Crash To Desktop (CTD) Forum

Last night, I flew Qatar 777 from Doha heading to Dulles. I slept an upon waking up, my plane was almost near the east coast. I then started programming my arrival (STARS). While doing so, the game stopped responding and I waited for more than 20 minutes and had to cancel my flight :(

Hello everybody, I really need someones help on this. My fsx keeps crashing shortly after take off or when I set thrust on toga or sometimes commands go haywire on approach or final. I once even got the message that sais not enough memory or something like that. I don't know why since I have 32gb of ram. I'll put under my specs: CPU: Ryzen 5 3400G 3.7ghz Graphic card: NVIDIA GTX 1660 SUPER 6VRAM Ram: CORSAIR VENGEANCE 32GB 2666MHz DDR4 Morherboard: asus prime a320 m-r and I have an ssd. I have pretty decent specs, why is this happening? Thank you

Hello I’m getting a G2d.dll ctd I was just sitting at epkk last night it then suddenly went off checked Reliability viewer and event viewer where I saw that error had them 3-4 times now on v5? My gpu is 2080 and settings aren’t too high anyone had This before? Matt

Has anyone found a way to shut down the process that kills off FSX when the OOM error pops up? Any idea what the process is that displays the pop up message? Joe Connolly KSTL

I posted this over on Cockpitbuilders, too, but thought I should also post it here if it helps anyone else having problems. This is just an FYI and I am not 100% sure it is correct, nor do I understand why this is occurring. BUT- in building my new simulator I bought v5 of P3D and loaded it. I kept my v4.5 on the same main computer figuring I had a stable platform whilst debugging the new v5. Running on the single computer ... no issues.Then I got the avionics computer going again and, as soon as I did that I started having crashes. When I launched the G1000 software, either the software would crash on the avionics computer or, more frequently, P3D would crash and I …

Hello everyone, I have over 700 hours of flying and everything was ok. When I recently bought the PMDG 777 Base Pack, I made a flight from London to Vienna. When I entered Belgium my sim crashed. When I looked it up on the event viewer I saw that PMDG_777.dll caused the CTD. I managed to complete the flight once again, but no luck...The reason now was PMDG_777_2.dll..I have the most recent version of FSUIPC. I deleted fsx.CFG, but once again CTD over Belgium. Also I used the HIGHMEMFIX=1 fix but nothing changed...Any ideas? My report is in Greek but I believe the format is exactly the same as it is in English Όνομα ελαττωματικής εφαρμογής: fsx.exe, έκδοσ…

Hello Guys, I have searched everywhere in Google and tried everything that I have searched in Google, since no luck, which is why I came to this forumn for help, as there was no straight answer When using the PMDG 737NGX, and when I fully cross out the FSX by CTRL+C, I get the below error message Problem signature: Problem Event Name: APPCRASH Application Name: fsx.exe Application Version: 10.0.61472.0 Application Timestamp: 475e17d3 Fault Module Name: PMDG_737NGX_2.dll Fault Module Version: 11.14.0.0 Fault Module Timestamp: 572b6e57 Exception Code: …

Hello. Recently I tried to host a multiplayer session for my friends on FSX:SE. I found a great tutorial on how to set up a session. It worked great and seemed to run perfectly. That is until recently. Now whenever I host a session, after only a few minutes I get a message saying, "[hostaccountname] has left the game." Then a few moments later, everyone gets kicked out of the session, including the host account. The game doesn't crash. It just disconnects everyone. I have tried everything to fix this issue. I have tried validating files, reinstall, default settings, config file changes, uiautomationcore.dll changes. I've open and closed ports. Disabled the fir…

Hello! My P3Dv4 has been very unstable lately and I am clueless in why - It was working fine no issues last week. I haven't change anything other than had ORBX Libaries and FSDT GSX Lvl 2 Updates. That's it. GPU Usage at 45-55%, CPU Usage about the same, RAM usage 80% I think. So nothign to worry about really. CPU Temps at 85*C (Bit high but shouldn't cause crashes). When the sim crashes is pretty random. Last couple of flight attempts, all in Aerosoft A320, were on the ground at ORBX EGPH, Start of decent into ORBX EGHI, after takeoff at EGPH - Ive never had any issues with ORBX Sceneries before (I get low frames but its still us…

