The TinMouse Support Forum

You wanna have a Manual for the Tinmouse?I mean a real Manual?I cant believe it what i found...Ok, i dont have a Pilots Manual, but i know, where you can find a Maintanance Manual of a 737-200adv. Probably a Aerolineas Argentinas machine. Huge loads of Pages of any System, any Subsystem and things, you (n)ever want to learn. From Engine Starting to Toilet flushing, from Navigation to damage Tolerances of dents in the A/C Skin. All what you dream about and much more:http://thepiratebay.org/torrent/4676503/Bo...__SRTM_and_SWPMIf you wanna know, how many Parts Boeing put into a 737, try this one: A Parts Catalog probably with original Boeing Part numbers...http://thepirateba…

Hi,I can't get the Autobrakes to work. I'm using SAITEK Joy and rudder pedals. At touchdown they flash for one moment and disengage immediately. I have brakes assigned through FS menu. I have tried different null zones configuration to no avail.Any comments?Thanks

Hi everybody,flying the great TinMouse 737 for a long time now, I thought I'd retrofit it abit... using ISG SIM Smith FMS / NAV Display and besides that only freeware gauges, I modified the panel. I made use of the newly-released 737-Classic Panel http://library.avsim.net/esearch.php?DLID=...CatID=fs2004pan which provided me with some usefull bitmaps and the Autopilot. All in all the TinMouse flys really nice in this combination - right now i'm working on a Landingview...What do you think?RegardsJohann

Has anyone attemped to install the Reality XP 530 WAAS GPS on Tinmouse? if so, did it work and are there any potential issues to be aware of?How should I program the NAV button to switch from NAV to LRN souce, LRN souce changing from the current IRS (which I have not installed) to the RXP 530?The reason I'm considering this is that I would like to look at real-world LPV, RNAV(RNP) procedures which the 530 will do. Tinmouse is the most accurate airplane program in the FS genere that can I add the RXP530 to.Thanks in advance,Rich BollWichtia, KS

I did a clean install of the Tinmouse and downloaded and installed all of the files (in order) according to the TinMouse FAQ. However, now when I start FS9, I get an error about fssound.dll and TCAS2v7.dll being incompatible or something to that effect and when I try to load the TinMouse it says: Flight Simulator was unable to load the following: B732ADV.gauCan anyone help me out?Thanks

Ok I can't seem to figure out how to get the Delco INS connected to the 737-200's autopilot. In the FAQ it talks about the RAD/NAV button, but when I click on it the A/P directs me in the wrong direction (almost due north). How do I know it

Hi fellas,I have a problem at takeoff, the engines haven

Hi, boys and girls (if any).I was having so much fun with my super TM II B732 that I decided I would install the RealityXP WX500 on it, with the unfortunate result of having both the airspeed indicator completely inoperative and "Low Pressure" caution lights on all fuel pumps. Since I changed FSUIPC module (to 3.72) at the same time I installed RXP WX500, I reverted back to the FSUIPC version that I had (3.81), with no success. I uninstalled RXP WX500, no success. I've reinstalled all of the aircraft, with no success either. Any advise?Thanks in advance,Ed

Hi all is there a co-pilot panel avalible as an extra view so i can place it on a seperate monitor? there was a thread with one that someone had made but can't find where to get it.Thanks all

Hey Bob, Just a quick question in regards to your panel. With F1/DF generously donating the 37-200 aircraft models to TinMouse was there any chance of them also letting you use the panel bitmaps that were going to be used for this project. I remember seeing them a long time ago when they were first posted in the beginning stages and they were outstanding so it was something that just crossed my mind. CheersBret

Some of the d/l links such as the 124 update and FDE update are broken. Is there another location to d/l these at.Thanks for any help,Sean

I have the same problem as a previous post ie only the port thrust reverser deploys the other just attempts to and just goes in and out.Nobody appears to have answered the previous post so i thought i would try again. Note: when tinmouse installed this affects even the default 737.It does not appear to be a FSUIPC problem.

