Radar Contact Support Forum

I landed at EGKK on RWY 26L(FS9 with Gatwick Extreme by Gary summons installed).I was using RC4.3. I exited the runway to the right and taxied slowly.At one point, either Tower or Ground correctly identified my position at E1, one of the runway exit points.I thought RC was not meant to deal with detailed taxi instructions. The only thing it does in this regard is indicate the direction to departure runways in the little RC window.Was I imagining this or what?Eytan

I'm using UT II/FSX and RC 4.3.3845.I'm traning my capabilities on a route from EKYT to EKCH over and over again :-) I just got aware of that I don't hear any AI chatter. I have enabled "AI chatter" and "interact with AI" and seleced all sounds under voices > pilot chatter.Does anyone have some advice ?ThanksEDIT:Sorry, please ignore (delete ?) this topic - it seems to work now...

Hellow fellow simmers. I just bought RC4 a few days ago, and I'm enjoying the new experience immensely - I'm also new to this forum, and hope that someone can help shed light on a problem I'm having. I searched the forum as much as possible, but never found anything that matches my issue. I did Tutorial 1 perfectly, without any glitches. My system specs: Windows XP Home SP3 FSX SP1 Several add-ons (Active Graphics X, LVLD 767, Wilco 737PIC)RC4 - Version 4.3.3845 Intel Core 2 DUO 8400 3.0Ghz 2 GB Ram Nvidia GeForce 9800 GTX+ 512 MB M-Audio SounCard I'm now on Tutorial 2, and I'm stuck on one issue which I can't solve. Initially, I flew this tutorial and…

I purchase RC 4.3 down load but I can not get the file to extract all into another file so I can launch the program. I have tried several times and used up all down loads (can not down load any more, used them all up). I tried using different browsers like Crome, Firefox, and Explorer, but now I can't even find where the files are going. During the 6-7 hour try out I can't even get a simple file to open any more. I sent a nasty e-mail to JP which I was totally in the wrong, and he did respond with a couple of slaps that I deserved, so If some one could help I would greatly be thankful and if JP is on line I would like to extend my apologies. :(

When I run program I get this window ... Run-time error '75': RadarContact.fsuipc.rcv4codeMy system ...Super Hot ... Dell XPS720, with everything.Windows Version Microsoft

The following is the text of a post I have put on the HiFi Simulations forum regarding Active Sky Advanced:-"Last night, halfway through a flight from London Stansted (EGSS) to Zurich (LSZH), on FS9.1 with ASA Build 435 and Radar Contact (RC) 4.3, I had a recurrence of a problem that I thought had been fixed. A message came up behind FS saying "FSUIPC_WAIT cannot change 3xxxxxxxx (a 6 or 7 digit number) it remains as 3xxxxxxxxx (the same number)". This causes RC to stop working and ok ing the message doesn't seem to do much as it comes back after a few seconds. FS does keep running and the flight could continue without ATC from RC. Also, the number that is displayed is no…

I was departing KCLT, number 4 in line and it looked like a jousting match with AI taking off from both ends of the same runway... any one else seen this?

Greetings!I've been using RC v4.3 for quite some time now and haven't had any problems until this week. I'm running FS9 on a WinXP machine.For some reason, the text display window has quit working properly :( What is happening is that I can bring it up with a keyboard command, but can only close it by clicking on "X" in the upper right-hand corner of the window. This only is good for a few seconds and the window will pop up on it's own without any action on my part. So I have to keep clicking on it to close it...most annoying after a short period of time :( Prior to this I could open and close it with the keyboard command...and it would stay closed.I've tried differe…

I have reinstalled Fs Build, Radar Contact and Flight sim fx.After I create a flight plan it does not export it to FSX so it does not show up in my Radar contact program.Any help would be appreciated.Kenny G.

I am a fairly new user. On my most recent flights, ATC gives me a heading, I dial it into autopilot and fly the heading. Then, even though I am flying the heading, it both tells me I am off course (I am not) and then tells me to fly the heading I am already flying, over and over and over again.Sometimes it likes to combine the above with an instruction to fly the heading I'm on (that it doesn't see me on anyway) and to go direct when able even though the heading that I am on is the direct FMC heading.Is it me?

I have a problem with the file atc.dll in FS9.I was on a flight from LIRF to EDDF, and when I landed at EDDF and tuned to the ground frequency 121.70, FS crashed with reporting a fatal error in the file atc.dll.I checked the forum and it seems that this error can happen because of duplicate frequencies in RC4 and default ATC. Also I read that adding the line "RemoveATC=Yes" to FSUIPC.ini should eliminate this error. So, I added this line at the end of the "General" section of FSUIPC.ini and tried again.Today I flew the same flight again (LIRF to EDDF), but unfortunateley, the same error happened again after switching to Ground on 121.70 in EDDF. So this line "RemoveATC=Ye…

Is it possible for RC to issue a ground stop for a arrival airport? I fly to EWR IAH and CLE and they are always having ground delays and ground stops.

