The VOXATC Support Forum

I get the following error after installing VoxATCX (latest version, downloaded yesterday)Retrieving the COM class factory for component with CLSID {41B89B6B-9399-11D2-9623-00C04F8EE628} failed due to the following error: 80040111. at VATrainer.Form1.Form1_Activated(Object sender, EventArgs e)My system is Windows XP x64 SP2 with latest updates..NET Framework 2.0 SP2, 3.0SP2 and 3.5SP1 are installed. Also all MSXML versions and C++ 2005 & C++2008.Installed MS SPeech 5.1 just now, but that didn't help either. I emailed VoXATC yesterday evening about this, but haven't received any reply (like a " message received"). They should be based in the UK, right? So hardly any t…

Yep - someone else who's having trouble seeing IA aircraft using VOXATC and MyTraffic 2010....I'm using FSX with SP2, on Vista with SP2, and UK VFR Airfields installed.I purchased VOXATC UK v5.63 with voices and all worked fine at about 35% traffic setting on VOXATC and FSX traffic set to zero, plenty of VOXATC traffic showing and interacting at UK airfields. I thought I'd try MyTraffic 2010 because of good reports I've read, including those related to the way it works with VOXATC. However I now get no traffic at all.[*]MyTraffic 2010 works fine when FSX traffic sliders are moved, but this traffic is not controlled by VOXATC because VOXATC hasn't originated it.[*]I've r…

Hello,is there anybody that uses VoxATC X with Ultimate Traffic 2?I have bought Ultimate Traffic 2 and if I try to fly with voxATC X enabled i don't see any UT2 AI traffic. With MyTraffic X I can see correctly the AI Traffic but I have bought the UT2 because I think that it is more real.Obviously, I have disabled the traffic from FSX settings menu.How can I see the AI Traffic of Ultimate Traffic 2 with VoxATC X enabled?Is it compatible product with VoxATC X?Thank you so much.Christian.

Hello All,I have just purchased VOX ATC UK version and am very pleased with it...I just have 2 problems...The main one being I cannot get the controller to come through my headset..I have all the settings correct in FSX.....I managed to do it with the demo version...what am I doing wrong...secondly the controller is talking to fast......how can I slow him/her down...Dave

Hi!I've just bought VoxATCX UK DVD. I put my order with RCSimulations, and they did a great job (very fast delivery!). I have now been flying for a couple of days

I used to have VoxATC X on an older rig running Win XP. I want to install the latest versio on my Win 7 64 bit system. Now, I have no clue where my registration code is. I have searched my e-mails but to no avail. I did however copy all my FSX files when building my new rig, so I have my old InternalWorkings folder. Can I copy and paste one of the files, if the registration is stored there, to make it work? You can do that with FSUIPC, so I figured...I know the option of contacting VoxATC, but I expect slow response, so I

This may be a question that I should know already, but my old brain matter refuses to cooperate in this one?Some frequencis given in Vox Atc have 3 digits ater the decimal point. I can only get 2 on the Cessna I am using with it (the same on my goflight module GF166?)s there a way to change this in FSX or can I edit the vox files to reflect a 2 decimal point freqThnk youNormBy the way, I have been using VOX ATC for 2 years and itis fantastic!

If this has been asked before, my apologies. Can one run VoxAtc on a networked computer different from the one FSX is installed on? I have Dawson's FSUPC and everything works ok, but VoxAtc decreases my FPS when on the ground to may taxi a little jerky.Danny

Hello All,I solved all my problems,so now have ATC through my headset.Just completed 5 circuits at my local field and all I can say is WOW...it has taken my flying on the PC to another level...Worked flawlessly although ATT Charles always sounds like he is gasping for breath lol...and maybe one or two to many go arounds from the AI traffic but I can live with that.Thank you to the developers I am bowled over...Dave

Hello

Been flying the VFR to Eppley training flight and keep getting hit by other C-172s from above and behind. Is that a bug in the flight programming? It isn't as if they are coming at me from a direction that I could see and avoid.Really enjoying Voxatc anyway.Danny

Hi all,After a lot of frustration and trials and errors with VOXatc, i finally managed to make it work at its best.It's a great software and it's giving my simulation a whole new dimension :)Still it seems, when arriving at my hub (LPPT - Lisbon) that ground always give me instructions to taxi to the same gate every time.Can anyone confirm this or am i doing something wrong?It's highly unrealistic giving me the same gate every time.Kind regards,Carlos

I've done three VFR flights with VOXATC now. On not one of them has the software been able to run the flight from start to finish without some sort of messing around to get it going again.It especially likes to forget what it was doing after it asks for a frequency change. Sometimes disabling and then re-enabling VOXATS seems to get it going again. I just finished a flight where I landed the aircraft and left the runway before being able to get VOXATS to allow me to communicate with the tower. And then I had to pretend I had only just got the airfield in sight and go through every comms I should have done before landing.When destination towers do recognise me it doesn…

Hello everybody,I have the following problem when I start voxatc X with Flythemaddog Product.I have the 2008 version of Flythemaddog and when i start voxatc X, it give to me the follow message:startup failed: unknow fs aircraft type LSH Leonardo...How can i solve this problem?Thank you so much,Christian.

