PMDG 737NGX | 737NGXu

I HAVE Windows 10 and upgraded Microsoft FSX to Steam Edition and trying to reinstall 737NGX and 777 but I've got this message " Unable to locate FSX.EXE". I have searched and found a video that shows how to change or create a Exe Path in the REGEDT32 . also I installed FSX SE in a exterior HD and nothing works, so I installed back to C: Programs files (x86) but still the same message appears over and over. Please Help!

Found this guy's(a RW 737-800 pilot) videos on YouTube. They're the best I've seen so far. Learned so much from him. Take a look....

moin I have a big problem with the PMDG 737 I have everything installed but if I remove the image remains black he loads the marschiene simply not what can be that can help me please PS I have only since one day the game and the march LG bigben897

I have just moved over to P3D. finding it very good and have rebought 737NGX for P3d 4.0 where I had it before for FSX Very strange - consistently (well twice in a row!). I have had strange errors on flying the tutorial flight. As I ascend past 10000 feet I get alarms and A/C errors even though I have set the A/c heights correctly in the overhead panel- what I see in the overhead panel is when the error occures all dashes in the height control displays so I can't change them in any way - however it then goes away as an error - and all is fine (though still dashes but no more alarms). Then just before the amsterdam coast as I start descent the plane goes heads …

Hello, I have just bought PMDG 737NGS and installed. It seemed without troubles but no windows appeared to put in the licence key number as declared at manual. When I go FSX SE and chose a new aircrat the following error message appears: Initialization of licence library failed I execuded my antivir as proposed but no positive respond. Can you help me Dezi Pusztay

Hi, I purchased the PMDG 737NG back in July of 2015, my account info says it is only good for FSX, my question is can I use this aircaft for FSX:SE as well? Thanks, Nes

Hey guys. I know there were some previous issues with recent updates to the NGX for P3dv4. Is the update v1.20.8443 reporting STABLE? I have been reluctant to install. And please don't get carried away with replies with needless jargon. Thanks for some feed back!

Is there a way to add aux fuel tanks to the 737 that I'm not aware of? I'm trying to fly from SFO to Heathrow in a BBJ 737 (repaint of course) and am running into a fuel limitation. Is this planned to be implemented in the future or am I missing something?

Hello all... I am able to upload a flight plan into the NGX via Simbrief without issue. However, I am having trouble with uploading the wind uplink from Simbrief. I am using P3Dv4. Can anyone point me in the right direction and explain how and when it should be useful? Thank you. Brad Zimmer

Is it possible for the FMS to reach a specific alitude (example: FL200) a specific distance (50 miles) prior to or after a specific VOR/Waypoint at a specific speed? For example 50 miles Northwest of FLG VOR descend to and maintain FL330

Hello, I was wondering how to configure the FMS, and if it was possible, for a touch-a-go configuration. When I load a flightplan in my FMS, each time the 737 passes a fix it is deleted from the Legs Page and on the Navigation Display, so that only the points that the plane hasn't passed yet are remaining. My problem is that when I perform touch-and-goes and that I have put my airport and runway indication on the Navigation Display, after the first landing everything is deleted on the ND, consequently it is all clean during my second circuit pattern.In this video, we can clearly see that those indications stay on the Navigation Display during the whole procedure : How…

Hi guys Purchased 737 pmdg fscrew bundle pack a while ago keep getting message I need to Download and update with SP 1C Unable to find this SP on this site or AVSIM Need help please Lindsay Cox

Hi there! Recently, I bought the DC-6 for P3D, and since this addon doesn´t work in P3D v3.3, I updated the "client" and "content" to the latest version v.3.4. Everything works fine, but for some reason, the popout 2D panel of the Captain´s PFD in the NGX doesn´t work anymore. All other DUs appear in 2D by hovering the mouse above the panel, until the magnifying glass shows up, and then clicking them, but that just doesn´t happen on the outboard DU. What could cause this little issue? Thanks a lot in advance!

