PMDG 737NGX | 737NGXu

When opening operations center, it reports this error. An exception has occured! Please contact PMDG support by submitting a ticket at http://support.precisionmanuals.com for help with resolving this issue. Press "Copy to clipboard" below and then paste the information into your support ticket. Additionally, a log file has been created at: c:\users\admin\appdata\roaming\pmdg\pmdg operations center\PMDG Operations Center.log Please attach this file to better help us fix this issue. The application will now exit. 01/24/18 19:30:21 Exception: Access Violation at 0x69726576 00A90000 C:\Program Files (x86)\PMDG Operations Center\PMDG Operati…

Whenever I fly the PMDG B737NGX in my homecockpit, I use both NAVIGRAPH and FSiPanel. These 2 add-ons make my flying experience so much fun and real. With Navigraph I have full access to all the worlds Airport charts with a few mouse clicks. With FSiPanel I can set up any STAR and fly it down to the runway and practice landings in all kinds of weather. The combination of PMDG B737NGX HomeCockpit , Navigraph and FSiPanel have made my dream come through.

Forgot how to do this. I am getting too many saved panel states in my Setup for saved states. Can anyone give me the path to delete some?? Thanks

Dear Sim airplanes addict ! Apologies for my approximate English. I have two simple questions. 1) I can't get my V speed on PFD. I did enter the data in the FMC and then execute but I can't get them (tried several time). It's a small detail but kinda annoying. 2) I have a Sim check coming soon and wanted to train the pitch and N1 settings. Unfortunately, after entering the mass in the FMC I thought I would match these settings but i'm far from it. Any suggestions? Mass setting is 60T TOW and value should be for example at fly lvl, V 210 pitch 5 degrees N1 58%. Am I doing something wrong ? Thanks for help. Mat…

After trying my first flight with the PMDG737NGX, I was stopped at the programing the FMC phase on the "Init" Page due to a message saying "Nav Data Out Of Date", after doing a bit of research I realized I need a program called "AIRAC." I'm looking for a free substitution for this, all I want to do is get flying. Thanks for any help you can offer! -Lucas

When I try to install my downloaded PMDG 737NGX file it goes to about 85% complete on the completion bar then gives me a message: Feature : FSX-Steam Edition Component: Saved Flights My Docs SE File: C:\Users\WDDellDesktop\Documents\Flight Simulator X-Steam Edition files\PMD34CE.tmp Error: Access is denied Does anyone have any knowledge on what is required to rectify this situation. I have tried all I can think of or can find on the net. I have sent 3 messages to PMDG over the last 3 weeks with no reply or acknowledgement. Are they still supporting this product? Thanks Wayne Fofonoff

Approx. 10 minutes after start without Problems a beep tone starts. Approx. every half second. Master caution is dark Can you please give me a hint, what the reason could be ? And I don't know how to stop/solve it. Thanks

Something is causing a periodic, repetitive flashing of a ground object (appears to be a ground cart), and the flashing happens about once every second....weird. I've never seen this before and am racking my brain trying to determine what's caused it. I'm running with the sim (P3Dv4) the following add-ons: AS (networked), AivlaSoft EFB, Chaseplane, TIR. Here's a rough video of the issue in the NGX: https://www.dropbox.com/s/tld4a3aszr2h1s2/P3D glitch.avi?dl=0 The odd flashing graphic persists in flight, too...very annoying. I can't track this oddity down and need your collective experience and wisdom. I've tried several solutions, including eliminating addons, f…

Can someone tell me how to navigate to the PMDG 737 panel cfg? I'm not seeing it when I open the folder

My question is simple is there any way to load a flight plan into the FMC of the PMDG 737 NGX? I have seen a way to save them but no way to load them

I fly out KJAX and usually start at Gate A4 but the FMC does not recognize that gate so how do you know what gate you are at? I thought that after selecting your departure airport and you select say gate A4 that you would use that to input into the FMC but the FMC does not recognize it is there a particular way it has to be entered Such as A4 or A 4 or is there a number sequence that is needed

When programming a route in the FMS I often see NDM approaches being listed under Approaches in the Arrivals for an airport. Sometimes also VDM is being listed. I couldn't find an explanation for NDM and VDM on the Internet. Can any of you shed some light on these kind of approaches for me, please? Thanks, Hans van Wijhe

I downloaded the 737 base package on 19 JAN 18 directly from PMDG. Do I need the service pack or was it included with the download? If I need to download it, how do I do so? I

Hello, I've been wondering if there are any plans for PMDG to make the 737 MAX. I know it's hard, but id think it would actually help some of us out (like getting pilot's licence, that kind of stuff) if it is possible. Thanks!