Using vox atc uk and fs9, does anyone know of any way to direct ai traffic to specific spots. Vox atc uses the parking list in the order set in afcad, ie if you have gate 1, gate 2, etc, it will use in that order. Basically i'm trying to set up the EGCC afcad correctly with airlines parking at respective terminals however when using vox atc multiplayer, it seems to ignore the airline parking codes.Many thanks for any helpDarren

Any experience with this latest USB version? I'd like to use my DC H10-13.4 headset with VoxATC and I like the idea of not having to replace 9V batteries all the time. I have a sound card as my primary sound source. Does this version mean I have to go back to the on-board sound chip because of the USB connector?krswen

"The installer was corrupted.. bla bla bla"At close of of the end, it suddenly stops and this problem occurs.What to do?I have windows vista 32bit.

Am I correct in that VOXATC is incompatible with Windows XP 64-bit? (because there is no SAPI 5.1 or other version ever made for it)Randy Jura, KPDX

OK, i am being really stupid here but i just cant get VOXATC to see my flight plan and let me then ammend it to add sids/stars.I create a FP using FSX and save it (which it saves as a .PLN file). I then go to the VOX sid setup wizard, but it doesnt see the plan i have ceated because VOX is only looking for a .FLT file.What do i have to do to save the flight plan as .FLT so that VOX will recognize it?Thanks in advance for your help

I have downloaded the Vista (non voice) version of VoxATC to try it out before buying it, but I'm having a problen when pressing the 'Enable' button. I am using Windows 7 Pro x64, installation was fine and I installed a voxatc gauge in the Carenado 182RG. I loaded the demo flight VFR Kansas City and then changed aircraft to the 182RG, the voxatc window appeared and I pressed 'Enable' but it said "Fatal Error disable voxatc".The voxatc support guy sent me a tool to extract the fault log, he said something is wrong with 'simconnect' but I have two other programs on the computer ASA and Plan-G that connect to FSX with no problems using simconnect ? I have included a porti…

Hi,I often use VOXATC X...I was just wondering if a version for FS9 is available?Thanks,Bob

Hold problemWhen i fly the mopil arrival at LFPG, on IAF VELER Vox ATC prompt me "Fly Hold as specified" and no more contact.I defined STAR with start at Mopil and end at Veler and VoxATC instructs me to fly the mopil arrival on Mopil.Can anyone help me? Christian

Hello All,I've installed VOXATC now, and now have some questions...First, the plane I prefer to fly is the Carenado PA28 Arrow. But the VOXATC Panel setup does not present this as an option. What is it that determines whether a plane can be used with VOXATC. I did notice this aircraft already has many instrument view options. Could it just be that it has run out of slots?Second, as a VFR flyer who uses photographic scenery I do like to use spot view a lot. However, it seems I must be in instrument view for the panel to work. If the panel won't display does that mean that VOXATC will not be working either in that view? And is there a way I can get the panel up in t…

Hello All,I wondered if I could get some feedback from real users! I fly mainly in the UK. I'm happy with the key press method of ATC, but would prefer realistic procedures and especially would like UK accents.So although I would use headset and voice commands I don't want to be forced to use them all the time. I'd like to have the choice. Given the hefty price tag for this product I don't want to be left with all or nothing!Also I guess it would be useful for me to know if it uses a lot of processing resource, as I'd hate to find my frame rates challenged :( So, I'd appreciate any info you can give me to clear up these questions.RegardsJon

Hi, folks. I've been really enjoying VoxATC. I love how well it works for me, overall, especially since I sprung for some good Cepstral voices. However, I have noticed that there is no AI traffic parked at the gates at my departure airport (usually, KBTV - Burlington, VT). I do see traffic inbound to land, but nothing at the gates. I turned up the VoxATC traffic setting to 90% (that's fun) in hopes that would help...no luck (yes, the FSX stock traffic is set to zero in the config file I use with VoxATC). I also just added MyTraffic 5.2 Pro to my setup (love it so far), but this was happening even before that add-on. Ideas? Okay, thanks in advance for any and all h…