the NGX install or not, but I keep getting a RASSPRO.dll crash, which causes my MCE to crash as well. Can some one advise me if RASSPro is part of the NGX install and if there is any know issues with it. I am running P3D.3.4 in a windows 10 machine. Thank you Rob

Does anybody have the files for this anymore? It's not in the Ops Center anymore. It was my favorite livery to fly. Thanks all. Jon

Hi, I bought the ngx about one month ago and I really love it! Anyway I'm having a problem with the radio altimeter "2500" callout: I have like two different callouts delayed one with the other by some milliseconds. Is it normal? Thank you in advance, Federico

After installing 737 tonight on v4, I went to setup my AC equipment. It looks like the op center for my ac is missing "aircraft specific settings". Anybody else have this or is this a change in v4? It usually sits just between performance settings and livery manager. hmmm.

What am I doing wrong? I am trying to program an arrival into London Stansted airport (EGSS) and these are the charts I am using to get myself safely on the ground. I am using the PMDG 737 NGX, I highly doubt its cause of the plane itself. So, in the fmc I set it up as ILS 22 - ABBOT 1C ARRIVAL VIA ABBOT as shown on the image. After I exec it gives me a very weird planning into the ND which looks like this, Until ABBOT its right, everything is normal, the hold is correct etc. However, after ABBOT it makes me go to BKY VOR and makes me turn to CI22 after 17 NM away from BKY as shown on the ND It looks different to the chart I don't know …

So, when loading one of the presaved tutorial flights i.e 'Before Takeoff' or 'Before Top of Decent', for the EHAM-LOWI tutorial, the FMC does not allow any editing. I can copy entries into the scratchpad, I can see all the different pages on the FMC, I just can't actually edit anything. Any ideas?

Moorning All, I was wondering if there is any other failures available to the 737NG P3D v4 like Flaps asymmetry or disagree , airspeed unreliable etc etc.. Thank you

Hi all, Just as the title states with the compatibility changes to the 777 and 737 NGX for P3D v4 are the Immersion software redundant because the changes PMDG made or is it still ok to add that to my PMDG Aircraft? Oh and thanks for the upgrade to P3D v4 PMDG great stuff top notch!! Thomas E. Dennis

Hi fellow Pilots I am hoping someone can help me with this one? I recently switched from FSX SE to P3D V4 so have had a complete clean install of P3D v4 after completely deleting FSX SE so started with a clean slate. I Have installed the 777 and the 777-300 expansion pack with no problem and I am able to download and install liveries also with no problem. However when I installed the NGX I only had the base pack and expansion pack showing in the drop down menu of the OC, nothing in between Tried re installing the NGX to no avail and get the same result. Am I missing something here?

Hello, any knowledge according an issue with 737? First time happens. Loading a new scenarios changing aircraft while loading, the simulator p3d4 shuts down with no warning! Please advise

So either im stupid or IDK because i cant figure out where the F to get skins for my aircraft.......like delta...alaska....united im so lost. i did the digital download of the ngx reboot like 5 days ago so im very new to all this thanks, jordan

How do you set the radio from 5 digits to 6 digits. 137.37 to 137.375. William Taylor

I currently use FSX SE with the 737 NGX. I have a home built cockpit and I have the ND and PFD on a separate monitor in full screen mode (This is achievable in FSX SE by entering windowed mode, undocking them, moving them to the separate monitor and then saving. Then when you return to Full Screen mode they appear where use placed them with no border - great!) I really want to move to P3D V4 but I need to know if this can still be done in P3D or is it even easier in that you can just undock and move them in Full screen mode? Also, I have a VRInsight Overhead Pro Panel and I can't find anything to suggest whether this will work in P3D V4 (I …

Hello. Aircraft voice from cockpit in 737 are different in Prepar 3 d .v4 compared with 737 in Prepar 3d v.3.4. It is ok? Kjelle

Hello, I am trying to get the updated version of the NGX onto my flight sim steam edition. I downloaded the new NGX 800/900 installer and everything went fine. Installed and works in FSX:SE correctly. When I go to install the 600/700 the screen where it is supposed to have the option of which simulator to install to there is nothing and when I click next I get an error: https://photos.app.goo.gl/knHOBlssddHPnqIb2 Also, the weird thing is the title of the error box is the PMDG 777-300ER expansion. Any help would be appreciated. Thanks, Scott Erb

I didnt have this issue with the NGX in P3dV3 but have it in V4. On final just about the time I hear 50ft the AP disconnects and I have to manually land it. I did not have this issue with PMDG NGX in V3. Am I doing something wrong, is there a setting in the FMC I should change. How can I do a CatIIIC if my AP disco's Thank Randy Smith