The FLY General Discussion Forum

Hi Folks,Today I finished the exterior.My first twin-engined-repaint , I want it to be special.Next days I am going to do some painting inside.Just a few more days, podding soon.RegardsLeenhttp://forums.avsim.net/user_files/47401.jpghttp://forums.avsim.net/user_files/47402.jpg

Hello. I apologize if I'm not posting in the proper place. However, I was hoping I could receive an answer to the question as to whether it is possible to export 3D geometry from FLY! aircraft files so that tweaking can be done with an external 3D editor. I've seen a lot of discussion regarding terrains/buildings and some discussion about creating aircraft for import into the program. However, I'm wondering if it is possible to export any of the geometry from the stock aircraft.ThanksMark Johnson

... who else, ROTW!!!Check the What's New section in the File Library!Alejandro AmigorenaCheshire, CTFly! II Beta Team MemberAthlon XP 1800ABIT KR7A-RAID768Mb RAMMSI GeForce4 Ti4600 8xAGP 128MBSB Audigy GamerCH Flight Yoke USBCH Pro Pedals USBhttp://www.avsim.com/hangar/fly/dfdg/banneraa.jpg

Hi folks,Did some painting today,Using three TIF`s for MTHP now.RegardsLeenhttp://forums.avsim.net/user_files/47244.jpghttp://forums.avsim.net/user_files/47245.jpghttp://forums.avsim.net/user_files/47246.jpg

As I work and fly this plane , I am amazed at its beauty and performance . Its author did a great job for a beta. I hope to "assemble "it so that we can have another great FLY2 plane.tony

I have not been doing to much with my abition to fly around the world, but I have recently started again. I just compleated my 16th flight! Out of 63 flights total, thats not very far, but four more and I will be all the way across North america!Landed at Toronto Lester B Pearson, Canada, flying from Sault Ste Marie Canada. I ran into a snag during the flight though. My fifteenth leg was a waypoint! I had to scronge around for a navaid to get me close enough to use the neaest feacher on the GPS. It worked allright though, no harm done.

At ROTW, we have several very long projects "on the air". A third aircraft builders group is born and he has decided to realise, for his first creation, an Ultralight plane (ULM): the "Cordouan".This ULM is ready to be achieved (about 2 weeks more): here are some pics.http://fly.simvol.org/images-forum/Cordouan_01.jpghttp://fly.simvol.org/images-forum/Cordouan_02.jpghttp://fly.simvol.org/images-forum/Cordouan_03.jpghttp://fly.simvol.org/images-forum/Cordouan_04.jpg

If down loaded the Long E-Z not too long ago and have discovered a missplaced navigation light. Particularly the one that would be on the tail.My sister thought it looked like Tinkerbell, and I had to agree :-)How would I go about fixing that?Thanks all!

Hope you like the choice.I have been hard at work today for you all. When the Seawind is uploaded I will get to work and pod these repaints for you.1. The finished "SharkBate" Help in designing the paintjob was due to Gill my wife, thankyou darling ;-) http://forums.avsim.net/user_files/46759.jpg2. The "NightStar"http://forums.avsim.net/user_files/46760.jpg3. Second livery for "Harvey Air"http://forums.avsim.net/user_files/46761.jpgAll the very best...Stephenhttp://mysite.freeserve.com/ysomdesign/banner.jpg][/divHomepage now open.

I got the original Fly! and Wilco's 737 for Fly! ages ago but never bothered to look at it until recently. When I did I was dismayed to discover that in exterior view one side of the aircraft (regarless of livery) appears to be covered in a spider's web from nose to tail (more or less) anchored on the wing. Needless to say, this completely spoils the view! Because of this I haven't actually tried to fly the 737 so I don't know if this defect(?) in Wilco's 737 for Fly! has any effect on how it handles in the air (or even if the effect persists once airborn). In any case, has anyone else seen this? Regardless of whether this is a flaw in Wilco's 737 for Fly! or not, is…

Are there any addons to get GPS or the transponder working in this aircraft?

Hi folks,Jarno and Henri made a beautifull Beechcraft.Tony and I did some modifications ,wich resulted in version V6.Now I am prepairing a new outfit for this great bird.This TIF is very difficult to repaint, therefore I used more than onetif and a special acm file . MTHP technology.Repaint just started ,but as always I like to keep you informedand give some repaint stimulation.To be continued.I hope you like it.RegardsLeenhttp://forums.avsim.net/user_files/47061.jpg

Airlines can get their hands on a Concordehttp://www.cnn.com/2003/TECH/ptech/11/04/c...reut/index.htmlremember the old Johnny Cash song "One piece at a time" ?c ya :-waveBart [email protected]://bartsflyplace.tripod.com/bart_logo3.jpg

I am using InfoMETAR 1.01 - great program Ken! :-wave and have discovered a minor bug after changing the clocks back. Lately while downloading current weather, everything appears to be working normally and then I receive an error message about the current METAR cannot be found and to check my system time and time zone. All is correct. Is there a fix for this error, other than downloading directly from the NOAA site and then saving it through InfoMetar to correct the format problems with the text file.Thanks again for a great add on to a fantastic program.Wayne :-rotor

I`m having a problem with the flyhwk on takeoff and in the air. It seems as soon as I am airborne the plane tips to the left no matter if there is wind from any direction or no wind at all. All my expotentials are set at 100%. I even tried setting the airlon trim to favoring the right but it has no effect. Does anyone have any ideas? It only happens with the flyhawk and yes I have Rob Young`s fix applied. Also another problem is at startup when all planes are sitting at SFO I have to go to options "set up axes" and set default button or else I have no control of airlons with my FFDBK joy stick. Could these two problems be related? Any suggestions would be most appreciated…

I thought I would never be able to fly a helicopter, but after destroying a whole bunch I have finally gotten it off the ground and flying around the airport. Now the questions.How do you control the airspeed, I am forever going above 140. Also how to you go from forward movement to a hover.My thanks to all who respond.

Enjoy!tony

Hi there,I've just got Fly II and I've installed all the recommended patches. I have one problem. I can't get the game to work with my joy stick! I'm using a GeForce 5600 FX and I have found the game will only load if I specifiy DX 7 in start up - I don't know if that is stopping my controller working properly or it is something else! Any ideas?

Well, we think we're done refurbishing this lovely B1900 D plane. Sometime today it will be uploaded for your enjoyment. :-)tony

This is my first try to make a scenery from Sydney-Airport. I

I read in a post a while back that You were working on this excellent plane. How is it coming? I know I allways asktoo early about these programing things, but I just love news about planes I am hoping to fly! :)

This is my first try to make a scenery from Sydney-Airport. I

Hi all :-wave Just to let you know I will be uploading the North Wales Scenery shortly. I have had a few other "projects" I needed to finish first ;-) Im just putting the last few bits n pieces together on RAF Mona!http://forums.avsim.net/user_files/46070.jpg Sorry for the delay...Stevehttp://mysite.freeserve.com/ysomdesign/banner.jpg][/div

http://bartsflyplace.tripod.com/katana/AVSIM.jpg c ya :-waveBart [email protected]://bartsflyplace.tripod.com/bart_logo3.jpg

I would just like to thank all those who took part in the count. Im sure not everyone has posted, but no worries we have a good idea who visits here. Remember if your name isnt here yet please add it now :-) Your friend always... Steve Brownhttp://mysite.freeserve.com/ysomdesign/banner.jpg][/div