The FLY General Discussion Forum

Lately i'm getting this error while FLY2ing and I can only FLY2 for 30 minutes and this error always occur. Help will be much appreciated.chris_CAhttp://forums.avsim.net/user_files/108959.jpg

Dear Fellow Fly!ers,I just wanted to let you know that F2FD and ROTW have been actively working on Version 2.0 of the Dauphin for the past 6 months.The new version will include the following features/improvements:- SFIM 155D 3-axis automatic pilot system and SFIM CDV85 2-axis coupler which provides 4 pitch axis modes (barometric altitude hold "ALT", airspeed hold "A/S", vertical speed hold "V/S", and automatic capture and tracking of a Glide Slope "G/S") and 4 roll axis modes (selected heading hold "HDG", automatic capture and tracking of a VOR radial "VOR", automatic capture and tracking of a Localizer beam "V/L", and automatic capture and tracking of Localizer Back Cour…

In order to answer fastly, Fly.Simvol has opened a specific forum in english for all ROTW-DVD's users.Go to this address:http://www.simvol.org/forum/viewforum.php?f=38Regards

Waiting for the exit of the scenery Venice, proposes to you an image of the new scenery in realization. Available among brief.Dan

Hi, All.I ran into a problem, I wonder if anyone has any ideas here; I installed the Seneca v.1, and it runs just fine. However, when I try to shut down Fly!II, I get the error message:runtime excption code c0000005 (exception violation) at address 00000015.file winrup.cpp line 152then the program shuts down improperly. Any ideas would sure be appreciated.Thx,Mark

G'day all,At this point in time I have an alpha version of the Jabiru using modified Cessna flight model and systems. As it will be probably a couple of months before I get a panel made for it, if there is anyone who might like to give it a try then email me and I'll send it to [email protected],Roger

After getting my CH Products Throttle Quadrant I have been flying the twins more. I have been spending time learning the King Air again. Last night I was unable to get the thing to a full stall. I tried flaps down, gear down- no go. The stall horn was sounding but all I could get was a gentle nose drop, she would pick up a little air speed and start a slow climb again. I even tried setting the trim 100% up, with full elevator, throttle at idle. Anyone have any ideas?Side note, I found a good resource for King Air info. It is for "the other" sim but a lot of the posts are from real King Air pilots. Have a look see.....http://www.aeroworx.com/forum/index.phpIn their…

Donny AKA ShalomarFly 2 ROCKS!!!In honor of Alejandro's continuing efforts the very first files I installed in the topic "FlyTwoFixes" were his magnetos fixes for the Navaho and Malibu. (Kodiak and Sahara). Unfortuanately they are the ONLY files in that category now, in about a week I will provide links to SeatPositionFix, DefaultAircraftFix (Just 2, it includes 1) BellHsiFix, BellFlightModelFix and others. I will soon be leaving town and my internet connection. If someone wants to make it happen faster they are welcome. I will soon have a bug list on EVERY default aircraft then move to the Addons. I look forward to the day when I have nothing more to say on the subject. …

I have a weird one for ya. Fly2 works great. However I can't fly anywere in the eastern part of North Carolina. If I teleport to ECG, FFA or 9w7 I get a CTD. Anyone have any ideas? I used to be able to fly to First Flight. Not sure how long this problem has been waiting for me. THanks for any help. Log file below.----------------------------------------------------------------Msg: Stream corrupt. Cannot process next tag line [File].File: streamio.cpp line 826Time: Wed Feb 16 21:57:41 2005errno = 2 (No such file or directory)

Hi allIn the ROTW-forum I found a discussion, why non ROTW-add-ons are not included in their DVD.For me it was always perfectly clear that this was mainly a ROTW-product.But if they ever want to include some of my work on an future DVD I would feel honored and they can do so without any further permission from me needed.ROTW, thank you for your hard work to keep FLY!! alive and I am lookin forward for things to come.Harald

Many thanks Daniel for your UK contributions to Fly2. :-) Please give your GF a big thankyou for your time at the puter, from the guys at Avsim Fly3 oops sorry 2 forum.Natwest Tower (London)UK-Eire Map All the best, Steve.My Websitehttp://www.wrexhamspace.orgF2FDesign Websitehttp://www.f2fdesign.com/ My Fileshttp://library.avsim.net/search.php?CatID=...&Go=Change+View http://www.wrexhamspace.org/sig.jpg

I've just received my DVD and soon will be installing. I'm really excited with this new Fly!!, lets say distributionI'll let you know my experience..Thanks for Rotw people again

Did you know Fly3 is available???OK now I have your Attention, go and order the new ROTW DVD.Its blown me away. Easy to install, from a clean installation of Fly2. Some very nice changes and additions to Fly2. France is the place to Fly, I have been missing out.From the Airports, to the Aircraft its pure eye candy.Fly 2 now feels like Fly3OK, as my other post, just one little tip.If you have an older PC, you may need to turn the settings down a bit. My system did some very strange things as all settings where on the max. But this is nothing if you know.Everything else is perfect, and very, very easy for patching and installing.The perfect gift!Thankyou all at ROTWStevehtt…

Here's a link where you may be able to upload some of your creations for others in the sim world to enjoy.http://www.berrygelderblom.nl/modules.php?...iewlink&cid=136They have a section devoted to the simulators and Fly is not represented. Others in the Fly community may be interested in uploading some of their work. Let the world know that we are still around and active.

