PMDG General Forum

For those of you who thought I'd stir the pot about PMDG's *supposedly* upcoming DC-6, you were wrong! Rather, through my internet searching I have found a Douglas DC-6 for sale, and it looks quite familiar. Here is the PMDG plane, with both henning van Rensberg in the real thing, and PMDG's paint scheme: Here is the listing at Controller.com (Can't link pictures): http://www.controller.com/listingsdetail/aircraft-for-sale/DOUGLAS-DC-6/1958-DOUGLAS-DC-6/1357265.htm Listed as a 1958 Douglas DC-6B, this plane previously served in Zambia, Yugoslavia, and other places. Currently listed at $1,245,000, some negotiating could bring it down to an affor…

Where do I go to post screen shots. Thanks.

If you want to try out the 777 with its awesome weather radar there is currently two active cyclones ( hurricanes ) in Australia. One is currently sitting over Gove in the Northern Territory YPGV. And the other is over Rockhampton Queensland YBRE. lots of fun Sorry it doubled posted!

1. I have noticed that a lot of people are not signing there full names when posting. I think it because the mobile version of this site does not automatically post them. As I have found out and remined by the forum police. Just keep that in mind when posting people. Craig Tomkins 2. Thank you PMDG - I read the great news of the js41 being transferred to p3d. Clearly, you make the best aircraft on the market and I have never been a disappointed consumer when I have purchased one of your products. But, can I make a plea please; can you listen to the community when you do the transfer (I know you already do). There are some very small defects with the product and …

Hi guys Reviewing my account visa,I saw a double charging of the product 777-200LR / F for P3D, which is what I need to do to fix this???regards. Nicolas A. Brellenthin Betancourt

Captains- This afternoon I have a couple of news items for customers who are using FSX:SE... PMDG 737-8900NGX Base Package and PMDG 737-600/700NGX Expansion: We are **just about** wrapped up with a pretty significant update to the NGX for both FSX and FSX:SE. This is a free update for all registered users, and it will add a huge amount of fixes, updates, optimizations and new features to the entire NGX product line. (Weather radar!) In addition, it will make the NGX compatible with both FSX and FSX:SE using the same technique we used for the 777 product line- in that you will get a new installer that will allow you to install to either FSX, FSX:SE or bo…

When I want to download liveries for the PMDG 777 it comes up 'there was an unknown error downloading these liveries' any help?

Everything seems to be working after loading the 777 base software except all of the info on all of the displays is out of focus and the smaller numbers are completely unreadable. I have set up the sim with all of the recommended settings including those from LM. I have not be able to find an adjustable parameter that changes the focus problem. Has anyone else had this problem? Has anyone fixed this problem? Ron Oines

hello , recently , i was doing a long flight with multiple stops , with my PMDG 747-400X i've landed at my first stop and take off again and when i was descending to the next stop , i just looked out the aircraft and FSX has stopped responding with fault name : DSound.dll Afterwards , when i was trying to open my Simulator , a message appear : if i choose yes , a fatal error will appear with fault name : PMDGoptions.dll, if i remove the PMDGoptions.dll from dll.xml , FSX will work fine , but PMDG 747 wont work i've even tried to delete and remake dll.xml , but no succes i hope you can fix my issue , thanks in advance sorry , the post had been doubled !

Hi, after a long absence from FS I've just reinstalled the PMDG 737 and have the following problem with the PFD. It has RED lines crossing it. When Installed the program didn't request my activation key. Is this the problem. Please advise and thank you. Bob

I've read on another forum the v2 of 747 is being developed but assume this isn't serious. Are there anywhere reported the present/future plans?

The PMDG document on the 777 for P3D says to replace the UIAutomationcore.dll for Win 7 64-bit (page 24). The CTD guide (page 7) on AvSim says this fix does not apply to FS9 or P3D. Which is correct? And, I could not find the file using the link in the PMDG documentation. Thanks.

http://www.jetstreamtv.net/klm-777-200-ams-to-jfk/ Enjoy!

Hi ! I`ve try to install liveries for my 737(600-700-800) . I followed the instructons from PMDG but when I came to"Unzip all the livery ptp PMDG Texture pack" I was lost. Hope some one can give me some advise

Hello Three days ago I purchased the 772 and 773. Perfectly P3D v2.4. Now I installed the version 2.5 and T7 do not work. We must do something special or they will get a patch for this new P3D? Thanks for your responses Antonio de Castro

Hi ! I`ve try to install liveries for my 737(600-700-800) . I followed the instructons from PMDG but when I came to"Unzip all the livery ptp PMDG Texture pack" I was lost. Hope some one can give me some advise

Hi, Does anyone know why i cannot activate my product (JS41)? I currently have the following problems and i think they are connected: 1. no activation screen 2. All MFD blank 3. Cannot move throttle levels 4. Payload sheet is black

Hi PMDG, I know you have been very clear about your new pricing for P3d. However, i am some what confused by the $87 price tag for the new 777. I was under the impression that pricing for P3d products would be at a commercail level (in the thoundands) and i have noticed it is the same price as the FSX version. I am waiting for the JS41 to be released and i am happy to repay for the product as a similar price. Is this what we can expect?

Tried to launch the NGX today and was asked for activation, not sure why, I've made no updates and has been fine since installation. Seems the same happens when selecting the 777. Cant use any PMDG products until I activate but when I enter the serial to do so an error occurs ... any ideas ? A few screenies :

What are the IMMEDIATE benefits of P3D, all I read Is incompatibilitys and poor performance, all for the sake of a few shadows? Such a huge percentage of posts regarding toil and struggle, please enlighten me ?

Everything seems to be working after loading the 777 base software except all of the info on all of the displays is out of focus and the smaller numbers are completely unreadable. I have set up the sim with all of the recommended settings including those from LM. I have not be able to find an adjustable parameter that changes the focus problem. Has anyone else had this problem? Has anyone fixed this problem? Ron Oines

hello , recently , i was doing a long flight with multiple stops , with my PMDG 747-400X i've landed at my first stop and take off again and when i was descending to the next stop , i just looked out the aircraft and FSX has stopped responding with fault name : DSound.dll Afterwards , when i was trying to open my Simulator , a message appear : if i choose yes , a fatal error will appear with fault name : PMDGoptions.dll, if i remove the PMDGoptions.dll from dll.xml , FSX will work fine , but PMDG 747 wont work i've even tried to delete and remake dll.xml , but no succes i hope you can fix my issue , thanks in advance

Sorry I put it twice Antonio de Castro

Everything seems to be working after loading the 777 base software except all of the info on all of the displays is out of focus and the smaller numbers are completely unreadable. I have set up the sim with all of the recommended settings including those from LM. I have not be able to find an adjustable parameter that changes the focus problem. Has anyone else had this problem? Has anyone fixed this problem? Ron Oines

Everything seems to be working after loading the 777 base software except all of the info on all of the displays is out of focus and the smaller numbers are completely unreadable. I have set up the sim with all of the recommended settings including those from LM. I have not be able to find an adjustable parameter that changes the focus problem. Has anyone else had this problem? Has anyone fixed this problem? Ron Oines