PMDG 737NGX | 737NGXu

The landing gear wont retract after takeoff...and the left PFD is frozen...it does this every flight...any ideas?

I have downloaded from my PMDG account the latest installer for the NGX for P3Dv3. Unfortunately it will not install in P3DV3 3.2.3.16769. This is on a clean install of Win7 with the previous NGX uninstalled via the control panel and also via the NGX installer. Glyn Jones

Can someone point me to where I can find good free United, Delta, and Southwest liveries for the PMDG 737-600? I see a lot for the other models but can't find a good selection for the 600 Thanks in advance Joe

Hi When i use the aircraft view menu, I have various options for different wingviews. When I zoom out as the view is too close up, eventually I end up in some sort of virtual cabin. Can this cabin be removed so you can zoom out and get a decent view of the wing? I have attached some images. You can only zoom out so far without the runway and scenery looking very strange. http://imgur.com/ZhjotCv http://imgur.com/ZcsliW5 http://imgur.com/ZcsliW5 Also the sound for this view appears to be external sounds. Can this be corrected? Jordan

Someone else who has experienced framerate drop with the 737 after the new update came yesterday? I just finished a trip. I got a fps drop from stable 30 to 19-20 fps on the ground. In the air I got between 23-25 fps. Before the update I had stable 30.

On the PMDG website it says the expansion pack for the 600-700 is compatible with P3Dv3 and v4 but when I downloaded it and installed it, it put it into my P3Dv3 install even though I didn't have the PMDG 737 NGX base pack installed in v3 I only installed it recently in v4. So my question is how should I proceed now to get it properly installed into my v4 where the 737 base pack is installed? Thanks in advance Joe

Does anyone know if alt tabbing while in flight messes things up? Twice now the ngx departed completely from lateral and vertical path with ap engaged. The only thing i did was alt tab. Also i fly with lekseecon live traffic and sometimes get quite a bit resolution adviseries. Could this be the cause? Regards, Roland roelofs

was flying today LOWI-EGLL and every time I try rearranging flight legs in MCDU (when trying to insert/change way point) P3D V4 crashes with following event report; Faulting application name: Prepar3D.exe, version: 4.0.28.21686, time stamp: 0x594a7255 Faulting module name: ucrtbase.dll, version: 10.0.15063.413, time stamp: 0x5ba8b66e Exception code: 0xc0000409 Fault offset: 0x0000000000072208 Faulting process id: 0x226c Faulting application start time: 0x01d308e85f37763c Faulting application path: F:\Lockheed Martin\Prepar3D v4\Prepar3D.exe Faulting module path: C:\Windows\System32\ucrtbase.dll Report Id: 0db2410b-681d-45dd-a3b8-a8baf124f92e Faultin…

Nothing displayed in hud display any others with simular problem ?

Hi, since the instaling the new Major-Update PMDG737, i cannot backlight and Dimming at the CPFlight MCP737 Pro USB-Version with the MainPanel-knop turn on with the mouse. Thanks Peter

I don't know if this is the correct forum to place this in but here goes. I didn't want to drop 50 EU on PFPX so I took the time to observe fuel burn rates for the PMDG 737-800 NGX on a couple of cross country flights from KLAX to KATL (I also used SimBrief and found their fuel calculations to be off). How you use it is first make sure your PERF INIT Cost Index is set to 30. Next, take the length of your trip and divide it by ground speed for the altitude you will be flying to get the number of hours for the trip. Next, multiply the number of hours by the fuel burn rate for that altitude. This should give you the total amount of fuel needed to make the fligh…

I flew the first leg uneventfully using FS2Crew. B737-700WL. Pushed back and started engines for the second leg. Once I applied power to taxi, the ground speed on the ND started climbing, but the aircraft wasn't actually moving visually in sim, both internally in the VC or externally. I saved the flight, and shut down the sim, but the sim crashed upon closing and I got this message. Problem signature: Problem Event Name: BEX64 Application Name: Prepar3D.exe Application Version: 4.0.28.21686 Application Timestamp: 594a7255 Fault Module Name: FS2CrewNGXRB.gau_unloaded Fault Module Version: 0.0.0.0 Fault Module Ti…

Hi all, I'm using the CPFlight MCP pro (USB version) successful with the FSX version of the 737NGX. Are there any users of this MCP panel with a successful working in the 737NGX Prepard3/4 version. A new panel is no option due the price Regards Jo v Bra

Hello, Just curious if anyone has experienced any noticeable improvements in P3D V4 with NGX. If so, what have you seen? Thanks, Dana Rice

All I want to say is this - LM will have to rework/reprogram this whole Dynamic Lights system of theirs. On my very decent system with GTX 1070 the FPS plummet down a mine shaft when you switch them on. During the day my FPS is locked at 30 and it remains on 29+ all the way with 2xSSAA and 'Use High Res' on and most sliders full or 75% ... BUT at night the FPS dies a brutal death! Even with MSAA and High Res OFF it hovers below 20 FPS. When you switch the DL off it's back to normal but then you loose landing/taxi lights and all other effects that begs the question: if DL is suppose to have its effect at night then why be the killer? This is NOT the PMDG 738 but the …

So in the operations center in the 737 tab I go into versions and the 600/700 is grayed it says unable to determine the most recent version and the plane works fine but with the ptp files I have a pack but then the aircraft name is red I select one and I hit ok and nothing happens Thanks for the help

10 seconds or so into launching the NGX its functions freeze. Controls are stuck, switches move but do nothing, and P3D is still functioning. I can look around the flight deck, flip switched and push buttons but no function. If i change scenarios to a different aircraft in the P3D menu everything is fine. I have uninstalled and reinstalled the NGX twice. Have no anti-virus running, have reinstalled the P3D client, and submitted a support ticket. Anyone else have this problem or any ideas?

I enjoyed reading this. Thanks.

The 737 Base P3D installer and OP shows 1.20.8413, but the txt in Zip and PMDG 737 NGX folder shows 1.20.8414, which is right? Klins Li

When I put my mouse cursor over the FMC i get a second small mouse cursor to the right. I have uninstalled and reinstalled and its still happens. This only happens with 737. Help.

Hi all I've purchased the NGX today but the link PMDG have sent me to download the installer just takes me to a "page not found HTTP 404" error I've disabled AV and antimalware apps and tries several different browsers to no avail. Anyone any ideas? Thanks

Hello , i just bought 737 but after entering the activation code i get message error. Unable to connect to activation server.

Any one having a problem with the ZOOMED LEFT OUTER DU with the Prepar3D v4. I cannot get it to pop up. All the other popups work. Was working before today after I installed the new installer today. Adam Poincon

Hi guys, does someone know, how much fuel the 737-700WL can carry? When possible in tons. Thanks.

hello this evening i installed the two last files available for these planes, in the log i read something about the brake maybe i have not understand because i thought the problem about temperature stay to 0 degre was clear, but just finish a flight, landed with autobrake 2 at nice airport,and 0 degre So i don t think it is normal, if someone can say something about that thanks