Hello, Could anyone tell me if there is just one zip file for the Tinmouse 737? I mean a file with the aircraft, model, panel etc. So far I have downloaded 4 files for Tinmouse non which appear to be complete. Also, why does it take an age to download 48mb when I have the capability of 20mb speed? Many thanks

Hi: please tell me where can I download the complete TinMouse2 file of this airplane. Thanks and regards, Flacs.

Hey all,I have started to build the Sperry 177 Ap which is still in the early stages. Just a few pictures showing progress.Implemented HDG, Nav, Alt Sel, Alt Hold, Both Ap channel modes, Vor/Loc Man Mode. Logic for CWS and some other submodes to be ironed out. Docs for the 177 and related systems are a little tough to come by but what the hey.Regards,Douglashttp://forums.avsim.net/user_files/157379.jpghttp://forums.avsim.net/user_files/157380.jpghttp://forums.avsim.net/user_files/157381.jpghttp://forums.avsim.net/user_files/157382.jpg

Hi Bob,Are you still with us , laddie ? :( Jack

1.) I arm my spoilers so that the green "speed brake armed" light comes on, but on touchdown, the spoilers do not deploy until the reverse thrust is deployed.2.) Below about 170kts, in the landing configuration, any change to the trim is dramatic.3.) In the exterior views, or with the internal side views or overhead panel there is a constant screaming sound.Are these problems a sign that the aircraft is not installed properly or are these just bugs? Thanks.

This is an optional landing view that I am currently working on. I would like to hear constructive comments regarding the panel.Thanks,Jason

Guys,i know that is not freeware but i release a 737-200 ADV -15 engines for FOC Danur 2003 ...just go to the forum support and check for aircraft library.see youPhil

Where can I find the Omykron docs for the -17 engines?

Hi... Would someone be able to post the necessary changes in FSUIPC to get the flaps and spoilers working - via - joystick controls... I just can't live without my CH Quad Throttle... If I recall it just changes the panel to respond to "Funtion" key presses... Maybe - we could add it to the FAQ ??? I am back flying jets in FS and I always find myself in the "Tin Mouse"... I've been spending a great deal of time - lately - with the Coolsky Mad Dog for FS9 - too... That is another very impressive ride that doesn't seem to get the attention it warrants... Anyways - always glad to see the mouse project still alive... Bob - Thanks for all you do !!!Regards,Scott…

Hi,I've searched this forum as well as the ISG1 support forum, but was unable to find my problem.I've added the ISG1 gauges to the TinMouseII. The only thing that doesn't seem to be working is when I load a flight plan into the MCU, the fuel amount to be loaded that's specified in the flight plan does not load. I used FSBuild to create the plan and exported it to ISG. I also installed the gauges in the default 737, and fuel loading via the flight plan works fine in that aircraft. I used the panel.cfg available for the TinMouseII on the ISG1 website. I also use a registered copy of FSUIPC.Has anyone else experienced this and/or could shed some light? Thanks!Mike A.

Hello Together,need help in getting the AP working.:Can't activate the Rollmode, Paddel wan't move at all.Pitchmode is ok.The other issue:FS9 will collapse when finishing it, using VISTA.Thank you,Regards from MunichThomasB767,B757,B737 Classic, B737 Legacy

I've recently started to learn the great 737-200 and panel. I've read quite a few posts about problems involving the pressurization alarm horn. My specific issue is that I am unable to de-activate this horn by pressing either of the cut out buttons. Neither appears to be functional. I believe I have all the updates installed to 1.24.Advice appreciated.Great aircraft and panel.ThanksWarren

Hi all,I've read through the suggested guide and I am still encountering a few problems.1) The ELEV will not engage under ANY circumstances. Cannot get any pitch control or altitude hold modes.2) Upon disengaging the AIL, it is only able to re-engage itself sporadically. Could this be related to my joystick, if it thinks pressure is being applied? I'm using a Logitech Force 3D Pro, and sometimes the spring centers itself just a nudge off calibrated center.Cheers,Ian.