The VOXATC Support Forum

I know this has been asked before but if I don't fly that much and I want to hear atc (not the crappy FSX type atc) and I have Ivona or any other voices..can I just listen to the AI's talk to the tower or No? I have had them all but just curious. I think I am more of a Planespotter now than anything else. Any ideas, Thank you, Bestest, BobM.

Hi Guys, When I have completed a circuit "Taxi Clear of Runway" pops up on the prompt, VOX ATC will allow me to continue with circuits using correct phraseology. However, If I then complete 3 circuits and then exit the runway"Taxi clear of runway" remains in the prompts and I get no instructions to go to parking. Is this correct or do I have to do something to get parking instructions?. Dave

Has anybody noticed in P3d4, whether VOXATC is including an AI aircraft models that are being added via add-on.xml rather than simobjects.cfg? Thanks.

I reinstall 7.41, install completes. Open apps in windows 10. VoxAtc dropdown icon shows. I run the indexer. Cannot find any way to launch(.exe) anywhere. Any ideas? This all started when trying to install new voices. Must add that I deleted folders in “internal workings” file before reinstall.

Does anybody have an idea how to get any support or an Email adress which might get an answer ? I tried their contact form on the Website, no answer. Several problems in 7.4.1 1. Both RunwayNumberUpdate and Procedure Pronunciation Editor crash with 'Windows has stopped working'. Windows 10, .NET latest version 4.71, both running as administrator. 2. I have created two flightplans in PFPX, one is working, the other leads to 'Fatal error, disable VOXATC' error in P3Dv4 (during of after initialization). Both short routes for testing (Frankfurt to Munich works, Stuttgart to Salzburg doesn't). I don't have the slightest idea why. Same AIRAC is installed and Lev…

Just wondering whether anyone can help or advise me. Downloaded VOXATC for a trial period of seven days but was also having problems with FSX flight loading due to third party add-on which ultimately meant that to overcome that problem was to do a complete re-install of FSX. I had only run VOXATC on the one occasion and after re-installing the trial version (2 days later) and clicked on the green menu to start VOX in FSX it came up with registration required. I had only run it once on one day and would have thought that the software would have given me the remaining days left. I really want to try VOXATC out properly to see whether or not it suits me before c…

Greetings all, I was curious if anyone knew how to apply a radio sound effect or filter to a TTS voice? I use Ivona or Cereproc voices but also have found a few Windows voices and have noticed that something that tends to kill the immersion is that there's not radio effect to the voices. The only ones that do have this effect are the VOXPOP voices which sound a little too robotic for my tastes. Was just curious if anyone had figured out a way to add this effect to VOXATC?

I wonder if anyone can help with a very annoying issue I'm having ! Been trying to sort a problem with fatal error everytime I try and make contact with Lands End tower 120.250, and thought as final idea would purchase AFX to see if a fictitious freq may solve ! Anyway, this has now highlighted a new prob in so much as I am unable to make any com freq changes into vox 7.42 . AFX works fine with saving in FSX SE , and in spite of running the indexer several times , I am unable to implement my changes into Voxatc panel, and after trying to update another airfield with a new real world A/G radio freq this also remains unchanged !! I don't understand how after ru…

Hi. Recently when I am flying in Asia the VOXATC only gives me mmhg instead of hpa and transition level/height is not corrct even if the simulator, P3Dv4 is correct setup. As I recall there is a setting somewhere in VOAXATC but I have not found it agian. Why is this happening? Am using PMDG 738 as Aircraft and it is correct setup.

Hello, On January 8th 2018 I purchased VOXatc. unfortunately the registration code that was sent to me was wrong. I sent email messages to you on 1/18/18, 1/28/2018, 2/8/2018, 4/4/2018 and after that through PayPal describing my problem and not once did you respond to any of my requests.

First, a disclaimer: I believe this is only marginally related to VoxATC. They symptoms: At one airport only VoxATC AI pilots refer to local traffic as "Army Guard Traffic" They correctly close with the location of the airport, "West Bend Municipal." I have installed MegasceneryEarth photo realistic terrain for many states, including Wisconsin (where West Bend is located) I have also installed Nuvecta Landscapes, which allows for autogenerated buildings, windmills, high tension lines (obstacles), All placed in their real locations (which is pretty cool, making the flat photoreal terrain less boring, It also puts in vegetation) Coincidentally, there is a large area of…

Hi Guys, Been searching for the Setup Wizard in version 7.42 or is it hidden away? ( reference to it appears in the manual still) I have VoxATC installed in C:\Program Files by default maybe I should do a fresh install to C:\Program Files (x86)? If I go to Start\ All Programs\ VoxATC P3D 4 I find the file is "Empty" , was hoping it would have the Wizard there. During installation I used the VoxATC P3D 4 Windows Installer not the Application Set Up, does that make any difference? My system Windows7 64bit, P3D v4.3 with Prosim737 v2.11 Rgds Deefa

Just started getting Fatal Error! After clicking enable. It appears after a few seconds. The error log shows this Log Start 09/01/2018 17:54:58 Object reference not set to an instance of an object. at VoxATCServer.VoxATCServer.SetupDestinationMsa() at VoxATCServer.VoxATCServer.InitVoxAtc() Object reference not set to an instance of an object. at com.intworkings.voxatc.Dispatcher.SetupUserFlightPlanLocationsForRecognizer() at com.intworkings.voxatc.Dispatcher.Run() Log Start 09/01/2018 17:58:32 Object reference not set to an instance of an object. at VoxATCServer.VoxATCServer.SetupDestinationMsa() at VoxATCServer.VoxATCServe…