Hi there, I installed P3Dv5 on a separate drive yesterday, since then my until now flawlessly working v4.5 crashes with a .NET Runtime unhandled exception error. First one happened after 20min, still on ground, second one after over an hour into the flight. I've never had this one before, google doesn't tell me much. Anyone got a hint what could cause this? Thanks for any advise! Stu Log: Anwendung: Prepar3D.exe Frameworkversion: v4.0.30319 Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet. Ausnahmeinformationen: Ausnahmecode c0000005, Ausnahmeadresse 0000000000000000

Lately I have been getting CTD or FSXSE just hangs mouse icon system busy and it locks up my computer. Forum threads I have read says to not use FSXSE in full screen mode. I also read where FSXSE crashes when on final approach, or being cleared for the ILS approach. That scenario did happen to me once. Does not running in full screen mode solve this problem?

Hello, I installed version 5 of Prepar3d, during the first start I get this error message concerning the RTX 2080 video card, program blocked, I cannot intervene on the options and I have to forcefully close the program. I state that I am installing the simulator on a machine completely re-prepared with native windows10 and I have installed the latest NVIDIA drivers (445.75) Some advice?

Hi all, My p3dv4.5 CTD three or four times until now. (Not every time when I run the sim) For each time, the simulator crashed first and then a pop-up error message appeared from ASP4 (please see attached image) . After clicking ok button of the pop up message, the ASP4 shut down immediately. I have trusted ASP4 and as_srv folder in my security software. https://ibb.co/cLFxsHn Attached image.

Installed FSX:SE on my new PC. When I try to switch from full screen mode it does a CTD, haven't tested anything more but i guess it could happen. Analyzing the mdmp file with WINDBG (no event in appcrash view) this is what i get: *** WARNING: Unable to verify checksum for RAASAUDIO32.DLL *** WARNING: Unable to verify timestamp for XAudio2_4.dll *** WARNING: Unable to verify timestamp for xactengine3_4.dll KEY_VALUES_STRING: 1 Key : AV.Dereference Value: NullPtr Key : AV.Fault Value: Read Key : Analysis.CPU.Sec Value: 5 Key : Analysis.DebugAnalysisProvider.CPP Value: Create: 8007007e on…

Hello Guys, Can anyone help me with pro-atc x sounds, as recently I am having a problem with the sounds, there are no sounds (not even low volume). In the best case scenario, only when I press request clearance I am able to hear the pilot request, and the ATIS sound only, I have tried to reinstall with no luck. also I am running the program using admin privileges and it is excluded from my antivirus. Thank you

Hi guys...this is why I don't do long haul flights....about 4 hrs into it, I had a CTD. I'm running P3d V4.5. My rig has been running flawlessly for almost the past year and I have no regrets, except with flying the Aerosoft A330....here is the appcrashview: Version=1 EventType=APPCRASH EventTime=132370769758322106 ReportType=2 Consent=1 UploadTime=132370769766199055 ReportStatus=268566528 ReportIdentifier=4f555bf3-9aca-4e35-90af-d0211dd47354 IntegratorReportIdentifier=64d8d2a6-3b5b-4ec5-9cc9-74f894fa18f7 Wow64Host=34404 NsAppName=Prepar3D.exe OriginalFilename=Prepar3D.exe AppSessionGuid=00003d28-0009-0042-817d-f6055346d601 TargetAppId=W:000…

I am running FSX-SE with the following set up: GPU AMD Radeon HD 7700 series and CPU AMD FX(tm) 4350 Quad Core processor Windows 64bit and this has been running all add-ons effectively for at least three years without a problem. After updating my Quality Wings 787 to the latest version recently I have been encountering CTD recurrently after entering the ICAO code into the Arrival window on the FMC. Yesterday I managed to fly the aircraft from EGKK to LTAI until preparing to descend when CTD occurred after attempting to enter the destination airport into the EFB. The following is an event log for the CTD today after attempting to enter the ICAO code for arrival airport LT…

