The VOXATC Support Forum

I have set up my AI or so i thought. I removed the FSX aircraft folders from the FSX airplanes folder (as i only want UT2 AI), set UT2 & FSX traffic to zero and then ran the Indexer, after which i replaced my fsx aircraft and ran the UT2 Bridge tool and set Vox traffic to 50%. But no AI and no comunications to it from VOX.I am sure it is me and not Vox here, so anybody know what i have done wrong?

Hi, im new to voxatc, i bought the softwear the other day and as i tried to install it it froze right at the end, i installed all the voices then it comes too the VOXATC indexer Processing Facility Data, and it gets stuck on"c:\program files (x86)\microsoft games\microsoft flight simulator x\scenery\0202\scenery\OBX23220.bgl" i dont seem to beable to find any info out about this on line either any help would be greatfulthanks people

I noticed that when I started using VoxATC (v6) that the sound from AES is being cutoff. Is there anything I can do about it? Is this because VoxATC and AES both use the headphones as a communicating device or something else?All I hear is (during pushback for instance): "Please release...." (it should be please release parking brakes)"Left is clear...." (it should be "left is clear, right is clear, Okay to start engines")It does this for all sounds.The files themselves are okay when I play them in Media Player, but the combination of both VoxATC and AES produces this (unwanted) result.Any tips? (I'll post this on Aerosoft's forum too)FSX Gold Edition (with SP's and Acc pa…

Been trying and trying, but all i get is as per topic title then install exits. W7 64bit and using Install.exeDo i have to install in Program Files (x86)? Because i really don't want to unless necessary. Ohter than that, what am i doing wrong?Need help here because i am seriously interested i purchasing, but can't even get as far as trying it out.Thanks in advance,

Hi All,I am enjoying VoxATC a lot but recently something in a previous flight must have gone wrong.I am now standing on EHAM parked at gate E6. (FSC and EFB correctly display my position).Flight plan has been generated by FSC and is loaded through the FSX menubar (Flightplanner/load/ok) and properly loaded into the PMDG's 737NGX FMC.HOwever when enabling voxatc it wants me to contact Schiphol Approach (126.675) and report:Schiphol approach Fedex73 (c/s) with you leaving altitude zero feet climbing flight level three three zero.I have disabled and enabled voxatc many times (as per instruction in voaxtc help pdf page 80) but no fix.Can anyone indicate what to do?I want my…

.... flying VFR, half way into the route, I found out that My destination, is MVFR, don't want to take a chance, can I divert, without massing VOXATC?If the answer is yes, how do I do it ? Tnx in advance Yair

Just a quick question. Does VoxATC have any kind of DRM or copy protection? I see it has a "registration" system. I don't mind if I just need a code, but if it requires activation, reauthorization each time I reinstall, periodic check-ins, etc. then it's a deaibreaker. I have a habit of keeping and using software decades after it's out of support.

Hello,Ok, so apparently there is trial version to download. I'd like to try it out, however one thing is making me worry... the file to download is only 6MB? Where is the trick?

I can hear the FSX ATC pretty well like every other sounds effects of PMDG 737 NGX.When I load the demo the VOX ATC volume is extrmely low instead, I would need to raise it by ca. 200% but I can't find a sound volume settings within voxatc.Could you please let me know how can I raise by at least 200% the voxatc volume ?Thx

I've become a big fan of VOX. It's all I use when I'm flying in FSX which is most of the time. Occasionally though, I'll fly with FS9. I have to revert to PFE and I start having withdrawal. It's a shame that the latest version isn't compatable with FS9 also.

I have done everything I can think of and find on the forum here, I am still getting the fatal error message, I find the instructions supplied with this very ambiguous and most unhelpful as regards setting the thing up.First off I have windows 7 64 bit, I have no idea which installer to use (I tried both but the result was the same) as it says if you are installing to vista use this, but does not indicate if that is to differentiate vista from 7 or something else, it would be far better if it was more specific.I have successfully installed voxpop voices and run right through the speech to text setup doing all the training etcI have not registered the program as I am tryin…

New to Vox and love it!Question - I'm running this VoxPop Server Control thing and have no clue what it is or what it does. Can someone please explain it a little to me?ThanksTony

When Landing, the tower always asks me to enter runway (whatever) on the 45.... what do they m,ean enter on the 45 ??Thanks for any answersCYXE01Justin