After a couple years of flawless ops, I now get the "x" on both ADI's and the red stripe on both VVI's on entering cockpit. These stay throughout flight but the instruments work nominally. Can't understand what caused the abberation. Gary Adkisson

Okah so I see streamers and youtubers with the blacker yokes and I was wondering how do they do that? Thanks

I recently moved to P3dv4 and this happens only on a previously saved flight, not on a fresh new one (note: was never a problem with a user saved flight on P3dV3). It seems like the fuel amounts are off. I cannot put more than 9K pounds of fuel and and the % are also off. I hope you can see the figures. https://photos.app.goo.gl/lu7B8WrtN2rDCJKn2 https://photos.app.goo.gl/xNkcu0O0xpVSYUSz1 If this is unclear please let me know Thank you

Hello, I have one question regarding the nose gear door markings. I'm not able to find the layer where I can change the registration of the aircraft. Do I need to type it out myself with my own font? How do I know that I use the correct font? Thanks in advance! Andreas

Ok, this is a new one on me. I have been using PMDG's aircraft for years and have never had this happen. I just installed the 737 base package into FSX and FSX:SE. I also have P3Dv3/v4 installed. Now imagine my surprise when I load up the 737, get her activated and then.................................. Anyone have any idea what happened? Should I uninstall her then re-install? Or should I go for the only VA with a true stealth plane? The cockpit has no issues. I tried a search to see if someone else had this issue, but either I couldn't find it or put in wrong search parameters. As for my hardware, it's more than capable i7-7700K, 64GB DDR4, 2-GTX 1080 Ti (SLI)…

Anyone know why whenever I load the PMDG 737ngx the AI comes out invisible and the airports have no markings on the runway? Help would be greatly appreciated

Hello, When I load the NGX I click on the HUD and it gracefully drops down but there's no HUD in the plastic/glass pane like there normally is. I have checked the dll xml file and the PMDGHud dll is there with the right path. I reinstalled it and it still does not work. My dumb brain also tried installing pmdg 747-4 on P3D (which is where i have the NGX installed) and it didn't work giving me some dll error so not sure if that effected anything but I also uninstalled the 747 and reinstalled the 737 and same problem, no lights being projected on the the drop down HUD in the NGX. any help would be great, thanks. Rad1x

Enjoying the B737 for P3D v4. With Chaseplane installed and looking left and right assigned to the #s 4 and 6 respectively on the keypad, when I look past 90 degrees left or right, the autopilot fails and the plane rolls in the direction of the keypad number. The roll will increase or decrease somewhat after that depending on how I continue to use #s 4 and 6. Short term solution - DON'T do that (ok). Long term, does anyone know if there is a keypad # command associated with 4 or 6 with this aircraft? I didn't see any mapping to the basic P3D v4 that would do this (though ctrl + 4 and ctrl +6 = aileron trim which may be the problem but I'm not pressing "control") . N…

Hi, i.ve a home made MCP with arduino. It works by a c++ program realized with visual studio. I use it with PMDG and default airplanes. With p3dV3 it's all right. In p3dV4 default airplanes work but PMDG don't work. I've wrote "[SDK] EnableDataBroadcast=1" in options.ini. Have you an idea ? Thanks Davide

Hi does anyone know what causes this weird black object cutting the cockpit in half as well as the gray round one on the seat https://photos.google.com/photo/AF1QipMenlF4qrlVf19_MvEUKgLGXuHwpiZEXkf8w7wC I do realize this may not be a PMDG issue but you guys are the only experts i know... thank you

I love flying the LOC DME East Circling RW08 approach with all the fixes programmed in the fmc and the dangerous terrain. Anybody fly any similarly challenging approaches in their NGX lately??? I like when there are numerous speed and altitude restrictions on my arrival routes. Please share your favorites!

Hi I have downloaded Pmdg 737-800 ngx for Prepare3D V4 a few times now hoping by re-installing would fix my problem. But still can’t get the “Captains Primary Flight Display “to work on the left/right click spot. Works just fine on the Copilots Primary flight display. Has anyone else had this problem? If so how did you fix it? Jack