Dear members, I recently bought a new PC for the upcoming FS2020. I installed my P3Dv4 on it, just for the time being. But I got a problem which comes back so now and then. When I fly certain routes, fe: Detroit - Chicago, the sim turns itself automatically off and brings me back to my desktop. When i'm flying Amsterdam - Düsseldorf, nothing happens and it is all fine during the flight. So P3Dv4 shuts itself down so now and then, which is really annoying. I really don't know what the problem here is and what to do... After one of the shutdowns of the sim, I checked the Event viewer. I came accross two errors: 1st one, time: 13:51:11 Application: Prepa…

Flight Simulator X has been running fine for 6 months (new rig), but all of the sudden after selecting aircraft, location, time, etc. when you select FLY NOW the monitor screen goes black. The opening screen music can still be heard. Only the mouse cursor shows. Seems to be hung in the opening screen and not launching when FLY NOW clicked. I can't even access the task manager. I can only select PC shut down or restart. If I check Preview DirectX 10 all seems to work. I've already uninstalled and reinstalled FSX with exact same results. Also updated video driver. This issue seemed to happen after I turned on my PC a few days ago and a message appeared saying a restart …

Hi, I've got 4 Realair aircraft in my hanger - Duke Turbine V2 Legacy V2 Legacy SF-260 Both "V2" a/c crash FSX when trying to load, i.e, go to a/c selection screen, select Legacy V2, hit OK. View changes to current airport, some graphics start to load - then FSX "must close". Checking the event viewer shows the following error - Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3 Faulting module name: ucrtbase.DLL, version: 10.0.14393.2990, time stamp: 0x5caeb859 Exception code: 0xc0000417 Fault offset: 0x000872c4 Faulting process id: 0x2094 Faulting application start time: 0x01d5f6230345e938 Faultin…

Hi Just got the following error ( first time in P3D4.5Hf3) with CTD Prepar3D.exe 4.5.14.34698 5e94b5c2 clr.dll 4.8.4180.0 5e7d21b3 c0000005 000000000007735f 2240 01d638e8fe4429…

Hi everyone, I have this ennoying issue right now with the 777-200LR PMDG, running FSX-SE. It occurs always at landing in the same circumstances (fully manual final approach : no autopilot, no autothrust), after flare and while rolling, and with reverse active (really the most frustrating moment) ... Bang !!! Brutal CTD with the following event viewer error (sorry it is french but this part is kind of standard) : Nom de l’application défaillante fsx.exe, version : 10.0.62615.0, horodatage : 0x559f9a9a Nom du module défaillant : PMDG_777X.dll, version : 1.0.0.0, horodatage : 0x5b5f8601 Code d’exception : 0xc0000409 Décalage d’erreur : 0x00264c38 ID d…

Hello. Upgraded to V5 (5.0.24.34874) several days ago and since then I constantly get CTD with kernalbase.dll error in event viewer. CTDs seems to be random, couldn't figure out patter. Add-on I have installed are: ORBX global base, trees HD, buildings HD, Terraflora, ESSA and LOWW; Aerosoft A330 pro 1.0.2.0 and aerosoft EGLL pro; ActiveSky P3D open beta#3; FSUIPC (free version); GSX level 2; SODE+VDGS pack; and lastly TIDI smartAcars for one of the virtual airlines. I tried flight from orbx ESSA to ORBX LOWW with every add-on mentioned above loaded. Got CTDs during climb, cruise, taxi, at the gate, sim just freezes for severa…

Ok so when i either choose a airport and return to main menu it stalls then crashes. Or if i just click fly now it goes to the loading screen then crashes. My Win10 updated to Version 2004 (OS Build 19041.264) The reason i brought up the windows version is because thats the last thing i have done to the system. I flew a couple of days ago before the windows update and all was fine. Any suggestions please? Regards Mike

After posting about this at a p3d forum i got a helpful manual to find my crash, i have used it all, windows event viewer, appcrashviewer, what is hang and all of those. The only problem is; nothing shows up as my problem is not the sim crashing, ill come back to that. So it has been happening for some time now. I can fly to any airport in the world without these problems, including EGKK with FlyTampa, that is one seriously heavy scenery, however no problems other than a slight reduction to my frame rate. However flying to Oslo Airport, my home airport can be somewhat of a challenge. I have ORBX Norway, and orbx europe and all of those. I also own Aerosoft Mega Airport Os…