PMDG 737NGX | 737NGXu

Hello, I have to ask the experts among you ... why is the click of the switch after a long flight (PMDG) (over 2 hours), or switching off the AP (alarm), no longer hear what is going on before the flight was listening. I've always believed that in the 32 bit version, that's a memory bug, but here in the P3D V4.1 ?? What could it be? APU, engines can be heard.

Hi, I have had the NGX for about a year now and so far no major issues. However, today I tried to load up a flight and right after load the aircraft would start to initialize itself but then crash. At ideas? Windows 10, P3DV3.4, PMDG 737 NGX V1.20.8465 Thanks in advance Andrew Palena

hi guys, maybe someone can help me here. Not strictly a PMDG product question but as i said in the past, PMDG is all i fly. Ok the issue is this, i have the latest version of P3Dv4.1 and I would like to engage the reverse thrust with an available lever i have on my yoke which is now doing nothing. Currently I am using the keyboard letter R which works very well but is unrealistic and corresponds to the command "decrease throttle quickly" but I cannot assign this to a lever, i can only do so to a keyboard button. There is also another command which i think wasnt there in the older version (or maybe it was....anyway) that reverses thrust and is called "throttle reverse axis…

Hello there, I've been using the PMDG 737NGX for both FSX:SE and P3Dv4 and, firstly, I want to say thanks for making such a fantastic study-level addon! When I installed the 737NGX in P3D v4, I noticed that all the VC views were zoomed in quite a bit compared to the FSX:SE edition. Doesn't matter if it's the overhead panel, FO seat, wingview, or even spot view. It looks like all of the default zoom values are a bit too high. Should I go through and try to adjust all the zoom values on the config to get it to look the same as the other? I probably would need to provide you with a bit more information, but let me know if need to. Sorry if this question was al…

OK, I'm getting strange behaviors when trying to use the PMDG NGX in Prepar3d V4. Here is what I'm running at the time: Windows 7 Pro 64 bit. P3d V4 64 bit as administrator Chase Plane FSUIPC - latest paid version At first, P3D was telling me that the parking brake was on but, nothing I did would get rid of that status. I tried ctrl + the period, I tried the button on my Siatek throttle quadrant set up to toggle the parking brake, I tried the parking brake at the cockpit throttles... nothing would get rid of the p3d message that the parking brake was on and, the aircraft would not move so, the program was actually leaving the parking brakes on…

Hi guys - She is now available at http://library.avsim.net/download.php?DLID=197146 Enjoy!!

Hi All, I have installed the PMDG 737ngx directly from the website and so do not have the disk version but rather the downloaded one. This being said, i wanted to know if you can download the 737ngx from the download link given in the email as many times as I have to factory reset my laptop and would need to install the 737 back. So i wanted to know if i can just directly install it from the email. Thanks in advance!

Hello. I have some problem to landing with PMDG737NGX. I will explane my situation. 1) I pushed VOR LOC button when empty diamond appeared. 2) I pushed APP button and I checked localizer captured. 3) When glideslope captured, I pushed CMD B. 4) SINGLE CH is not appeard at PFD, but LAND3 appeard when 1,500ft. I enter ILS frequency at NAV1,2 and I active that. What is matter?? help me please

Hello, Before updating my 737NGX version I wanted to note my Aircraft Specific Settings. I went to OPS center and choose the 737 NGX but the dropdowns for Aircraft Specific Settings and Sound Settings have vanished. I do have the performance settings, livery manager, downloader etc and version and documentation. I used to set my aircraft settings before from the OPS center. PMDG OPS center version 1.17.27. No updates available How can I resolve this? Thanks Greg Clark

Ok so I am flying from Detroit to Vancouver and my airspeed indicator is glitched or something it goes from like 160 knots to like 330 knots in about a second and I can’t find anyone else having this problem does anyone know what is happening

I just switched from the FSX version of the PMDG 737 800 to the P3D version. In P3D. I am not able to highlight and move the pilot's MCP to a different location (don't get the + sign when putting the curser on the instrument). The FMC, ND and co-pilot's MCP move ok. Can anyone suggest a fix this. Thanks. Martin Cook

Hello - This is the most minute of minutiae, but the 737NGX is so beautifully modeled that anything I can't duplicate from the FCOM makes me think I'm doing something wrong. So here is my question: According to page 10.21.16 of FCOM2: I can't duplicate this. When I power down the plane and shut down the battery, the clock blanks as expected. But when I power it back up, the clock comes right back in UTC, not in manual, as the manual states. Is the clock not GPS-enabled? Or am I misunderstanding something? Thanks for reading. Marcel Durieux

