The FLY General Discussion Forum

I've been struggling with a paint program in order to add the dc9 center posts. As you can see, they do add a sense of depth to the cockpit. It's hard , however, without a vg knowledge of painting tricks. This centerpost comes from an fs2002 panel which I modified for FLY2. I'll take comments and criticism....for I am not a painter.;-)tony

Hi ,is there the possibility to use scenery of FLY_1 in FLY_2 ?thanks for any help ...Thomas

If I had to choose between upgrading my CPU from a Celeron566 to a pentium 850mhz or upgrading my Nvidia TNT2 32meg video card to a Gforce 64meg to more effectively run Fly 2, which would you suggest?

They increased my frame rates by a whopping 100%!! and in the clouds I am in the 30's. That's a full 10fps from my original drivers. There are two options: quality and performance. I used the performance option. look for them under Nvidia_w9x_omega_14403.exe.tony

Okay when i first installed SB as I am new to the Fly community, it never allowed me to file a flightplan but when i hit resend, an error would come up and crash Fly!II. Then i reinstalled SB and now I don't have transponder and the same problem consists. Anyone have any suggestions?

Hello, I'm just a new Fly2!Guy! after I bought a copy for a bargain at 4.9

Continuing the Carolinas Project, I have uploaded the Winston-Salem render pack - this tile sits just to the east of the Johnson City tile.A special note - there are two anomolies in this scenery caused by elevation issues: the Ashe County airport near Jefferson could not be "flattened" properly by TerraScene - apparently it sits across the borders of some 1/4 tiles; also, there is a small tear in the scenery just east of the Smith Reynolds airport. Once the rest of the Carolinas Project is finished, I'll come back to this tile and see if the Flattenator can be used to fix both areas. If these items bother you, render the scenery without the elevation mesh, though the l…

RandyMuch as I would like to have above on my computer I must confessit is much too complicated for my 88 year brain to comprehend.There for I want to publicly thank Randy forall his attemps tohelp me. I sure would like the Sedona scenery but unless itmore simplfied I assume its not to me.So, Randy Thank you for your [email protected]

I posted this in the Screenshot's Forum. Wanted to share here as well.... Thank you Frank!http://forums.avsim.net/dcboard.php?az=sho..._id=71437&page=Here are a few more Pix I didn't post there....http://forums.avsim.net/user_files/27504.jpghttp://forums.avsim.net/user_files/27505.jpgOne thing, Frank: Why are there 2 buildings on the taxiways? Have I done something incorrectly with regard to installation? On final approach picture, the two buildings lie along the taxiways just to the right of the runway. Thought I'd ask.-DK----David KohlFly! II v2.5.240Dell 8200 P4/1.8G, 1024MB RAM, Nvidia GF4 Ti4600 v44.03, WinXP Home Edition SP1.CH Pro Pedals and Yoke USB.

Anyone know where I can get a copy of the above?Goody

Just stopped by to say Hello to everyone. Haven't been up in fly for almost a month now, lost my video card :(. I have started my check ride prep so I am still getting up in a real 172. Anyway, I am really missing spending eveings flying around in the virtual world. Hope to get back there soon. I purchaed a new laptop so I have to wait to get a new video card, or risk a divorce from the wife. I leave you with a pic I took solo just north of farmville Virginia (FVX).

Hi:Woou you do me a favor and contact me via [email protected]

Randall Roche & Assoc:Anyone have any ideas?????Goody [email protected]

1) Does the Pilatus Autopilot test buttton work?2) Does the altitude capture function work on the Pilatus autopilot?3) If so, how?:-beerchug

I am going to place scenery at the Fort Worth Airport (KFTW), but the 6/27 runway is in the wrong place. Can someone move this runway or tell me how to do it?You can find an airport diagram at:http://www.naco.faa.gov/content/naco/onlin...ams/00159AD.pdf

While still on vacation, I decided I needed to Fly! a little before working on some more scenery. Took a flight into Sedona via Phoenix and the new TerraScene areas. More pics are in the Sceenhot forum: http://forums.avsim.net/dcboard.php?az=sho..._id=72099&page=I wouldn't shoot a long final into Rwy 21 unless in full VFR conditions! http://forums.avsim.com/user_files/28178.jpg

Someone has Fly!2 on his computer again?http://mysite.freeserve.com/fly2theuk/g1.jpgSteve.http://mysite.freeserve.com/fly2theuk/aragon.jpg][/divTHERE'S A BIG WAVE COMING!Whats New!http://mysite.freeserve.com/fly2theuk/fly2theuk/whatsnew.htmMy United Kingdom Scenery.http://library.avsim.net/search.php?CatID=...&Go=Change+Viewhttp://mysite.freeserve.com/fly2theuk/avsim/bart.htm

Has Anyone Read Tom Allenworths Interview ,on Avsim`s front page ?It was Very Interesting I hope everyone will read the WHOLE PAGE....Thanks for your hard work and dedications to this hobby Tom,Go to the fornt page and look for "An Interview with Tom Allensworth "Where would we Be, without this hobby ?Jeff

Directly from the factory production line,Torrance California.3 different versions of the popular Robinson R44.Coming to a helipad near you if I solve some piston engine problems.Experts are welcomed.Thanks to Jarno Deken for these beautiful models.Jan

Recently Windows Automatic Updates recommended the new video card driver update. I naturally thought it would be wise to update but my Dell Inspiron 8200 now doesn't quite function as it should. In FlyII intro screen it lists the Dell 8200 as the video card and even in the computer hardware details Dell 8200 is listed as the card!Also unable to access some of the video card functions.The drivers are also available from Dell so beware of installing the one from Microsoft!Have e-mailed M/Soft and Dell and will try to correct the problem using their recommendations.:-fume

Plenty of ventilation, Easy Access to almost everythingJeffPic

G'day all,I've recently installed a new motherboard and AMD chip into my computer and retained all the old hard drives with all my favourite programs still on them. On boot up all my devices were automatically detected and drivers were found for them so I just kept pressing next until windows 98 SE was satisfied that all was well and I wound up at desk top. My question is this; - on looking at control panelsystemsdevices I notice that for every USB device windows has loadeda USB root directory file anda USB host controllerSee the attacment jpg.Is that correct?? It sure doesn't look right to me. I would have thought that these programs would only need to be loaded onc…

Hi Fly ForumI have released a float version of the staggerwing D-17S in a livery of the 28th Composite Group operating in Alaska circa 1941.Hope you will enjoyed it.Jean

Hi, everyone.Sorry, just a joke. I kind liked that crystal ball remark, brings back some college joke I remembered. Here it goes, I copy

I appear to have a unique problem!!!When I land with ATC guidance and the aircraft touches down I have no brakes. The brakes work fine when I do NOT land with ATC instructions.The brakes don't work with the keyboard or with the CH pedals. The plane eventually stops by inertia - but I may be a long way from the runway.Does no one else have this problem? Is this something that can be tweaked in the fly.ini file? Any ideas?I do have the Final Patch installed.Bill S.