The TinMouse Support Forum

Hi guys,I've been flying the mouse for some time now...but I've just discovered some strange (at least to me) behavior. When I bank left, not only the ailerons move but also the spoilers, which I've noticed happens in other planes as well, but the thing that gets me is that when I bank right I get no spoilers, just ailerons!!!This happens also on the ground...any hints on how to fix this?thanks and forgive my english

I am sorry I repeat the FAQ question but has anyone found a solution in this problem?I have lost 2 flights one during an emergency and another during the app.I laready did what the FAQ says.Thank you in advance.

Hi all!First of all thanks for this great addon! I have a problem, but most probably it's me or my setup. I need around 1.4 EPR to brake away and to keep her at about 15Kts taxi speed. 1.4 EPR is way too much, I fly her bigger sister, B727 in real life and I don't need that kind of thrust to brake away. I've got the Ch flight sim yoke and ch pro pedals. I suspect that the brakes are binding but haven't got a clue how to correct this. Can anybody please help?Thanks,Martin

Dear Fellow Simmers,I just got my new desktop a couple of days ago, and set up everything during the nights to finally operate FS2004 smoothly.The new system came with Windows Vista, and up to now I'm pretty happy with it, except one little problem.As I tried to make a short test flight with my favorite TinMouse 737, when I selected the plane, Vista started complaining about the ILH_TCAS.GAU several times, that it's not compatible, and the plane will operate without it.Indeed, everything is fine, except the TCAS shows up as blank.I downloaded the ILH_TCAS package separately, and put everything at the right place, didn't help.Any ideas would be appreciated. Is there anybod…

Just wondering...Any failures modeled in the mouse?Which and what triggers them?Thanks,Kris

Folks; More than six months after release of FSX, and after a very frustrating week with post-SP1 FSX, I have reluctantly made the decision to cease all development effort on the TinMouse II for FSX for the indefinite future. Given the personally disappointing results of Microsoft's best efforts with SP1, I cannot see FSX ever evolving to a point that would make the effort to develop for it worth the cost in my time. I believe the development effort will be better spent moving forward on a proven platform in FS9. There are still quite a number of things I want to do with the panel, and I do intend to continue working that way, but in the FS9 environment only.RegardsBo…

Hi!In which file is it possible, to change the sensivity and the amplitude of the flight director in the tinmouse?In my last sim hours I learnd to land the feelthere / Wilco Boeing 737 Classic with 1/16miles visibility and gusty 10 knots cross wind. That was possible, because I always followed the smooth movements of the flight director. When I tried that with my tinmouse, I failed to hit the runway in the middle or even did not hit it anyway, although I had constant speed and sink rate, but no correct course because it was to difficult to follow the flight director. Maybe my computer is to slow, but with the feelthere 737 it works. I suppose they have calculated another …

Hi EverybodyI have got all the downloads ready to install but,in the update for The Tin Mouse Version 1.2 readme states "You must have the following lines in your FS9.CFG" [OldModules] fssound.d11=1 I go to C:Program FilesMicrosoft GamesFlight Simulator 9configinside this folder is another config(cascading stylesheet document)were you can type or copy these instruction to?Does anybody know if I am in the right place and where do I paste the infomation at the very bottom, after the little arrow?Can any of you experts help me, I'm in 10/10th cloud.Thanks ronhol

Hello Bob...I just did a flight this AM in the 737, and I did a no-no, I went overspeed... However no overspeed sound was heard. After landing, I looked at the sound.cfg file and noticed the wav for overspeed is "732OVSP.wav" which is missing from the sound folder. Their are other sounds missing as well, "732Stall.wav". Looking at Richard's original B732 panel, the sound wav's are in that folder.... It appears that all "732xxx.wav's" are missing.I can just copy them over, but can you confirm that in the TinmouseII base package V1.2 they are missing, or did I not RTFM..ThanksLee

Hi guys,I am enjoing the tinmouse. I like it more than my pmdg and feelthere737!!!but one question is left:what the #### are those numbers below the transponder for?everytime I start the tinmous new, they have changed, though they are not destroying anything, but you can change them! see below in the photo (red circle!) thank you!lent911http://forums.avsim.net/user_files/172695.jpg

Hi,Just a quickie. I found a post mentioning that it is possible to manually set the ASI bugs. Trouble is I can't figure out how to do it :((Cheers,Chips.

