The FS2004 (FS9) Forum

I see that the Wilco A330/A340 package has been upgraded from version 1b to version 1c. Does anyone know what the changes between the versions were?Also, an odd problem--I'm curious if anyone else has had a sound problem with the Edelweiss Air A330-200 Rolls-powered repaint that comes off the Wilco website. It doesn't have any engine sound, but the A332 repaints (NWA, AFR) and A343 repaints (AFR) I've downloaded all work fine.Lewis "Moose" GregoryDurham, North Carolina

Hi GuysI am just about to go on a 10 day South pacific cruise :D :D :D - but I want to leave you with something to chew over while I am away ;DSomething I read triggered me to look deeply into the settings of my freeware AVG anti-virus scanner. I am on Broadband and have my computer running all the time - so , when I fly the Sim (either online or standalone), I am not partial to turning off my AV programme - mainly because I am fearfull of forgetting to turn it on again.I don't have any particular issues with my Sim - it runs well except for some occasional pauses when it appears to be doing something with the harddrive (loading textures??) But I have found a setting i…

Hey folks!I was just browsing in their forums when I saw this post:http://www.captainsim.net/yabb2/YaBB.pl?num=1196789767The exterior model looks like it'll be great.I wonder how they'll package this one? We're all confident that they'll have the model done months/years before they'll do anything with the rest of the plane. Will they try to sell the exterior only, then imply that the rest of the plane is just around the corner? Naw...they'd never do that. :-lolShould be interesting as always with them. :-rollAnyone want to take bets that the B-52 will be released before they complete the 757 avionics? (if ever) Regards,Steve Dra

So, my problem is the well-known blurries on ground textures. I am sure most of you experience them from time to time and I already got used to facing them when I fly. I have also tweaked the FS9.cfg in all advisable ways.But seeing the blurries sometimes is not the same as not being able to get sharp textures at all.And this is what happens to me when I want to fly over the area of London, UK. Especially that I have purchased two excellent addons: UK2000 Gatwick and Aerosoft (SimWings) Heathrow.Just imagine this awful feeling when I come flying to London from another place and wishing to look down and enjoy the Thames, Tower Bridge, etc while on approach all I get is a t…

Mine seems to have gone 'white' probably through downloading a dodgy texture?Does anyone know what 'file' I need to look for on my disks please?Or, better still can you point me to a repair facility?Thanking all in advance.

Does anyone have this or know how or if this differs in any way from the 757 that PSS released 18 months ago or so. The link says PSS was involved, so this sounds like a repackaging of their 757. Correct me if I'm wrong....is there really any difference?Thanks,http://www.my-buddy-icon.com/Icons/objects/red_3d_plane.gifAlex ChristoffN562ZBaltimore, MD

The other day I was flying the Baron 58 and I keep the GPS up in the panel all the time. When I clicked to set a radio freq, the radio panel came up BEHIND the GPS and I had to get rid of the GPS to see all of the radio panel. Normally the radio panel comes up in FRONT of the GPS so you can set your freq, git rid of the radio and have you GPS still up. What controls which of these "windows" are in front / back? When they come up wrong how do you change them? The next time I flew this aircraft they were in "correct" order with no action from me ???? Thanks jerrycwo4

Hey All,I have been having this issue lately. I have the option to log time in FS selected. Lately, I keep getting an error saying that it can't post to Logbook (followed by tons of odd characters) and that I need to recreate it. I have created it about 5 different times.Anyone have any info?

Hi simmers of the pc skies. Why does the system time change? I can correct it to the correct time when I start to fly? When I exit FS9 and later go back in the it has changed. Why is this? How can I get it to see my system time hasn't been change at all since the last save? Thanks.Corrie

"Just Flight is pleased to announce that they have now released, by download, the long-awaited 757 Professional for Flight Simulator 2004"This was released by another vendor July 2006. Long awiated? More likely long awaited to tell us on their site that it is quite unlikely that FSX users will use this aircraft. Thanks for nothing.Randy Jura, KPDX:(

The Piper Dakota by Dreamfleet should be release very very soon.http://www.dreamfleet2000.com/Previews/236/preview_home.html

Does anybody know which plane this is and where to get it?http://forums.avsim.net/user_files/181656.jpg

Taking this article into consideration, where does Ground Environment Pro fall? I currently have UT and GE Pro, but nor FSG or Birds Eye View. Can I add FSG and Bird's Eye View to my Ground Enviroment Pro and UT?How would I go about doing that?RH

