Radar Contact Support Forum

Hi!I found a one post this same problem as I have but no solution...Today I installed the RC to my PC and as try run it as Admistrator I get error:MSCOMCT2.OCX or one of its dependencies not correctly registered: a file is missing or invalid. If I run RC by clicking left mouse button no problem until I try to run Scenery Database: I get error 75My OS is Windows 7 and FS 9.1Any solution?Rolf

As in will it properly vector me around them or does it not even recognize them?

One major problem I've been having with the default ground ATC is when you have two parallel runways, with the outer one for landings and the inner one for take-off. As the planes land on the outer one, they try to get to the terminal, which means they have to cross the inner runway. But if there's a take-off que, they never get clearance to cross the runway, and the traffic gets backed up. I would think that IRL the tower would halt departing traffic for all of thirty seconds for planes to taxi across.Is there any way that this can currently improved? Is there any ground control utility that's like what AI smooth does to approach traffic?Since the upcoming v5 is going to…

Hi,There is only one thing that makes my flights with RC4 not so exicting. Unfortunately, RC allows to contact Tower within 4-6 nm from rnwy threshold only. Unfortunately, this is very short distance especially in those cases where there is a single rnwy in use (such as KDCA). This often results in go-arounds. Is there any way to increase the distance in which user may contact Tower, for example 8-10nm?ThanksDmitriy

Hi folksDid a flight from EGGD/LPFR and back last nightboth times to high to capture the localiser anyone else had this problem.Phil :( :( :(

Hope you are recovering faster from H1N1 so you start working on RC 5 :-).

Has anyone tried these new files from FlightSim:FS2004/FSX MeatWater VocPack for Radar Contact 4 version 2, one of ten parts. By installing these version 2 remastered voice sets, ATC will now sound almost as the prerecorded, real chatter files. All voices now feature a real ATC sound, making RC4 immersive as never before. By Nick Schreger.I assume they are compatiable with FSX and RC4...and are more "professional" sounding.zach

Good Day JDToday I have upgraded FSUIPC to ver 3945, and since then I am getting error 76."RadarContact.FSUIPC.RCV4.code"Can you please adv if I have to revert back to an older version, or is there a way around it.ThanksHani

Hey guys am getting an error with Radar contact.I do get an error"Some errors occurred during analyzing the the Flight Simulator 2004 Scenery. A log file ('AFDcache2004-Log.txt' has been written"So my airports afcad for example Fly Tampa Boston seems incorrect when taxiing.any help would be great.I checked the afcad file and it's the error is all about my Mega scenery California not found. but still my fly Tampa KBOS afcad does not seem right.I have windows 7 64bitAlpha37

I have searched forums for a solution to this, but have not had any success.I am flying from an uncontrolled airport.I request clearance from FSS, I get told to standby, then a crashRuntime error 9RadarContact.fsuipc.rcvcodeI have emailed JD log files as requested

Version 4.40 of MakeRunways isd now available via this link:http://fsuipc.simflight.com/beta/MakeRunways_440.zipI'll try to get it up on the main Schiratti/Dowson page in due course.The main changes are:1. It is, at last, re-structured to have FS9 and FSX scenery structures as its priority -- previously, being a long-standing program operating on BGLs right since FSW95 and FS98 days, it was optimised for those formats, with the FS9 and FSX format files "bolted on" later. The result of this re-structuring is that it is now much much faster scanning FS9 and FSX scenery layers.2. Taking advantage of the increased performance, the FS9/FSX/ESP scenery layers are now scanned tw…

Hello - I'm returning to FSX and Radar Contact after being frustrated with not being able to run FSX at the same detail settings as FS9. Now that I've eventually got a system capable of running FSX with decent settings, can someone please let me know what I need to download to bring RC4 up to the current build/patch state.I have the RC4 CD (brought as soon as it was released) and will of course update FSUIPC and everything else from Pete.I'm asking about RC in particular and if I need to download new builds or patches.Thanks

JD Having been using RC4 for several years, .I re-install on a new PC with win7 64 bit and received yesterday a new key. However am now repeatedly getting " Error 75 radarcontact rcv4 module.atc_ack" messages, and RC4 quits. FSX path C:\program Files(x86)\Microsoft Games\Microsoft Flight Simulator X. Regards.Cees

