The FLY General Discussion Forum

Hi FLYers,all things sorted in your FLY! folders? OR several *.ini, *.ren, *.RTR, *.AMP files, not knowing the exact differences? Wishing to analyze two different airplane files, you have unpodded?Then you should have a perfect tool for that! Found it yesterday when looking for some Delphi algorithm.Angus Johnsons gives it as FREEWARE AND SOURCE Code. You mustn't be a programmer at all, get the package TDiff Version 4.0 from Freeware Delphi Components & Utilities by Angus Johnsonhttp://www.users.on.net/johnson/delphi/ When you have downloaded the package "diff.zip" then you will find the sub-zip "TextDiff.zip" included in diff.zip with the COMPILED file and helpfile …

Site viewing at 800X600 screen res.All the best... SteveWebsite is now being updated!!!http://mysite.freeserve.com/ysomdesign/index.html http://mysite.freeserve.com/ysomdesign/banner.jpg

Hi folks,Thanks to Jean Sabatier (ROTW) who made a special AMC/TIF for this livery , I can present to you ,the first pictures of my new project.RegardsLeen( Flybike )de Jager (ROTW)http://forums.avsim.net/user_files/59116.jpghttp://forums.avsim.net/user_files/59118.jpg

Hi all,I have never bothered to map all axes to input devices because I don't have that many anyway. However, the manual explicitly says that one can control the engines of multiengined aircraft together or individually using a single throttle axis (page 11). When looking at the axis mapping utility I find it asking a separate axis for each engine. I can get away mapping "throttle" to my throttle axis which takes care of all engines simultaneousy, but how do I then restrict this axis in-game to say engine 2 only? Or am I getting something wrong here?ThanksChris13

I have the Precision Flight Controls Cirrus II yoke/console plus digital avionics. Does anyone know how to modify FLY II to be able to use this hardware with Fly II?

Just wondering. Did we ever get an answer from TRI as to why the multiplayer server stopped functioning?Andrew Luck18 miles SW EGSH

Dear friends,I have download fast all terrascene of Randall for FLY!II and now I am installing it.I have enought installed successfully 6 scenery ( Sedona, Phoenix, Charlotte, Fontana, Knoxville, Bayboro ) with terrascene and they looks VERY GREAT!!!Many thanks to Randall!!Today I have installed Kitty Hawk but when I go in this area I have error and stop of programm:C3DModel::load - Can't open: DFFA0740.SMFFile SMODEL.CPPLine 3701I have installed 2 file KittyHawk, scf and POD, in kittyhawk-202-155 folder in scenery folder.I make one errors?I thank you in advance for help.With best wishes.Luciano

For those of us who use TerraScene, it is not currently possible to create new USGS-designated scenery unless you already have the USGS geographical data downloaded. For those of you who are using my render packs, this will not be a problem, as I included all the data in the packs. However, all of us are now unable to download new data for new areas, as the USGS site has either been closed down, has technical difficulties, or is being moved.The original home page for the data still exists, but most of the page text is gone, none of the links work, and the FTP locations for the data itself are all gone. This means you cannot generate new scenery with TS unless you already …

Just started this morning, but you get the idea.http://forums.avsim.net/user_files/58417.jpg Rob now you too can go on the vomit comet!I will get the OK to upload and she's yours tomorrow.Stevehttp://mysite.freeserve.com/ysomdesign/index.html http://mysite.freeserve.com/ysomdesign/banner.jpg

http://bartsflyplace.tripod.com/oops/oops.jpg [br] http://bartsflyplace.tripod.com/oops/oops2.jpg [br] http://bartsflyplace.tripod.com/oops/oops3.jpg [br] http://bartsflyplace.tripod.com/oops/oops4.jpg [br] http://bartsflyplace.tripod.com/oops/oops5.jpg [br] http://bartsflyplace.tripod.com/oops/oops9.jpg [br] http://bartsflyplace.tripod.com/oops/oops6.jpg [br] http://bartsflyplace.tripod.com/oops/oops8.jpg [br] http://bartsflyplace.tripod.com/oops/oops7.jpg [br]c ya :-waveBart [email protected]://bartsflyplace.tripod.com/bart_logo3.jpg

Hi. Has anyone else been experiencing problems lately (as of Sat.,Jan.17,2004) while attempting to render a scenery tile with TerraScene 2.1? As the program connects to download data from it's sources such as USGS etc., it repeatedly fails, stating connection failed=java.net.Is this a problem possibly with my own configuration or is perhapsthe site location off-line? Maybe something else?Anyone with any ideas, I'd sure be much obliged. Thanks, dall1w

Just wanted to thank you for all the effort you are putting into the various airports around Kansas. Once apon a time, I terramodeled just about every airport in Kansas was as absoultly much detail as I could. I made flights out to the airports and took dozens of pictures. This was back with TM first busted onto the scene. I never did release them as no one really wants to Fly! in Kansas... :) Since then, I've upgraded my hardware several times and for whatever reason, the Kansas airports never made the move to the new hard drives. So, your work is really appriciated. Thanks bud.Pieter