Hello, I've been experiencing a strange issue with certain SIDs/STARs that I've never seen before. When flying KSMF-KLAX in the 737-700, my route was FTHIL2 FRA REBRG IRNMN1, departing KSMF RWY 16L and flying the RNAVZ 24R approach at KLAX. However, after activating the route and the entering performance values, VNAV data is not computed. Waypoints on the legs page look like "---/------" where a computed speed/altitude value should be. If I try and take off, I get a "VNAV disconnect" error. However, when I switch STARs and load the RDHOT.DIRBY1 arrival, VNAV data is computed as expected. This has happened on a few other SID/STAR combinations but I can't recall any at…

Hi. There is a load issue with manually saved scenario. I have installed only P3D V4.1 on my desk top on windows10. Recenly. I saved one flight which one is top of the descent to Lowi from Lirf by main manu p3d. after few days later I reload succesfully saved flight but only once. After that time I cannot reload The saved flight in Scenario window P3D. When I load The saved flight then panel and fmc is blank. There is a something that I missed? Is there problem non- Engllsih windows? I'v set locale English. Thanks. My addon: PMDG737/777 ORBX FTX GLOBAL /VECTOR / HIFI ASV4 & ASCA EVTEX EZDOK …

After a new download of p3dv4 and placed into C:\Program files directory I am unable to export flightplan to PMDG 737NGX. I have corrected all permissions for the folders except for programFiles that is greyed out. So on the PFPX Flightplan and the export tab: On the Prepar3d folder I have this path:C:\Program Files\Lockheed Martin\Prepar3D v4 On the addons I have;: PMDG Simulations NGX (p3D) "P3D"\PMDG\FLIGHTPLANS\NGX. Everytime I export it comes up with a yellow triangle and text can't write to file C:\ Program Files\lockheed Martin\Prepar3D v4\PMDG\FLIGHTPLANS\NGX\EKCHENGM02.rte What have I done wrong. I was told by Aerosoft to contact you Best r…

I'd like to confirm the correct way to save a flight in P3D V4. I'm having problems with flights previously saved and then reloaded. What I'm doing is: 1. Pause the simulation, making sure that that the aircraft is in a stable condition (e.g., wings level, power steady, etc.), time compression is off, and the simulation is paused. I'm using the standard P3D drop-down menu selection for saving flights. 2. Exit P3D. 3. Return at a later date and start P3D, and then select the saved flight from the scenario screen. I never start a PMDG flight without a clean restart of the sim. The default flight when the scenario screen loads is the default F-22, …

After i put in my route my FMC always says "NO DEST PATH AFTER" "then it says the waypoint" but my route makes since its perfect.

Hi all, I have bought the NGX and have not had the time to play it. i bought the disk version from amazon and i have opened the disk run the set up etc. but its asking for the activaytion key which was in the box which i do not have anymore. Is there anything i can do to fix this? Thanks in advance!

Hello, my question is mainly for the real life airline pilots. I was wondering do you guys have the LOGO and the wing lights on throughout the whole flight during night time and if not what when do switch them off. I am aware it differs from airline to airline because of every airline got a specific SOP they use but it will be amazing to know what you guys do, thank you :) Necmi Osman

I Do Everything to do when starting the engines but engine 2 won't start. All Switches and levers are the same for both engines but engine 2 won't start. Please Help.

When loading to the FSX menu after exiting a flight , it closes (with the 737 NGX)

My operating system is the latest version of win10, P3D is V4.1, PMDG737-800WL has been updated to the latest version, FMC has been set to open 500ft, 400ft, 300ft, The The 50,40,30,20,10ft, when the approach will not be reported when the height.

Hi, I'm using Prepar3D Professional (v3.4.22.19868 Client versión) in Windows 10 (versión 1703, compilation 15063.674) and every time I try to select PMDG 737NGX it produces a crash to desktop. I have have no idea about what to do because it worked OK a few days ago. Thanks in advance for your help. Best regards, Jose

I have a problem at takeoff... when I set parking break and I made 40%N1. And I push TOGA button and parking break off. TOGA mode engage but it go to idle thrust soon.

Hi. In the past I bought the PMDG 737NGX Base Package for FSX (1861-37). For P3D v4 is there a free upgrade or do I have to buy a new product? Thank you.