The FLY General Discussion Forum

Is the F2FDesign site OKIts not online?SteveArthttp://stanlow.deviantart.com/

Hope somebody can help, I have just re-installed fly and patched up to date as in FAQ but when the cockpit loads on start up the graphics are well a mess the cockpit itselfe is OK but the outside world is a brownish mesh the smears when i look around, its very difficult to describe!running a abit radeon 9600XT driver 8.172Help would be gratefully accepted.

Greetings,I've flown about 1,500 hrs on Fly!2K (special note, this is a more advanced special edition of Fly! and is not Fly! II, I haven't gotten Fly II yet), and about 9,000 hrs on MS Flight Sim's, but that whole time on Fly!2K on very long flights also, I could not get the GPS Nav to engage. You know how you select the MFD window by selecting shift + m, and you get a transparent window with all of the local airports around you, and the local traffic, plus you'll also see the flight plan course depicted by a line going out of your departure airport, going into your destination airport or way point, then out again to the next airport or way point. How do you get the GP…

G'day all, www.F2FDesign.com is back online.Cheers,Roger

Hi everybody,Just a quick note.... I have just uploaded a couple of scenery files for FLYII. The first is scenery for the airport of Stanthorpe, Queensland, Australia. This package only contains 4 custom models, but hey!! they just isn't a lot at Standthorpe.... download it, you'll see what I mean. The second is STRM data for all of Queensland and a small part of Nth NSW, Australia.I'd like to take this opportunity to show you what has been done on the GA-8 Airvan, which is in progress.(Sorry Tony, I will takle the c310 once I feel I can do the aircraft justice.) ;-)Take take all,Jason

Hello everybody!!I would just like to quickly say to you all that i posted a new plane for FlyII on the avsim server yesterday. I noticed that a few people had already downloaded it even before it could be announced on the front news page.... :-) Good to see a few people still useing FLYII.The plane is a PDQ-3 Ultralight, and while it flies,(for your amusement mostly), please remember it is my first aircraft for FLY.Any feedback throught this fourm, or the email included in the POH, would be appriecated...Take care poeple,Kindest regards,Jason:-)

Hi Guys,When I start to roll and reach 40-50 kts the Nose comes up and the NOSEgear wheel parts from the runway, and while still accelerating down the runway it pitches back down,......but dos'nt quite make contact with the runway again.ANY IDEAS??also, when deciding upon a missed approach, I'm aware that a pre determined altitude is normally set into the MOP as part of the approach/landing checklist, But if anyone knows could you please describe to me the actually procedure a pilot goes through,........................Does he fly manually? or Autopilot?..........does he press any buttons?.................Is this all taken care for by the FMS?.......what speed is norma…

Computer Pilot Magazine has an online feature depicting shots of MSFS in the form of a monthly calendar wallpaper, the idea occured to me, that at least for a wee while we could post one monthly wallpaper too (with fly! shots of course) perhaps a different author every time, showing our fav spots or else just testing our artistic side.with that short thought left on, I bring u my first try at it, maybe it catches on, or maybe it doesnt, but it will certainly add novelty to the cause ;)PS: Should u want the original 1024 x 768 jpg, drop me a line at [email protected], the file is too large to be posted here.Dan

Hi allLooking for a workable piper Meridian panel for 2004, have tried a few 2002 panels but they dont work[gps or some other gauges] I am after a realistic current panel for the meridian. I am using the mike stone updated panel but the grgps500x wont work and crashes fs9.PaulD

G'day all,Thanks to invaluable work by Alejandro Amigorena and Laurent Claudet the Otter is now in the Library in both Mac and PC versions. Unfortunately the Mac version isn't amphibious. We need a Mac programmer who can make dll's. The aircraft is ideally suited for flying around the backwoods. I hope it gives some small pleasure to your simming experience.Just remember Blue is for water and green is for land; if you forget you will go whale watching. :-lolCheers,Roger

can models done through the freeware google sketchup be imported to fly2?just curiouschris_CA

HiCan someone please tell me how I can get ATC to vector me around for multple approaches. After I go missed on an ILS (ALT+M)tower hands me off to approach, and 9 out of 10 times they will give me a visual, and say theres no information avalible, and to contact the tower. This is when the field is at 200 and a 1/2. I would be greatful for any and all help. Thanks Bob D.

