PMDG 737NGX | 737NGXu

When's the operation center coming out for the 737?

I am considering buying this plane but only have a Saitek Yoke and no rudder pedals? Will this aircraft work with FSX auto rudder enabled please

can anyone tell me where u increase volume on radios.Also where r the switches 4 radios. thanx n advance.

http://online.wsj.com/article/SB10001424053111903461304576524450078757050.html?mod=googlenews_wsj Any-way to make a repaint? I KNOW THAT IT IS FICTIONAL (for now) BUT, since you made the Southwest -800 repaint could you possibly do this one?

Hi guys! I'm having trim problems when using the 737-700 variation ONLY! After setting the FMC before departure and trimming the aircraft correctly according FMC numbers, the aircraft is unable to maintain pitch after departure so what i have to do is trimming again before engaging the autopilot. When I check the green trim zone on the pedestal, the white mark is just on the low limit of the green area. Do you have any idea? It only happens with the 700 & 700W variant. Thanks! Santiago

https://hub.united.com/en-us/news/company-operations/pages/new-split-scimitar-winglets-take-flight-on-united-737800.aspx Just wondering if PMDG would consider adding these to their collection either as a seperate add on or update, seeing how we have the 737-800, 737-800WL, and MAYBE soon the 737-800SWL (scimitar winglets)? Anyways just a thought that might be worth mentioning. please delete this post, AVSIM double posted on me

The indicator is gone all of the sudden, ASN provides the weather properly, I have no idea what happened all of a sudden, I didn't update anything or made any major changes to the FSX or NGX settings. Any help would be greatly appreciated.

On startup, the view from the pilot's seat is pointing down to low. Any fix for this? Thanks

I cannot understand why I have lost the voice when I selaect pushback. Also there are no sounds when retracting the gear, or selecting spoilers. Anyone providing an answer will be appreciated. Robert

Last week I installed a program called "### AI traffic 4.0" - it provides some high quality AI traffic and covers whole Europe. So far I'm very satisfied with this amazing freeware. However, having done a couple of flights in the NG I noticed that the AI traffic does not show up on the ND of the NGX. Is there any way to make the traffic show up on my ND just like in RL? Any help is appreciated.

Hey there, I'm yet another virtual pilot having a problem with inserting SID's, Stars and waypoints in the FMC. I used FSBuild to create a flightplan from EGLL to EHAM (EGLL..BPK.UR123.CLN..UL620..REDFA..EHAM) and exported it to FSX and the 737NGX. Both the game and the the plane accept the route without any problem (using flight planner in FSX and co route in the FMC), However for the sake of realism I want to insert the route into the FMC myself. Now I hit my problem: When I load the co route in the FMC it gives me the following route: VIA TO DIRECT BPK UR123 CLN UL620 REDFA DIRECT RW36L When I try to copy this result and put i…

HI guys Today I bought my first PMDG plane. A 737-800. I think I have bitten off more than I can chew. Where does a newbie start as it all seem so overwhelming. This world is very different to FSX 737's. Are there tutorials? I have a couple of questions. How do you request take off or advise of landing? When you go to the appropriate frequencies how do you notify? Again Im sorry but I am very new to PMDG but have been an avid FSX flyer for years. Thanks

If this topic has been covered somewhere else, i apologize ahead of time. Im wanting some opinions/solutions/input from the flight sim community on the above topic. Im starting to build a home cockpit. My concept is to use wood to build a cockpit frame (that can be easily disassembled, since i have to move frequently....army life) and slowly begin to build a replica of a 737-800 NGX cockpit. My concept is this: Dell XPS 1640 laptop (8 GB ram, 500GB HDD, ATI Radeon Mobility HD 4650, win7 x64) connect my laptop to a Matrox Triplehead2go DE which is going to be connected to 3 24" inch LED monitors. (larger monitors after i retire from the army) Im using the Vir…

