The FS2004 (FS9) Forum
20979 topics in this forum
-
To save me having to try approaches with each aircraft in the program can anyone tell me which FS9 aircraft are "approach" capable? ie are there any others besides the Boeing fleet that will shoot a hands off ILS landing up to the point of touchdown?Jeff
-
- 3 replies
- 1.1k views
-
-
Well bad on me for purchasing the Wilco Airbus vol 1 & 2 series. I saw some emails about CTDs but went ahead anyway and purchased them without fully understanding how bad the issue was. Basically, if I attempt to fly these aircraft using the FMGC (like you would normally), there is a very good chance that you will experience a CTD. The reason appears to be a conflict with the navdata information (I have an updated nav database from navdata.at). With vol 1, if you attempt to fill in a flight plan, ther are many that will cause an immediate CTD (some examples include BAR, MOS, AHO, MKG, MTC). I'm not sure what these points have in common, but the result is the same-unfl…
-
- 10 replies
- 3.7k views
-
-
-
Hi Folks:For those of you checking your favorite FS sites for good bargains this time of year; anyone find something a great buy?I am looking at adding a business jet to my fleet in FS9 or perhaps ground environment or perhaps a nice airport scenery from Flytampa or Imaginesim or perhaps...Anyway you get the picture:-) Airbus
-
Just purchased the FSD Seneca and when loading the glass cockpit version, the vc textures do not load and it appears to be the steam gauge version...tried to long onto FSD forum but kept getting an error message...then d/l a new texture set for the Seneca, but when I tried to load that, I get error messages that the folder can't be found...also the load manager does not work...when I click on it, it flashes a window for a microsecond and that's all...hobbies should not involve ripping out one's hair
-
- 1 reply
- 961 views
-
-
I've got a good selection of airliner AI, and I have some nice biz jet AI courtesy of the Ultimate GA packages, but my virtual skies are sorely lacking smaller GA aircraft...Is there a package available of GA type AI aircraft?Cessnas, Pipers, singles, twins, etc. I see there are lots of repaints available in the library here but I am looking for a package that has a selection of aircraft that I can drop straight into my FS folder.Any ideas?Thanks.
-
- 5 replies
- 1.3k views
-
-
Hello;Does anyone have any experience with Co Pilot Pro from Abacus. I cant get the database to complete without getting the Microsoft send dont send error.Bill
-
- 0 replies
- 698 views
-
-
I was just looking at their forums and the list of fixes that they have such as:1) fsX A340-600 no control surface animation *fixed*5) fs9 assymetric thrust during taxi *fixed*I had to laugh and was actually expecting something like 6) Aircraft does not fly *working on it*There is something obviously fishy when you produce addons like these with these bugs.
-
- 4 replies
- 1.1k views
-
-
I posted a question earlier to the forum. Being new here, I did not realize certain queries are not well received. It was an innocent question with no sinister motives. I have a legal, registered FS 2004.Thank You to everyone who replied! As I gain more experience, I hope to contribute back.
-
Hi everyone,just started with FS2004 and i have a problem. I did some flights now and at 4 out of 5 landings there is a AI-plane coming in at the same runway at the same time. I did get permission to land and while monitoring my landing approach i see the ATC giving the same runway free to another plane. Since i have not seen any planes while approaching i switch to external view and there is plane (usually B737) pretty close - less than a mile off - approaching the runway. It is not like I am 10 miles out - but i can see the runway clear and i am on final approach - its just a matter of minutes to touchdown. Usually it ends either in a crash or i have to abort landing an…
-
- 5 replies
- 2k views
-
-
What's the best freeware/payware for enhancing the airport sound environment? I use a combination of Ultimate Traffic and World of AI but the sound of aircraft taxing close by or taking off is barely audible even with environmental sound turned way up. I've got lots of superb airport scenery addons but the lack of "real" airport "sounds" is lacking.ThanksF15Driver
-
Has anyone any idea who is selling the old Flight Factorys SAAb 340.I bought it a while ago and after reformatting my PC I need to re install it but have no idea where to get it now that Flight Factory is gone.Thanks Allhttp://www.flightontario.com/images/sig_asibley.gif
-
- 14 replies
- 2.1k views
-
-
Well, I installed the beautyful LOWK and LOWS scenery's, but here be the issue: When I load my A/C at either of these airports, all is well. If I fly TO either of these airports from some other distant location, there is HUGE bleedthrough on the runway and tarmacs which does not cease. (kind of a patchy flickering of the new scenery and the old underneath). I love these airports, and would love to fix this problem!Thanks ahead of time guys.Max
-
I see multiple 'tower', 'ground', etc. frequencies on many AFCADS and was wondering if there is any benefit to this? Are they all operative. Some have 2 or even 3 frequencies for 'tower', 'clearance', etc. Just a curiosity question.