There is another thread on another forum where it is being stated that EULA's prevent transfer of software use licenses.I would think this would depend on the vender and their business practice.So I though I would as JD.. is the RC license transferable to a new user?

Dear jd, I had to reinstall my computer and need to activate Radar Contact. But the e-mail address I used during the purchase is not valid anymore. Can I send you the activation request from different e-mail address? Thank you for your reply.

Hi guys,would it be possible to have Gander and Shanwick radio added to the available atc. I know FS doesnt support HF as such but perhaps set a frequency never used by TWR APP GND etc?Would be very cool to leave the NY Center frequency and request NATs etc. Maybe on NAV2 radios?RegardsJames

Hello, im just wondering if i buy from PMDG (747-400X) that i get the 350 page manual or is that just from aerosoft. Im new here so im not that good with the payware products out here.Cheers Alexander Michael

Morning JD well it is morning in Brisie anyway. Justa a quick query please, do you have any idea on how long it takes for delivery to Australia, should i be worried haha or just shut up and be patient, actualy i can do both at the same time even.""Thank you for your recent purchase from JDT LLC. This is just a courtesy follow-up e-mail regarding your purchase on 29-Jul-2009. If you have any questions regarding this order, please refer to the information provided below.As a reminder, if you have paid by credit card, the charge will appear on your statement as DRI*Radar Contact vBest wishes,SWREG Team"

HelloImmediately when i push a button in RC i get a runtime 75 error. If this is somthing that i need to create a log to figure out, could someone give me instructions on how to do that? This is really frustrating

I re-installed after a computer upgrade. I tried to load a FS9 flight plan and got this error msg:Run-time error "6"RadarContact.rc4module.get_departure_informationI tried all the fltplan files I have, they all give me this error. I ran the latest version of makeRwys.exe and no change.I would appreciate any help or guidance to fix this. I never had problems with my previous installation.FS9, Vista64 SP2.ThanksDan

When I made a flight in FS9 with RC 4.3 I recieved a pop up window with the messagefsuipc_wait, can't get D008 to change from 12012435 always 12012435In FS9 I noticed that a passed waypoint was not registered as being reached so I got stuck a that point in the flightplan.Have never seen that before. I also never before have run FS Flight Keeper together with FS. Could that have conflicted?I might also point out that I run both RC and FSFK (and ASA) on a client computer using WideFS.

Hi JD,You help me with my RC4 registration key as recently as July 27th. Don't know if you remember but there was some mixed up with emails. We finally got it resolved but now I need another key. I picked up a virus last week and it took me three days to reinstall everything I had. In any case, I sent a request to the appropriate channel requesting a key and to your personal email address a few days ago and I still haven't received anything. I thought maybe you might be on vacation......the address it's coming from is the islandboy email....Thanks againTroy

Hey all,Please help me, this has had me tearing my hair out. I have just installed RC 4.3 and I have followed the installation instructions. I am running vista 32 bit home. When ever I select start program as admin, I get the aforementioned error (the comdlg32.ocx or one of its other files are missing or not corretly registered etc etc) I have followed the guide shown in the FAQ link however this has had absolutly no affect and I am left very frustrated by all this.Can someone please help??

Run-time error '75';RadarContact.rcv4module.pilot.ack.Hi All,above is a runtime error i keep recieving when wanting to do amost anything withing the User interface for the FSX version, usually when i pick a pilot voice or click on the Start RC button - can't fly with Radar Contact becuase of it, and ideas please chaps, such a superb product its a shame not to use it ?Kind regards, by the way I'm on Vista if thats any help.Piran

Hello everyone, im new to radar contact, just bought it along with the fuisc license yesterday, and it does not work. I load my flight plans, and the rcv4 screen shows up when i start my flight, but i cannot choose any of the options, its as it the buttons don't work. my radios are tuned perfectly, what's going wrong? I've also switched the buttons around and that does nothing. Anyone have any ideas?

I've gone back to FS9 (from FSX) to fly a few flights and RC worked perfectly on the first one. I saved that flight four or five times as it progressed to come back to..worked great, then all of a sudden it stopped saving .rcd files. pressing : will save the flight and weather files, but no .rcd. I tired Ctrl+Shift+:, and the RC window said it was saving it...but it did not. I just finished running a test flight with the debug on, but I can't find the .log file to send you. Where would RC put it?Saving mid flight has always been somewhat hit & miss on FSX. If it didn't save the first time it nearly always did it successfully if I tried again (I learned to check…