Hi Guys,I enjoy Tinmouse 737 very much. Thanks for all your work. I hope you can help me in this. After upgrading from v1.1 to v1.23 I lost the take off and landing roll sounds of the airplane. I only hear the engines. Any cure for this?Adam

Hallo,I'm wondering how to start from a "Dark and Cold" situation. Anyway since I wanted to see how it works I have managed to shut everything "off" and I have begun with the starting procedure.All went fine except the fact that I have no control over thrust lever n

Hi,I have speed brakes and flaps assigned to joystick buttons and they work just fine. Flaps deploy and also speed brakes deploy correctly.But if I open the pedestal view I can't see the respective levers moving according to the input given by the buttons; in other words I select flaps 2 with the button, they exit but the lever doesn't move.Is there any fix for that? I mean, maybe I'm too perfectionist but I'd like to know if there is a workaround. Also I have noticed that you can hear that typical "click" of the flap lever only if dragged by the mouse. Is it normal? Thank youLorenzo

Hey folks,Soon to be released is my repaint of the TM2 737 in American colours.Here are a few pics. It is almost done just a touch here n there.It is so shiny that you can almost shave with the reflection...lolDouglas.Edit: Pictures removed by moderator due to size restrictions

I'm having some problems during the installation. I think I've done fine but scrolling the list of aircrafts under FS, the 732 doesn't show.That's what I did.I have created the folder ...FS9/Aircraft/B737-200_TMOn the root I have put the .air file and the "aircraft.cfg" file.Then I have created 2 subfolders: Panel and Sound.Inside Panel I have only the .cfg file, inside Sound I have copied and paisted all relative files like A_COMB1, A-COMB2, FlapHandle, etc...with Panel.cfg file.Then I have moved to fsfsconv folder and created a subfolder called "panel.B732ADV" there inside I have copied all the remaining file of the basic package.As I told you the model will not show un…

Hi everybody,new to the forum.I have downloaded all the packages of the 737-200 as per FAQ topic, I wonder if there are any differences with the packages found over at Flightsim.Just to know if I have everything up to date.Thanks a lot and talk to you soon.Lorenzo

Hi guys,I've tried several times to get a proper pitch angle for climb or decent with CWS, provided that I'm on manual and both servos engaged and the proper use of engine power. When disengaging the aircraft goes up and down wildly until I got it in control again. Do you strongly advise to purchase Pete's FSUIPC payware version to alleviate these problems still inside this wonderful B732 pack? I love this acft/panel ever since hit the road in the TinMouse original web site and I just want to improve the way it flies, what would you advise?RegardsArt.

Bob,Can u put an oat indicator in the main panel for us that use epr table v oat?Regards

Hi!As the topic says I just downloaded your magnificent 732.I plan to learn how to cope with the INS systems and stuff, but right now I've just made a pair of flights using good ol' VOR and NDB navigation, and I have a couple of questions from what I've done with this baby so far:1. I don't really know how to get the Autopilot to control the pitch angles (or vertical speeds) when climbing or descending. I usually engage both autopilots (Aileron and Elevator) and I'm usually on HDG SEL mode and MAN (sometimes VOR/LOC but not as much as MAN) in the AP ROLL, I set the pitch commander to my desired angle in the FD but nothing seems to happen, I have to manual get to the desi…

Hi, i have downloaded the v_1.2 model file but it has a .PHP extension, so how do i actually go to open and install this one? thanks a bunch.

Today, I tried using the DME HOLD function, but without success (this is with V 1.1). I tuned the frequency of the VOR/DME I wanted to hold on NAV1, and the DME readout was displayed in the HSI. I then switched the switch at the bottom left of NAV1 to DME HOLD, and the green light came on. I now tuned a different frequency, expecting the DME display to be held, but the DME display went blank.All of this was with the switch on the right hand side of NAV1 set to "NORM". I tried the same thing with the switch set to "OVRD" (what is this switch supposed to do, by the way?), but this did not make any difference.Am I doing something wrong, or is this feature just not implemente…

Mi nombre es Juan ramos. Vivo en rep

Hello gentsI'm having some difficulties with the alignment off the INS in the 732.I got the part where to enter the POS and then press INSERT and move the MSU to ALIGN.Now is it then where you push the screw to make a fast alignment or do you have to push it before you turn the MSU to align?Because i can see on the DSRTK/STS page that the number decreases,but it stays stuck on 65.Anyone know what i'm doing wrong or should do?Thnx in advance!GreetzSteven

Greetings,from reading other posts I understand that loading fuel with an external program (I have Fuel Loader) is not possible due to the complexity of the fuel system.As these posts where a little older, I want to ask if a solution has been found in the meantime.ThanksBoris