Brian Fleet, Head of Manufacturing for Airbus UK presented my wife Gill with a model of the new Airbus A380. And she wont give it to me (cry) http://forums.avsim.net/user_files/150951.jpg She won it and we spent the day at Hawarden Airport, UK. Remember my scenery?http://forums.avsim.net/user_files/150952.jpg I hid the modem... So it dont end up on Ebay (cry)http://forums.avsim.net/user_files/150953.jpg all the best to you all, while I try to prize it off her. I filmed a few things, posting them soon.Steve

Harald,I first downloaded LOAN / LOAN 1.1 which is excellent, thanks.Have downloaded LOABV1.2 and for some reason can't get the models/buildings to appear and the plane 'runs' along the runway vertically with the nose in the runway if I start at LOAB!I have tried to follow your instructions in the read-me text but get confused at No4. I'm running the FlyII generic textures and am not sure which, if any, of the Loan files should be replaced.Approaching LOAB from LOAN I also get the rays of light error which appear to diverge from a single point. If I knew how to do a screenshot I would show you both problems.:-zhelp

Wayne,You just keep on outdoing yourself! KTYS is great! Thanks so much. Now I have a Wayne work of art on both ends of my little adventure from KPDK to KTYS. Wayne, you are an artist, sir.Thanks again,Earl

Can someone send a user guide showing How To Use GPS in Peregrine 800 TR ? Also would like to know how to tune in an ADF signal, and how to set up cabin pressurization for high altitude flight. Any other tips and tricks are welcome. Thanks. My email: [email protected]

Now you can use a sp

Has anyone heard of a 3D Modeling software called ModelPress by a company called Informative Graphics?I was doing a google search and hit this web site. It says its a truely free 3D Modeling application that allows you to export to 3D Studio file format. I believe there is a file conversion utility for FLY! or FLY! II that takes the 3DS and converts to BIN, SMF, or whatever the format for FLY! was/is. That means that more people can get into modeling aircraft, cars, boats, buildings, etc.I admit that I am clueless when it comes to 3D software and animation, and have no clue whether this software will do 'key frames' or allow for animations that FLY! needs to make Contr…

Hello Wanye,I just wanted to say thanks for PDK. It is a very busy and prominent airport here in Atlanta. I just downloaded it and can't wait to try it out.Have a great day all!Earl

Hello guys,I

Hi Team!I get this message when flying in the ROTW amazing french scenery.I fly the beautiful TB10...and about 15-20 min into the flight this message appears.I attached the sit file as a zip file if one of you would like to try this?Kind regards and God blessAlfredMsg: Can't load texture DATAd001167fulltex1.raw: File not foundFile: texture.cpp line 1376Time: Sat May 20 21:32:02 2006errno = 2 (No such file or directory)

I typed in Google "fly!2 pmdg download" and got some interesting results. A "shareware" download org offers both packages downloadable for cash. I did not try it since it is only for PC and I am always little careful but I remember some people here looking for these add-ons so badly that I thought I share my information.

Hi Folks,You will find the new SquawkBox version on Avsim lib (Fly! II miscellanous files ; ID = 85764).A few bug fixes and a few new aircraft AI's to support the last ROTW made aircrafts ;-) - Douglas DC-3 and Socata TB-10 -The Ivao weather server name has been corrected following domain name change (.aero).Enjoy- roland -* ROTW member *

Dear friends, the ROTW is happy to announce you that 5 new half-globe tiles, mainly located in the Italian Alps (from the Mediterranean sea to Switzerland), can be downloaded on Simvol.Just follow this link :http://fly.simvol.org/index.php?telecharge...alpes_sudus.phpThey are "photo-realistic", and they include elevations, and the authors are TJ and Beralex from ROTW.The colorization of the roads and rivers have not been made... so if there are some volunteers to finish the job, they can contact us.However, the landscape is already very interesting, just have a try on it!Happy Fly!ing in the Alps ! :-cool Post-scriptum : I would like to contact Danny Masson, for his Switz…

Hi there all,We just happen to release our TB10 here :http://fly.simvol.org/telechargement_fly2/...agesfr/tb10.php(downloads at the bottom of the page)before we send it to the avsim library this very next days.Enjoy.laurentC (rotw)http://forums.avsim.net/user_files/147659.gif