Hi Folks,I am sitting here in shock of an CTD after I flue into the near cost of tunis from the north with the path do Djerba. I have not any scenery there, nore do I have any special scenery around that area, not even any mesh that could create problems. What can I do to get rid of this CDT Problem there???_______________________Regards, Torben HadlerBeta-Tester ACLoader 3 + 4http://www.fsflightdeck.com/acloader.htmlT-A-H MultiMedia Productions Torben Hadler - http://www.t-a-h.com || [email protected]: CPU: AMD 64 Socket 939 +4000 | MoBo: MSI K8N Neo2 64 | RAM: 2048MB 400MHz DDR | NVIDIA GF7600 | Creative Sound Blaster Audigy 2 ZS 5.1Ch | CH-YOKE + Peddals; Primar…

Hello AllI recently decided to try the SAAB 340 as a change from the big jets.But i have encountered a strange and infuriating problem.I have two different variations of the 340 one model by Mike Stone and one model from Freeware Flight Group the problem is with the latter.I have installed what seems to be the only freeware panel (simple but okay)in to all my 340s. One of the models i downloaded yesterday is a very nice looking red "MESABA" livery the other FFG model is "CROSSAIR"livery.Now here is the problem when i fly the Mesaba livery everything if fine till i turn on the landing lights at that moment the red Masaba livery changes to the CROSSAIR livery ,if i switch o…

Gents- this is well worth the wait. From the people that recently released that fantastic rendition of Zurich comes Chicago O'Hare. They are making the airport as it stands in late 2007 with the on going construction. Best part is like Zurich they are doing dual platform release for FS9 as well. Check out the thread here:http://www.fsdreamteam.com/forum/index.php?topic=206.0

Hi Guys,Can someone steer me in the direction that would allow me an opportunity to obtain this aircraft. I work in the training dept for an airline that has several saab 340s in the fleet and I would really like to be able to use this as a training tool to teach our new mechanics how some of the Saab systems work. This seems to be the most accurate representation of the aircraft but as everyone knows FFS is no longer in the business.Thanks for all replys and as usualFly safeDave

Hi everyone and I know this paticular subject is dear to our hearts but I'm almost there and I hope someone is out there to guide in the final piece of te jigsaw!!Having used FS9 on my Dell ATI Radeon laptop for over 3 years without issue I recenty invested in a new desktop. What a nightmare. I never realised nvidia graphics was such pain!HP-Pavillion Vista Home Premium 32bitNvidia 8500GT (512mb)(Updated Latest Driver forceware 163.75)Quad processor 2.4Ghzand more memory etc you can swing a cat at!Having finally and painstakingly got rid of sceney shimmer using Enhanser & the Nvidia Conrol Panel (I'm very happy with that) I'm left with one final problem. As soon as ce…

Hi GuysI've never yet managed a working install of the Cloud9 KLAX airport under Vista - has anyone else?The Cloud9 forum is very, very quiet now they've gone. To give due credit though, Umberto of Cloud9 did try quite hard to help me with it, but he too gave up.It is without doubt (IMO) a very good addon, and i'd love to get it working.If anyone comes up with a solution, i'd be really grateful to hear of it.Thanks

Hi,I have been simming for many years now and have a full understanding of flying small props VFR or using VOR's NDB's flying holding patterns etc. I am now financially in a position to book a full PPL course and fly for real, my only experience apart from MSFS is 2 hours in a level D Tristar sim and a couple of hours in a Cessna with my father who is a commercial pilot. My main concern is all the bad habits I may have picked up flying fs9. Could anyone who has transitioned from fs9 to real world give me some advice on how it went?Sorry if this is the wrong forum...Thanks Rob prest EGLL

I am still using FS9. I have the following add-ons for scenery (Flight Environment, Ground Environment Pro, and the latest version of Active Sky, and all versions of Ultimate Terrain). Here is what I consider to be a problem. Under 10 to 20,000 feet, the scenery looks good

My PC is powerful. How can I get full ground scene coverage horizon to horizon? Please see attachment. I have Ground EnvironmentSanal

The AFCAD manual says you can shift the whole Airport. It says it but does not elaborate how to do it anywhere. Changing the general Lat and Long setting doesn't move anything. I have a perectly good airport and would like to move it lock, stock and barrel and not have to rebuild it node by node at another location.Bill *:-*

I have a scenery file for London Heahthrow that is showing up in AFCAD as an 'airport'. It's the T5 Heathrow building works" scenery. It's not an airport, only some buildings at the airport. How do I get it to not show up in AFCAD as the airport itself. Hope I worded this correctly.

Hi all, I recently purchased the feelthere ERJ but after installing it the autopilot refuses to work..I am running Vista 32bit..there is zero support from the folks at Feelthere so I wanted to see if anyone else has has similar problems and were they able to resolve it..and most improtantly..HOW? thanks