I see united is refitting their 737-800 fleet with the new split scimitar winglets, which will reduce drag and save on fuel. I know this was only recently approved by the FAA, but any chance we will see new 737-800 models in future updates down the line reflecting these changes? Chris

Hi Everyone: I keep getting lost when trying to taxi at airports. The charts help a lot, but I still often get lost. I know that some real 737 NGs have a package installed that is akin to a GPS for the airport environment. I don't believe that is modeled in the NGX package (right?). Is the there an add-on I can get to help me to navigate the taxiways at airports that works like a GPS unit so I can find the runways more easily? Thanks, Chris Catalano

Duplicate post

Hello ! Some of you can post a screenshoot about how to add entries for offsets under FSUIPC ? I tried to set the Auto-brake to a rotary switch using the PDF with offset listing, but doesn't work. Thanks, Ben

Hi there, I recognised on last days that there is no chance to engage AP after t/o from runway in LZIB. Then after climbing "on hand" still no chance to switch AP on. Only think that is working is A/T. But no level change or LNAV or other modes can't be angaged. What can it be? Behaviour of the plane is not so every time. Only occassionaly. I'm using NGX with SP1c + 600/700 pack. Peter

Bonsoir Messieurs Je m'excuse tout d'abord pour l'anglais, en effet je ne sais pas l'écrire donc c'est pour ceci je j'ecris en français.J'ai donc intallé mon PMDG NGX qui était la premiere version datant de oct 2011 et depuis plusieur années je ne m'en suis plus servi et depuis deux semaine j'ai donc voulu le réinstaller et faire par conséquent la mise à jour sur le site de PMDG 1C. Au démarrage de mon PMDG on me demande la clef systematiquement et plusieur fois avant de lancer l'avion d'une part ety d'autre part une fois l'avion au parking j'ai un bandeau initialing qui décompte 18 seconde je crois et la je crois que les moteurs démarre et non pas de moteur en route me…

I've had the NGX for a few years. Wonderful bird. One thing that puzzles me though is an event which happened tonight and has also happened a just a few times in the past. Starting the engines on pushback, #2 fires, #1 looks like it's spooling up but it never finishes. N1 stays at 19.9. N2 58.3. FF .65. Oil Temp -1, VIB 0.0. I can advance the throttle to 53.3 N1 and the right side #2 engine spools up but the left stays static at all of these numbers and is dysfunctional. Screenshot here with throttle at 53.3 N1 - you can see the left side basically not responding: http://boche.net/dropbox/2014-2-20_21-51-23-102.jpg Resetting the aircraft to DEFAULT via the…

Everytime I load the plane and its done configuring I get this annoying sound like the fuel pumps are on for starting a prop plane. I can not turn it off and its only after service pack 1c. Please help me.

Hi Everyone: I just purchased Ground Services X and one of the things I am required to do manually is tell FSX to remove the chocks in the PMDG 737. Is there a command to do this? The reason it is necessary is because GSX will not do a pushback as long as the chocks are in the way. Does anyone know how I can remove the chocks without going through the FS2Crew pushback routine/dialogue? Thank you. Chris Catalano

Hi, I experienced an issue on the menu bar in FSX Basic (SP1 + SP2). After you have installed the PMDG Boeing 737/800 and have upgraded it can not find the menu of the addon and then that of PMDG. Could someone help me solve this problem? Thank you.

Hi guys! I'm having trim problems when using the 737-700 variation ONLY! After setting the FMC before departure and trimming the aircraft correctly according FMC numbers, the aircraft is unable to maintain pitch after departure so what i have to do is trimming again before engaging the autopilot. When I check the green trim zone on the pedestal, the white mark is just on the low limit of the green area. Do you have any idea? It only happens with the 700 & 700W variant. Thanks! Santiago

Hi! Just a quick question, I remember seing somewhere that the NGX was supposed to get a new service pack together with the 777 to take advantage of some new nice features from the 777... Is this still coming ? =)