The VOXATC Support Forum

Hello Will VoxATC work with Ultimate Traffic Live in P3D V4.1 ??

Is there gonna be any update for this addon or the whole thing is dead? I am not happy with the current version and i feel disapointed for buying version 7 .I find bugs everyday in different airports and the co pilot perfomes pretty bad. I tried to contact via the vox atc site but they never answer. All other addons i have are working perfectly except voxatc.

I just updated to 7.42 everything seems good and about 6-8 mins in Prepar3d shuts down. I get application error along with .net runtime error. Has anyone else experienced a similar issue after installing 7.42? Thanks, Jimmy Mac

Team You may have read another topic mentioning a "Fatal Error" on departure ...https://www.avsim.com/forums/topic/543724-v742-missing-files/. I thought it better to start this topic with a more appropriate title ..... given its "interesting" consequences. Now I can't recall similar issues with previous V7's but it seems if one nominates an enroute hold in FlightPlan Extras, there is likely to be this problem. For now, given early days with V742, I have only identified the issue happens on a KSFO to KSEA routeing via the (nominated hold) BTG (HAWKZ star transition) ...... It maybe that normal descent on that route would begin before BTG & hence it …

I've read reference in other topics & see similar about "Exceptions" in the log about not finding 2 files .... AstiInt & iFly.dll .... in the VoxATC P3D4 folder during the initialising phase.. Since installing V742, I am also having "FATAL ERRORS" on transfer to departure, well after a successful clearance / pushback / taxi & takeoff after the above. The curious part is where are those files from if they're not included by the installer & are they required ie the later departure problem flags "Aircraft exception Object reference not set to an instance of an object" which suggests a different issue. Any thoughts appreciated, any similar probl…

Good Morning, To move to the latest release of VoxAtc do I have to uninstall the current release and then install the new? Main software and voice app's? Thanks, Jimmy Mac

Hi, based on the missing UT live bridge, I decided to create and use own AI as mentioned here in some other threads. It took a long time, but it works very well with VoxATC. Unfortunately I have a strange problem with the AI at EHAM (base of KLM). Within VoxATC the traffic density is set to 30% but I can't see any KLM aircrafts. The other airlines at EHAM are visible. On other airports no problem, KLM is available. Only with EHAM (FlyTampa Version for P3D) I have this behavior. If I set the P3D density value to 30% KLM is available. But I understood that there is a different between the settings in VoxATC and the SIM? And yes I start the VoxATC indexer after eac…

Team Just updated to Vox 741 on server PC (P3DV41) succesfully ..... but have a question about comms before take-off. The circumstance that annoys somewhat is that if I use co-pilot (PNF), not only can i not toggle back to pilot (PF) until taxi clearance is issued but more annoyingly is that PNF asks for taxi directly after startup, many minutes early (ie does not wait for both a pushback & startup to complete). However, if as PF I do the comms, I control the timing of the requests (including a pushback & start, not possible with PNF) and handover to the PNF during taxi. I guess the question/s are: Is this the way it is or am I missing a sett…

Hi ! Do you know how work voxatc with traffic bgl file ? I've bought a french addon : trafic France who gives real non commercial trafic with same planes than french airfileds. He created traffic file bgl in this own folder. I tried to rename the p3d file's traffic, but voxatc don't work. How could I mix p3d traffic (or just flght traffic) and this french trafic ? Thanks

I have setup VoxATC in a network setting according to the instructions. My PC1 is the client now, whereas my PC3 is the server. Both PC's use Windows 10. My flight simulator is P3D 4.2. My VoxATC version is 7.41. In P3D (PC1) I select a flight plan before starting the VoxATC modules on both PC's. My head set is connected to PC3. After having listened to ATIS, I get this message: Read back instructions\clearance while I'm still at the ATIS frequency. After having read back the given instruction, VoxATC orders me to tune to the Clearance Delivery frequency. After having selected the CD frequency, I get this message: Select option 0. Request departure instruction…

Sorry (Jay), I have a network issue again. When I fly, using VoxATC at the simulator PC only, I am handed over from Schiphol departure to Amsterdam center properly. But when I fly in a network configuration, using the remote PC as the VoxATC server, I am handed over to oceanic center. So at the remote PC, VoxATC has no info on the FIR name. The frequency is right though (119.175). How can I repair this? Could there be a connection with my other network problem (no transfer of flight plans from the simulator PC to the remote PC, see my other forum post)? Hans Hartvelt The Netherlands

Hi can we have choise to use another and more accurate speech recognition program than Microsoft built-in speech recognition program?

