PMDG 737NGX | 737NGXu

I just bought Active sky for P3dV4 and am wanting to use it with PMDG 737 NGX which i just bought. AS appears to be running but now weather radar. Any ideas on what I am doing wrong? Thanks

Hi So I flew a flight today and noticed the inside of my engine looking like this. I'm pretty sure after using the PMDG 737 for a month it hasn't looked like this until now... Is there a way to get this back to the way it was? Thanks Ian Livesey

Just loaded PMDG 737 NGX into Prepar3DV4. All working great except unable to update to the latest Airac cycle. Yes I purchased it and loaded from the Navigraph page multiple times. No luck, shows cycle 1104, SB 1708. Not sure this is the correct place to post, but will start here first. Darrel Zuke

Could someone tell me what the version number is for the latest upgrade from PMDG for the 737 NGX Bob palmer

Hi. I was just trying to add a livery for my NGX. It was a Livery Pack. The issue here was that when I try to install it, it says "This file contains multiple liveries. Please select from the list below on which liveries you would like to install." I can't multiselect the liveries I want. Any way to fix this? Many thanks, Kevin Maney

Hi, In the real B738, I know that many sounds such as navigation aids, TCAS warnings, GWPS warnings & call outs are audible through the pilot headsets and/or the speaker of the aircraft. Is there any way of getting those warnings and callouts through the headset, whilst keeping all other sounds such as engines etc, on the main speakers? I don't mind getting hold of additional software or hardware to achieve this if I need to, I just don't know where to start. I have found ProSim737 and SimAvionics which will do the job, but I do not want to move away from PMDG as I am not ready to dive in to building a flight deck! Any help would be greatly appreciated.…

I know this is not a PMDG issue but was wondering if there are ways to adjust the ground friction for the PMDG 737ngx (P3Dv4)???? Previously I used frictionality when I was using P3Dv3 and it worked great, however its not compatible now with P3Dv4. I have also read about the dynamic lua script for FSUIPC, however after reading other posts on this forum it appears that isn't compatible with P3Dv4 either. I don't know if it's just me but it is incredibly easy to stop the 737ngx in dry conditions, whether fully loaded or not. It appears as though I only need about 1000ft of runway to completely stop a fully loaded 737ngx. My most recent flight in dry conditions I h…

Hi there After the newest update, there seems to be a small glitch in the VFE speeds on the speed tape? (737-600 haven't tried it on the other models) for flaps 15-40? Rgs Jean Rasmussen

Hi everyone Just wondering if anyone can help me. I have recently downloaded the 600/700 expansion, I used it in FSX and found it to be a great addition. In P3DV4 I seem to be missing the 700WL version. I only have the 600 and non winglet 700. I hope someone can help. Thanks

Does anyone know of a livery in the AVSIM library that would work on the PMDG 737NGX 600/700/800/900 - something that looks like it's been through the wringer and back. Used hard and put away wet. Practically abused. I'll probably take some heat for this, but I need something beat up looking to complement my pristine fleet. Mark Trainer

So when i first installed the aircraft it worked perfect, now when ever i click the hud for landing its just that green glass with nothing displayed. anyone else have this issue? anyone know how to fix it?

I lost the operation center .exe file and have been unable to run it. I have the OPS center updater but when running this it seems to lock up and will not go further. I have tried to download the 800NGX again and on that run both modify and repair without any help. What do I do wrong? HenningR

Hi PMDG friends, I have a random question, and I'm not sure if I should write up a ticket or just toss it in here. I'm playing around with PTA and shaders in v4 (I don't like a lot of the presets out there at the moment), and I noticed that the color I see when I look through the lens in the NGX HUD is pretty close to where I'd like my scene to be as well. It add just enough tint that I really like, but I can't seem to get close to duplicating it. Is there any way you can tell me what the color is without giving away any super-duper trade secrets? You can PM me if that's a better option for you guys. I think once I know what the color numbers are, I can extrapo…

I just purchased 737 NGX base package for P3DV3 and V4 from the PMDG site but at launch he asks to make an update of my simulator. I have P3DV3.1.2. Because? What can I do?