Hi guys. I am building a motorized TQ, I would like to know the offsets to drive two servos that act on the levers of the trottle. Can you help me? Thank you

Hi, P3D shutdown after a few minutes after loading the scenario with the pmdg 737. Can you help me? Below is the error message. Thank you. [error.0] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.1] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.2] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.3] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.4] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.5] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" [error.6] error=Failed to load visual effect "fx_PMDG_NGX_navwhih" …

Bonjour, Voila après plusieurs recherches, rien ne se passe et toujours les même problèmes. C'est pour cela que je me permet de poster ce message. 1. Je suis sur P3D V4, et j'ai installer le 737.800/900 de chez PMDG, mais voila il me demande a chaque chargement la clef d'activation, c'est assez embêtant. 2. une fois le 737 charger, toute les commandes vont correctement fonctionner durant les 30 premières secondes, puis la la manette des gaz ne répond plus ainsi que la direction même avec la souris. Je suis avec un Thrusmaster HOTAS T1600M, celui-ci fonctionne très bien avec les avion de base du jeu. J'ai Egalement installer tous les simconnect, …

In the PMDG 737 NGX, is it possible to synchronise the captain and FO's course selector, so they both inc/DEC together?. The reason I ask is I have a Saitek multi panel, which allows me to set the captain side course setting, then to change FO's for ILS landing etc, I have to use the mouse to change the course in FO side to match the captains. Which is a pain, if FO synchronises to captains, it will be easy, I can use only the panel. Thanks

Hello When I steer the 737 should I use my rudder pedals to turn the aircraft on the ground or do I have to set up nose wheel steering using a Tiller setting within FSUIPC Clive Alexander

Is there a way to assign the vc overhead panel to a joystick button ?. Or invoke it via a key combination ?. Thanks

I have just installed an FSC TQ semi pro with no motors. It all works nicely but for the first time I cannot get enough reverse thrust. The maximum digital value that the the TQ gives out for the reversers is -4096. This produces a PMDG 738NGX reverse thrust N1 of about 62/63%. The real aircraft gets at least 82% N1 and there are various reports of sometimes more with other aircraft of the range. Countless videos show the same being achieved in the PMDG 738. My previous means of getting reverse were 'F2' and a built-in switch operated by a Saitek throttle quadrant at the idle end of the throttle arc (an extra little pull) and bingo lots of reverse thrust. A te…

JUST PURCHASED 600/700 EXPANSION AND THE SITE GLITCH OUT AND I DID NOT GET A DOWNLOAD LINK BUT YOU CHARGED ME FOR IT!!!!

Hello, When I open Operations Center it tells me that a new update for NGX is available. Option is Install update, but it also says download update for me to install under more info. This seems contradictory. When I press install update, I cannot find that it has downloaded to the downloads folder on Win 10. The first time I chose "install update" a DOS window flashed open. Not sure what happened there. But every time I open Operations Center it still says that I have a new update for NGX. I am confused about how to install this. Greg Clark

Hi all can anyone help me i have 737NGX v1.20.8413 i would like to update to 737NGX 1.20.8465 the OC says there is a update via the OC notification page but the notification page says you have no notifications is there a service that needs to be running in services.msc as i have turned off a few services in services.msc

I have a Saitek yoke and quadrant with one single throttle. With the single throttle..i can only use reverser on one side. Is there a way to do both reversers? PMDG 737ngx. If not do I need to use another axis assignment as oppose to button for throttle. Seems like on lever the axis is reverse for thrusters. Make sense? lol Thanks, Bob M.