I've been using RCv4 fine for a while now but recently its been crashing during my flights. Everything will work fine on the ground and departure but in the middle of a flight RC4 will stop responding. RC4 will state an error message of something to the effect that it does not have permission to create a .RCD file in 'C:\Users\(My name)\Documents\Flight Simulator Files' (windows xp)Any ideas?

mwrc4vpv2_part10.zip1-9 are there

I get two errors.When I do not start rc as an administrator (vista 64), I get the error 'IP timed out all entries'. So I did some research and I believe that it can be solved when I run rc as an administrator.So that is what I do: Then the second error comes up: 'component comdlg32.ocx or one of its dependencies not correctly registered: a file is missing or invalid'.So some other research...I downloaded comdlg32.ocx and .dll and put them in the windows\syswow64 folder. I ran cmd as an administrator and typed in regsvr32 comdlg32.ocx... a box told me that it was a succes. But I still can't run rc as an administrator. I know I did well. Fsx is running and my plane is at a …

Hi allUsing Windows XP (SP3), FS2004, FSUIPC 3.93.Having been using RC4 for few years, 100s of flights. However am now repeatedly getting Error 75 messages, and RC4 quits. I've checked other replies on this forum but all refer to Vista etc...Any help on what might be going wrong? Let me know what other information you need, this error happens at different locations, sometimes on ground sometimes in air.ThanksMark

Please be aware that support may be patchy for the next few days. JD has succumbed to swine flu. Those of us who are able to help will do our best but those with registration queries may need to be patient.Thanks.

I did this fine with Vista64 but I just can't seem to make this work in Windows7 64. I downloaded the MSSTDFMT.DLL file and placed it in my SysWOW64 folder and followed the instructions in the sticky but I keep getting a RegSvr32 error stating:"The module "MSSTDFMT.DLL" may not be compatible with the version of windows that you're running. Check if the module is compatible with an x86 (32-bit) or x64 (64-bit) version of regsvr32.exe."It says to ignore the error message but RC keeps giving me the 713 error. Where can I find the right dll? or is it something else?

Hi all,I have purchased the new Eiresim EIDW Dublin 2009, but the airport is not recognized by Radar Contact. I did the scenery rebuild, but no change. My EIDW is installed in its default folder, it means Flight Simulator 9/Eiresim Dublin 2009/EIDW. But installing it elsewhere doesn

I decided to take a spin with RC for the first time after installing windows 7 and Fsx. My issue started when I launch RC, everything seemed ok but when I select 1 or 2 for wx and clearance nothing happens. I was also running trackirv5, ActiveskyX. Please help . Thanks.

I have flown into LPPT (I have Aerosofts version, highly recommended) a number of times, and have oddly never noticed, but the recorded chatter is actually "Brasilian" rather than Portugues, apparently from Curitiba SBBI ATC.I lived in Portugal 18 years: 6 or so within a 10-minute bikeride to LPFR, where I would often hang on to the fencing at the end or RW28 and get blasted with dust and hot, fuel-filled air - and this was a cupla years before I started flightsimming. Currently within sight of short final to SBFZ, and directly under a SID, although I can

Question from a RC-New-bee: I'm flying with FSX and use the Follow-Me-Car from Simflight. Since installing RC4 yesterday, Follow-me is unable to work. Also I can't switch to this dotted line from FSX that show me the way to my gate.

Question to the forum: I'm a pretty heavy user of the PMDG products and have, as a result, grown incredily tired of the lame default FSX ATC. So, I'm toying with adding RC 4. I'm not sure its for me. One of the things I usually do: which is set up a long flight climb to cruise and then walk away until the TOD, and then resume. This seems to possible using "Otto" which is great, but here are some other things I'm looking for as well (and some general questions).1. Approaches/descent speed restrictions. Are they issued? If I had a dollar for everytime the bad FSX issued a go around because of a race for the threshold with another aircraft, I would be very rich.2. S…

Hi All, I've just reinstalled RC4.3 on my new PC with Windows 7 32bits. Everything went fine. However, when I launch RC, load a flight plan and launch it with FX ready, I have a message "IPC timeout". If I launch RC as administrator, it refuses to launch and says that COMDLG32.OCX or one of its dependancies is not registered, although I've donwloaded sevral versions and received successful messsaegs of registration using REGSRV32 in admin mode also. Could someone help me please ? That would be so appreciated ! Cheers, Mat