Hi, I run voxATC ver 7.42 under Windows 10 and P3DV4.4. I have Orbx Global Scenery, Base, Vector and Landclass with REX Airports HD and Orbx ESSA. I also have FlyTampa Copenhagen (EKCH). My navdata is version Airac 1812. I just did a second flight EKCH-EGCC with my PMDG 737 ng and had the same problem in both cases. I was on a Odin 2A departure from runway 04R (Flytampa scenery). VoxATC was up and running and everything seemed to be normal. When I got to CH368, 6000ft. I changed frequency to 119.90 (Kastrup departure) as requested. At CH 371 I was asked to contact Center on 119.42 and got a Fatal Error as a result. I have …

Indexer stops at the very end of 'Processing Facility Data'. Bar is almost full. It is processing the files under FSX/ORBX folder before stopping. I know it's because of some file inconsistency but what should I check?

Hi, all, In need of a little help please. After a lot of mucking around, I have managed to get VoxATC running perfectly on a second networked computer, but have run into one problem ... my 737 yoke and radios all run through the networked computer using Prosim737, and so I need to set the PTT button and the Ident button to work from this second networked computer. In fact I need all the button setting to work from the second computer. In the manual, it says the PTT and Ident buttons need to be on the primary computer where P3D is. Does anyone know a workaround to get at least the PTT button and the Ident button (and possibly all the button settings) workin…

Hallo. I bought the VOX-ATC-tool in the > rcsimulations.co.uk < onlineshop. I got an email with a serialnumber. The activation-process should be done with the tool "VoxATC Registration". Probably the button labelled "Get Registration Code" should solve my problem. Unfortunately klicking this button leads to the rcsimulations-shop-homesite. Nothing about a VoxATC-Registration-Code on this page. It looks like this site becomes redirected. The original-URL is indistinguishable (redirected in milliseconds) Does anybody know where to find the site for calculating the Registration-Code with a valid serialnumber? Or who to activate VoxATC…

Team Many of us have posted elsewhere in the Vox (& P2A) forums about the "interface clash" between Cereproc and Harpo TTS voices whereby they each can be heard alongside others of their brand but not beside (in a mix) with the other brand. The later is often seen as a "fatal error" in Vox and / or no sound is heard. Frustrated that the brands could not provide a "solution", I took the gamble to buy a Nextup Ivonna voice to see how that may perform ..... and not only did I find it worked alongside Cereproc sets, but somehow its install makes Harpo Ivonna's work alongside the same Cerprocs as well as the Nextup Ivonna set. Unfortunately the Nextup I…

When I’m flying my Milviz Beaver (N323KT), Vox calls me as “Silent three two three kilo tango” rather than “De Havilland three two three kilo tango”. I have looked at all the airplan config files I can find and set the call sign on the vehicle selection screen but can’t seem find the right bit to flip to get Vox to use the manufacturer. Can someone point me to the right config file or does Milviz need to fix it? Thanks

Hi I have been using Voxatc for a while now with P3D v4.3 and my PMDG 737-800, no problems at all. But all of a sudden, without any aircrafts around me I get a call from the ATC to change my heading, usually to 180° opposite heading that my route is due to traffic alert on the same flight level. But still, there is no traffic there and it keeps telling me to turn to a new heading. A few times I follow the instruction and that gives me about 40 minut delay and nothing realistic with this task. It hapens in every single flight now!! If I do ignore the instructions it keeps telling me to change my heading but after a while it says "clear of conflict continue direct…

Anyone found when trying to install the above, that the programme doesn't recognise or find your Voxatc version ? Everytime I try to install this UT2 bridge a box comes up saying 'Cant find the voxatc installation ' Thanks Chris

Tried out a relatively simple VFR flight from an uncontrolled airport to a Class C airport. I did not notice anything different. VoxATC still seems to have trouble with fsAerodata. For example: the Unicom frequency and CATF frequency for the airport are both 122.8. The Unicom frequency worked correctly, as did the FSS frequency for opening my flight plan. The CATF, However was 135.475. This is apparently a default frequency in VoxATC similar to 122.2 for Utopia Radio. I was handed off to Madison Approach on the correct frequency well outside of the 20 mile limit (earlier than a pilot would do it in real life). Listening to ATIS is still not required prior to th…

Hi, This is really a question out of curiosity, I'm certain the only fix is for Tegwyn to do his stuff, unless it is a problem with my setup in someway. I have written to him twice about this but no reply as yet. I quite often wish to fly the STAR as detailed on the chart either to carryout a particular approach type or because the approach requires a precise routing due to terrain or other issues. So, I tick the box in the 'No Vectors' option in the Flight Plan Extras. This used to work really well with V6 but I have not been able to get it to work in version 7. What happens is, I am assigned the STAR and then vectored almost immediately. Is anyone el…

I hope that mods will forgive the crossposting but here's a nice video demonstrating rotorcraft VFR flight with VOXATC. It uses the default VoxPop voices so the sound quality isn't the greatest.

Hi Would you recommend this combination. I have an old cycle of FsAerodata that I plan to install but if there will be more headaches than joy I might not. For example when I update my Airports with ADE should I edit the com frequensies or does FSAerodata have its own database that takes priority over anything I edit in the Airport afx files (and if so, does it also handle its own Aproach/departure freq?). In other words does it matter if I update the frequencies if I use FSAerodata Mike