Hey Guys :-wave I have slipped up and forgot to add a readme file for RAF Valley which I uploaded tonight. :-bang 1. You need the biberall pod installed.2. Put the 3 taxiway files in the data folder3. Put the scenery files in fly2/scenery/united kingdom folderNow go play, once again very sorry. :-outta PS I have made a dirty version of the repaint I did for Rodger our singing fly2 pilot, and a nice girly repaint for his backing singer Jitka.... would you like me to upload them?http://forums.avsim.net/user_files/58371.jpgNow do you forgive me? :-lol Steve Website is now being updated!!!http://mysite.freeserve.com/ysomdesign/index.html http://mysite.freeserve.com/ysomdesign…

Yes it needs to be where we can get this kind of detail in Fly! II then we would have all kinds of users getting fly as their very ownthanks for the test, It made me realize what I had been missingJeffhttp://www.avsim.com/hangar/fly/dfdg/bannernewja.jpg http://www.avsim.com/hangar/fly/dfdg/jeff.jpg

Hi everybodyMaybe somebody can provide some clues? I thought installing FS9 was difficult..! Here we go. I 'need' to put Fly! (ll) on a computer. To start, I've got two sets of software. One reads fly 2k (4 CDs), the other fly!ll (2 CDs). The story: A daughter of a friend will start to learn flying this summer. 'Her' aeroclub has advised use of the before mentioned program as training software. They have a junior program which allows learning to fly gliders (to start) at next to no cost. Besides, wow, I would have loved to have that where I grew up... Anyway, a few freinds and my family are giving a training computer with the following specs (so far): VIA333 mainboard, AM…

Hello Steves, my picture on your webshosted has changed now I have evil grin and more eye see its in all its glory below. I thankyou for putting it up but only you can make it better. I cant smile at people like thats so can you put it up again thanks you Ivor.Ivor

I have been away from forum for some time. Anything new, excluding Terrascene, custom planes, etc., w/ FlyII?What is the update on FlyIII?Thanks,Kline Miller

Did some updating today.Have a look.The Pa 28 repaints and the Cessna-172 repaints coming next days.RegardsLeen

I have been flying a real Piper as of late, and created this checklist of pre-flight, in-flight and emergency procedures. Thought Fly!2 flyers might enjoy when flying ROTW's PA-28, particularly the engine start procedures since most of them will work in the simulated plane.Is anyone interested? If so, I'll post the ZIP to this thread. Let me know.-DK----David KohlFly! II v2.5.240Dell 8200 P4/1.8G, 1024MB RAM, Nvidia GF4 Ti4600 v52.16, WinXP Home Edition SP1.CH Pro Pedals and Yoke USB.

Hi, when import H3 in Python, appears:Traceback (mos recent call last):File "",line 1, in -toplevel-impor H3IdentationError: expected an idented block (H3.py, line 8)Can anybody help me?My H3.py:# Manipulate SRTM-Data# Attention: HGT-Files are big Endian !!!!!!!!def HGT2RAW (inp,op) :# Convert 16bit Raw 1Channel --> 8Bit Raw 3-Channel# Start with H3.HGT2RAW ('C:/Temp/N38W001.hgt','C:/Temp/N38W001.raw')infile = open(inp,'rb') # open hgt-file as inputoutfile = open(op, 'wb') # open raw-file as outputa=0b=0while a != '': # while not EOFa = infile.read(1) # read left Byte of Elevationb = infile.read(1) # read right Byte of Elevationif a == '': # break if nullstring (EOF or…

Please navigate to the NEW & Improved Website From F2FDesignDeveloping High Quality Freeware For Fly! II http://www.f2fdesign.com/ Please Let me know here if there are any problems Loading the pages as I my have, missed somethingJeffhttp://www.avsim.com/hangar/fly/dfdg/bannernewja.jpg

Hi!Yesterday I downloaded the ROTW-PA28 with GPS. Congratulations. The moving Map is really a gem.But it would be nice to have have streets, rivers and roads for Europe (and in my case especially Austria). My idea is to convert shapefiles into the needed ROTW-.dat files. (maybe convert them first with terrashape into Autocad .dxf, which is a plain readable text format and from .dxf into the needed ROTW-Format.)So my Question is: is anybody working on a tool like this ?Harald

that we find on the Hawker and those planes that use it, such as Giorgio's 737. If you want to load the flight plan once you are in flight without having to click "start flight plan" in the flight planning menu, I believe you can do it by following these steps:1. Enter the Fligh Plan screen 2. enter your departure airport and select it.3. enter your arrival airport and select it.4. Now the map should show both departure and destination airports.5. you can "genereta a route"6. you should now have your route displayed on the map7. Instead of clicking "start flight plan", simply exit by clicking on the cross located in the upper right corner of the screen. 8. When you get ba…

Today I uploaded my Austria mesh. It ist made from free available SRTM 3

Or am I just overlooking it!I did find out that the Pilots yoke does turn Right, Left, Slides Backwards & Forward, Even though there is not a cockpit view on the inside it does show up on the outside.Look at the detail of the panel while your Flying on the outside of it, Just hold on to something Huh :) Check out the pics Also I do think we have M$ Beat On effects, Or FX as they call it Sorry Developers did`nt mean to hurt the new addition Cheers to the Hard Workers for making this happen for us, You know who you are :)http://www.avsim.com/hangar/fly/dfdg/bannernewja.jpg