-
Can someone please help? I have for some time now had this issue of FS9 not shutting down when I use the Engravity CDU with PMDG 737 800/900.If I don't use the CDU this does not happen,so I don't know if it FS9,PMDG or the CDU!!This means I have to end the process in the task manager or turn off the PC should I decide to restart FS9.This has been an ongoing problem for a considerable time so any advice would be very much appreciated.Thank you.
-
- 2 replies
- 990 views
-
-
I know I could (probably) just AFCAD it and fix it but I was wondering if anyone else has this trouble.Rolling down either runway (they cross), when you cross the other runway it's like hitting a speed bump. Bad. If anyone else knows the airport, or would like to "try it" for me I'd love to know... seems pretty awful to me...
-
Dear All,could anybody suggest where I might find good AFCADs2 for italian freeware LIPX(Verona),LIPQ(Trieste Ronchi), and for LAGO PAYWARE LIPE(Bologna),LIPZ(Venice) and LIMF(Turin)?BTW I use the excellent Ultimate Traffic.Many thanks in advanceFortunato
-
i tried hitting the print tab, after 'selecting' a flight, but it didn't print; i'm able to print other things in this game, though. thanks.
-
- 1 reply
- 834 views
-
-
This is probably pointless, and even laughable for many (all) of you, but I'm rather proud of myself.Just completed my first IFR landing using nothing but the ILS - Up to now I had flown in clear to moderately cloudy weather, but this time I hit fog while coming in to Martins State in MD. Visibility was around a mile or two I guess (I did check ATIS at the time, but I have forgotten now).Even in a sim, it was rather hairy coming in with no visual confirmation of what was around me - total whiteout. Analysis at the end showed me perfect on the glide slope, and with that I didn't see the runway until around 200-300' (I'm not sure, but if you've been there, I was probably …
-
Hi,I know there is are the following available:Feelthere/Wilco CRJ-200Feelthere/Wilco Embraer 145Aerosoft BAE146 Avro Which of these regional jets do you recommend? Are there any ones out that I am missing (both payware, and freeware)thanks!
-
I want to simulate crop spraying - I would like a good payware model that has the spray effects as well, any such thing?thanksciao!Brian S
-
- 4 replies
- 1.2k views
-
-
Happy Thanksgiving to all my friends here at AVSIM! I hope you all will be safe and that you all will enjoy the company of your family and friends. (yeah, the in-laws too!) Don Moser
-
- 8 replies
- 933 views
-
-
Does this config entry line under DISPLAY in FSX (for the FOV in FSX) also work when putting/adding it to the DISPLAY section of the FS9 config file?I did do it, and I'm not sure that it actually increased the FOV...but I guess that I just need to do an A/B test with after viewing my start up, close, add the line again, and then view the start up FOV from out my windscreen.But before I do that, has anybody used this line already and found that it did indeed increase the (F)ield (O)of (V)iew on their wide screen monitor/16:10 aspect ratio?Mitch
-
- 0 replies
- 1.7k views
-
-
It was my understanding that FS2004 could not do AI helicopters yet I see several files here for exactly that. Am I misinformed or are there programs, files, or patches that allow AI helicopter flights?
-
I added the bgl file to scenery/scenery at ksea. I checked and rechecked and nothing changed at the air port. Why?