I have two questions... What are the recommended settings for yoke and rudder pedal sensitivity and null zones? Also, I have a Thrustmaster Hotas throttle and was wondering how I am able to set up reverse thrust on the throttle instead of having to press F1 and F2. I have FSUIPC and got it working in V3 with the FSLabs 320 with the steps below. However, these steps don't seem to work with the NGX. Any thoughts? just follow the documented steps. btw step 3 means (you open the backside detend of your throttles, pull up the left lever and shift it back) That triggers the button which will be mapped to F2 (decrease quickly) and F1 (cutoff) https://fo…

Hi, I think the aircraft performance text is actually the -800 ? Thanks Michael Moe

Hi, I've just installed NGX for P3Dv4. When I turn on landing/taxi lights (at night) they are not illuminating ground even with " Landing-lights illuminate ground" option enabled. I have to turn on "Dynamic lighting" to see landing/taxi lights illuminating ground (in external view and from VC). Is it correct? I've read "Dynamic lighting" should be turned off because of high performance drop (I also have framerate drop by 50% at default airport). But taxiing without lights illuminating ground can be "unhandy". Cheers!

Just did my very first flight with the very latest version of the PMDG 737-700 from UK2000's Prestwick(updated for P3Dv4), using PFPX, when I had a CTD as soon as I reached 5000AGL. EventVwr pointed to PFPX.exe. Has anyone else experienced this as well?

Hi all, I'm using the PFC throttle set with a 737 config. 2 power levers. 2 reverser levers and flap/speedbrake levers. I use also a registered version of FSUIPC but it is not possible to get the reversers out the reverser idle mode. So power levers at idle, reverser levers to the reverser max position and at about 60 knots reverser levers back to the "zero" position so you can move the throttles again. This is how it should be. With FSUIPC it is not possible to get it working. Some times it is working as you want but most of the time it is a disaster. So i go back to the Prepar3d V4 standard contol axis assigment, calibrate all axis so i've got the reverser l…

I noticed in the NGX on P3Dv4 that "no matter what" I do, I can't seem to be able to save the empty load as the default payload for the aircraft. I tried "Set Empty", and setting 0 to all load stations, both followed by saving the panel state, and using that as a default startup. Aircraft always seems to load with some non-zero default. Is this expected behavior?

Today I did 2 flights on Vatsim from ENGM to ENTC, both times with freeze . First time at clicking on ND, second time, simply without doing anything, after 1:21h of flight. I have the latest updates installed. A screen of the second flight. P3D closed afterwards by itself. I am using win 10 pro, i7-4790K and Nvidia GTX 1080TI, latest Nvidia Driver. http://i.imgur.com/EOk3DCN.jpg With the previous version (before the latest update), 737-800, I had no issues...on longer flights. From event viewer: Application: Prepar3D.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Excep…

Hello, there I have a problem. Every time I want to fly the PMDG 737, my graphics card crashes after about 10-30 minutes and gives me the following error: "DXGI_ERROR_DEVICE_HUNG". (I have a GTX 760) The strange part about it is, that the crashes started about a mont ago. Before then, the 737 was working perfectly fine with my gpu. I hope, someone can help me.

Hi guys, I've recently ran into an issue with the NGX FMS regarding a "Program Pin Error." I would enter all data into the FMC and when I try go to the takeoff page i get this error. I also have this issue where my CG is really high and I'm getting invalid entry when entering the GW. This always worked in the V3 version as I always took these steps and it's not now? Any help appreciated. Greg Clifford

Hello, I am just trying to keep this post rather short. I have worked on a few liveries and updates to older repaints which I have never released to AVSIM yet and I hardly find the time to do so resp. for me Dropbox is a rather easier way to manage these files. Under the following links you will find several repaints for the PMDG 737NGX which I have updated or not released yet. I thought it would be a shame to keep the intensive work just for me. General repaints for the PMDG 737NGX: https://www.dropbox.com/sh/ppigbvua6ssbfn9/d2Qa835j26 Norwegian Air Shuttle repaints: https://www.dropbox.com/sh/c77oj9jl97rthqc/SfbcQZ-A1- Contains all Norwegian …

Is the latest NGX update 1.20.8413 for P3dv3 compatible with P3Dv 3.2 ? glyn jones