..just installed a new Bird, any idea how to add VOXTC ??????TnxYair

Hi,My PC is windows 7 and I have installed the demo VoxATC.In the Control Panel I have tried "Text To Speech" but there is no "Speech Recognition Tab".But under the "Text To Speech" I have two choices:If I choose "Start Speech Recognition" I get this Error Message: "The speech Recognition is not supported in the actual language"If I choose "Add a microphone" I get this Error Message: "Your current default speech engine foes not support this action at this time"Reading page 6 in the VoxATC manual I have tried to download and install the "Speech SDK 5.1" because I could not find the "Microsoft Speech Recognizer 8.0 for Windows (English US)".Then I started FSX loading the…

Okay guys , this is the situation; I loaded the flight plane Enable VoxATC Got the initial message prompt me to change frequency. I tune up to frequency Asking for field advisory Color change to magenta And that's about it, nothing from there. Any idea ?????? Appreciate any help Yair

Hello there !Is there any fix for this ? Due to FSX's limited number of windows in panel.cfg (52 max I believe), I find impossible to use PMDG MD11's in conjunction with FSCrew and VoxATC : the number of windows exceeds FSX limit : so the only way to use FS2Crew is to deactivate VoxATC entries in the panel cfg file. Too bad, I think...Anybody aware of some tip to correct this ?Thanks by advanceHenri RPS : I haven't tested 744's, but I believe there's a problem too, since this aircraft features a large number of windows...

Due to the fact Vox ATC didn't recognize my 737 NGX I quit fiddling with it.After few days I managed to get it work editing the panel of NGX but now Vox ATC demo expired.Is there perhaps a way to have a second chance to play the demo ?I am of course really interested on buying it but before spending 50 euros I have at least to give it a try.Thx

okay, I get close to my destination, and on VOXAtc message to Tower, is my distance from origin, and not one of the point in my current vacancy, make no sense ?????? Yair

Hey guys, How long does it take to get a reg number. I payed though PayPal , got a invoice number. Been waiting for the last 3 days for an email with my reg number...... Getting a bit disappointed......Justincyxe

Hi all,I'm a new user to VOX ATC but not a new user to other ATC programs such as PFE etc. So far it all seems to be working very well including the speech recognition and sid and star selection works when the flight play is correctly made.However I only fly IFR and mostly fly the PMDG 737NGX. It all works well but I find the approach setup can be a bit fiddly. When i'm on the ground at my destination airport the ATIS works fine, it gives me the wind and runway and ground will also assign my SID if its relevant. I take off, fly the SID and get to cruise altitude with no problems from ATC. However this is where things get a little wild. I can't pull up the destination…

I just received a mail from the team at Ivona that they will be releasing an update next month so that the voices will say 'reed back' and not 'red back'.That's service for you! I only contacted them three days ago...

Hello,For some reason VoxAtc 6 would not start anymore!FATAL ERROR! Please disable VoxATCAfter some problems with starting VaxAtc, I could not enable VoxAtc for any flights!!!!So I uninstalled it and did a reboot run CCleaner and did a reinstall (now 2X)Installation under admin without the virusscan active!Only thing I don't see the Gauge file from VoxAtc pop up anymore during the first startup FSX !!!!I have run the VoxATC indexer!Use windows 7 prof 64bitUnable to use VoxATC Panel Setup and ATC Aircraft Type Name Editor !!!!Get: VAPanelSelect has stopped workingDescription:Stopped workingProblem signature:Problem Event Name: CLR20r3Problem Signature 01: vapanelselect.exe…

1. Does anyone know if VoxATX (ver6) supports VRP's please?I use to fly from EGGO Liverpool John Lennon and the exit and re-entry into the circuit always included a reference to the relevant VRP, which VoxATC has never done for me yet.2. Also, as soon as leaving the circuit Liverpool Tower 126.35 hands you over to Liverpool Approach 119.85 in real life, whereas in VoxATC I'm left to stay with Liverpool Tower or some unspecified 'on-route frequency'! Am I doing something wrong there - or is my setup duff in some way please?3. While I'm here as well, is there any support for the low level route between Liverpool and Manchester CTA's? :)Thanks for any guidance anyone can of…

Hello,My plane Level D B767 is parked at airport TNCM !ATC gives me runway 10 for departure!And taxi via the parralel taxiway right beside the runway!!But I have seen on dvd movies bigger planes do not use the parralel taxiway only small planes do !!!!The bigger planes enter the runway rightaway and taxi to runway 10 and turn there and departure !!Why is VoxAtc orders me to use the parralel taxiway ????And how can I get the right procedures for entering the runway for taxi rightaway ????Is there something like a request so they tell me to use the ruway for taxi ????Like to hear!Kind regard Robert!http://caribbean.sunlandamerica.com/CTE130210/TNCM.pdf