Hi can we have choise to use another and more accurate speech recognition program than Microsoft built-in speech recognition program?

Hello All: I've recently started using VoxATC in P3D v4.3. I'm generally happy with the experience. I have a few questions that some of you more experienced VoxATC users may be able to answer. I am currently using default AI traffic. Can I use aftermarket AI traffic with VoxATC? If so, what aftermarket AI traffic is recommended? At Orbx KBVS, VoxATC generates AI traffic using only one aircraft model, a Mooney Bravo. Does anyone have an idea why this is happening? Thanks! Chris

Having had problems first with VoxATC in FSX-SE and then with FSX-SE itself, I re-installed FSX-SE (and checked that it runs OK) and then installed VoxATC into the fresh sim. The VoxATC installation and panel configuration steps appeared to proceed normally, but there is no VoxATC entry in the instrument panel. The VoxATC gauges are present in the gauges folder, and the aircraft's panel.cfg (default C172 for the present) seems OK, with the correct VoxATC entries. I tried running the VoxATC VFR flight to see if the prompt window would show up, but it didn't. I've tried googling the problem, and none of the proposed solutions worked for me. Any suggestions will be welcome. …

I installed the Flight 1 Mustang into P3D V4. All went well. Mustang appears in P3D just fine. I then ran the EZCA2 Config Tool. It seems to have no problem. However when I try to start VOXATC, it fails with the invalid aircraft message. Any ideas?? Tom

I tried to make Voxatc speech work. I did not succeed in doing it probably because of the new windows 10 update. In this forum I read the possibility to shorten the training files from Voxatc. But I could not find how to do that. Is there someone who can help me with this or point me to the proper thread? I installed the right speech recognizer in windows . Thanks for help Wim Mens

I'm tempted to give this a try to replace my old MT6 installation. I note that some were using it OK before some of the latest updates. I'm wondering how it works now with VOXATC and how does the GA traffic work? Thanks!

Has anyone experience and/or recommendations with VoxATC and changing Simulation rate in P3D (Time acceleration) ? Thanks Michael

I just re-installed voxatc vs 7.41.Did a flight lege-cle35 lecd. ATC told me to descend way too late .So late not even an f-16 could have descendedand make it without going around. I went missed and the minute I did and clicked on the menu (cant recall the number) vox told me to go around,gave me altidue and hdg and fatal error disable voxtatc appeared. I did the same flight again and the same thing happened again. Am I missing something ? Thanks

Just checking to see if it will need an update....

Hi all, I have been getting this error in a very specific circumstance. At YPJT Jandakot airport, in the a2a 172 with a custom paint job for the local Singapore Flying School. The aircraft registration is VHYGU. I wonder if this structure is incompatible with VoxAtc. Or could it be something completely different? Here is the error log: Cannot create unique G callsign at com.intworkings.voxatc.CallsignImpl.CreateGCallsign() at com.intworkings.voxatc.FlightPlanner.SetupDepartureFPFromBGLFP(BGLFlightPlan bfp, Aerodrome adIn) at com.intworkings.voxatc.FlightPlanner.GetDeparture(Aerodrome adIn, Int32 quadrant) at com.intworkings.voxatc.Depart…

Hi all I used VoxATC Runway Number Updater (RNU) sucessfully for years. A short while ago it stopped working. I am often installing new scenery and aircraft (payware only) and put it down to that. When P3Dv4.3 was released I decided to go for a complete blitz of my system and reinstalled everything. I hoped this would fix the RNU. I have up to date AIRAC from Navigraph and when I run RNU it starts scanning the airports and then after a minute or two just closes. The window vanishes and no error message is given. I have no idea of how to even start diagnosing this. I DO have all Orbx global vector scenery installed as well as all regions with the excep…

I have been flying a couple of flights in Europe recently using P3d v 4.2,VoxATC ,PMDG B737800 and flightplans made with Little Navmap. I let the «flight officer» operate the radio. Most of the time I hear the the ATC communication between the controller and my first officer, but a couple of times when we are handed over to a new controller, I don’t hear the controller, only my first officers respond to what ATC is saying. Is it a way to avoid this, or is it a bug in VoxATC?

Hi All, I have a problem with my ai traffic on pushback. The aircrafts stutters on pushback. The aircrafts doesn't roll on pushback, it jumps onemeter make a step to left or right an jump one meter and so an. If the aircraft is in position it rolls forward and it is ok. Any suggestions for my problem? I'm using P3D v4.3. Regards Dieter