Hi all,I have found a site where to unload a flight simulator.It is in continuous development but it seems to give good results.To absolutely examine.http://www.flightzone.us/english/home.aspDan

Donny AKA ShalomarFly 2 ROCKS!!!I have thought for a while about doing a virtual polar circumnavigation in a Piper Malibu. The longest required leg looks like Mcmurdo to NZNV, slightly less than two thousand miles. The biggest obstacle is creating a cabin fuel tank. I suppose just increasing the size of the fuel collector would adversly affect CG. Admundsen Station at the South pole has a runway but it is not in Fly 2, I might just land as best I can or just refuel in midair but neither would be realistic. My plane of choice would be the Dragonfly, not cuz I like the paint job (don't) but it performs better. I seem to remember FF being higher, the Sahara may be better aft…

Donny AKA ShalomarFly 2 ROCKS!!!I will not be listing any more bugs on this forum. All my lists are now on the fly wickiweb in fly web "user info".http://flylegacy.dyndns.org/twiki/bin/view/Fly/UserInfoI tested this link, it works:-wave

Hi there,Well, it's just a kind of generic GPS (sort of ROTW_230 if you ever tried it) but not a real one ... nevertheless we installed many real GPS features in it as a moving map, a direct to, a direct to waypoints, a compass page, an engine page informations, the radio tuning etc ...The french version is ready to go and it will be avalaible next week in SIMVOL site (I hope)... I'm finishing the english version that will be avalaible some days later here at AVSIM.The GPS is provided with two gauges that can be installed (easily enough) in any airplane cockpit. The first release version will be with the Malibu ...TJ, the ROTW group and I, we hope you enjoy it ...Cheers,l…

I'm terrascening sanfo area and I always get this bad texture lenght message when fly2 exe almost done slicing the area.Help will be appreciated.chris_CAhttp://forums.avsim.net/user_files/107398.jpg

I am trying to connect two home computers with fly2lan. I currently have a home network in which all computers are connected to the internet via a router which is then connected to a cable modem.Does anyone know how to setup a second computer which uses the router but acts stricly as a client to my computer for fly2lan purposes. My computer uses win xp, while the client pc runs on win98. I am totally lost.tony

Hi allI just uploaded part 4 of my Austrian scenery (the area SE of Vienna).I completly redid the shapefiles I uploaded about a year ago to make this scenery compatible with my other sceneries.I had some problems uploading this scenery, so please let me know via this forum if there is some problem downloading or installing it.Harald

I just found this... will it be possible to somehow read NED or convert NED into readable files?Digital Elevation Model (DEM) and Digital Line Graph (DLG) Distribution DiscontinuedThe tiled, individual Digital Elevation Models (DEM) and Digital Line Graphs (DLG). Data sets will be retired June 30, 2005. These older data sets are being replaced by the current official National Map data for National Elevation Data Set (NED), National Atlas Data Set, and National Hydrography Dataset(NHD). This change is being made to ensure that the best available data is the primary data set distributed to customers. The DEM

Hi, HIMALAYA SRTM ELEVATIONS is finish.This is the area:http://forums.avsim.net/user_files/106637.gifMore pics:http://forums.avsim.net/user_files/106638.gifhttp://forums.avsim.net/user_files/106639.gifhttp://forums.avsim.net/user_files/106640.gifhttp://forums.avsim.net/user_files/106641.gifThis night it

Donny AKA ShalomarFly 2 ROCKS!!!I met someone on Avsim who is interested in trying FLY 2. As a start I would like to let them look over the manual. I thought it was on Avsim but I can't find it in the file library. I tried Iflytri.com and got bounced around a while till I was sent to the godgames server to download the manual but it was down for maintenance. Plus I wonder if the poor guy will be sent to fileplanet to wait for the manual like TRI used to do. Does anyone know the address if the manual is on Avsim? That would be the best way. Thanx!:-wave

Donny AKA ShalomarFly 2 ROCKS!!!Tonite I got really brave and installed acdefaultfix.2, flyhawkfix1.zip, pilatusfix.zip and seat position fix all at the same time. acdefaultfix2 gave me a long list of files I should delete if they still exist. I am new to using Podview, is there any way to look at the entire aircraft folder at once? I went through piecemeal and found a few of the files which brings me to my second question. How do I get rid of those files as per advice? I tried right clicking on them and was told I had selected them but I couldn't figure out how to delete them. My third question is does anyone know what harm is created in leaving those files there? Everyt…