MS FSX | FSX-SE Forum

Hi there the hot spot for TOGA on ifly 747-400 not working any idea how to solve or any other way for TOGA? PLEASE HELP Thanks Aviv Shefer

I have orbx lights and in day it shows these white squares i have dx10 fixer but i applied all settings but doesnt work.

Hi I got NMG O.R Tambo scenery on my FSX-SE and when I fly there the ground goes all blurry and can not see taxi lines or anything. Part of me thinks it may be my graphics card but just want to make sure. So any help will be great.😉

Hi there I have issue with my add-on airport places. when I select aircraft and choose airport and gate. it always start behind the line an the pushback is behind the the nose wheel can some one Have an idea for that issue? thanks Aviv Shefer

Hello, I don't know if this is the wright place for this topic, but I will give it a shot anyways. My Navighraph data manager does not find any of the fsx SE files when it scans for addons. I tried to locate the fsx SE map manually ionn the manager, but with no succes. Also when I try to install the addon (for example PMDG) munally, it does nothing. My pmdg fmc will still give me the message that the nav data is out of date, and I can't find given STAR's and SID's in the fmc. Please help me with my problem, Noah

Hi guys, was flying yesterday, today turned on pc and all addon scenery has gone from scenery library!? They do seem to be in the fsx folder. Any my ideas how to get them all Barack into library, without reinstalling? Many thanks and best regards, Andrew

when i locked back at the video i took on my turkish airlines flight tk1657, i saw an detail that i had to get my eyes on. It was the wind/vapor effect, that one youtuber achieved! take a look: https://www.youtube.com/watch?v=ZJ54L4khGaw. and i wanted to know what he used. For comparison, this is my real life footage of the a321 landing(wing view): .sorry for all that background talking 😕

*Note; I did post this forum question on Aerosoft's page. I have noticed that the reply time has been very slow.* For the past week, I've had some issues with AES. I was trying to do a flight out of FSDT KLAX the other day. I noticed that AES wasn't working. So I exited FSX. I opened up the AESHelp for FSX. Then I got this message; "Add-on Scenery "FSDreamTeam Los Angeles Int'l" not found or are not active. Please install or activate in the Scenery Library first." I then went into my downloads to see that it was installed. I'm not sure what's going on. May someone please help me figure this out. Thank you in advance. Attracted is the screenshots.

I recently ran into a new problem that I have not encountered, flying the Quality Wings 757. When I switch screens such as navigating to my radio to change frequencies, looking outside, going to the FMS, or whatever.... The screen goes black for a couple of seconds and then everything comes back and seems to run normal until I need to make an alteration, then it goes black for a couple of seconds again. This is one of my favorite payware and it has served me many pleasurable hours except when I run into problems like this. I would appreciate any help if anyone has known or experienced this problem before. Thanks, Dan

Hi everyone. I recently purchased the iFLY FSX 737NG, to tide me over until "THE" NGX is available. On their member forum, I stumbled upon a very helpful list that appears to show the cost index data for a huge variety of airlines. Now, I know that CI is not really set in stone for airlines, and the the pilots often have the flexibility to adjust a SOP value to allow for a faster/slower cruise as appropriate to how far behind/ahead of schedule their flight is, but it's nice to have a template to help you when simulating airliner ops.This info does not belong to iFLY, the forum poster had obtained it from another public website, just to let you know.I hope this is helpfu…

Hi, this is for FSX SP2 boxed only. After almost 5 enjoyable years on a AMD 8600/4GB RAM and a GTX970 under Win7 I decided to get new hardware. So now I have my i7/8700 (HT=on), 16GB RAM, a RTX2070 and a SSD, WIN10 and I'm heavily disapponted. When I start a flight in EDDF with any of PMDG's I'm running out of VAS within seconds. Using the SceneryEditor disconnecting all not needed airports, using all the best practice tweaks it's still not possible to do a flight out of EDDF (Aerosoft's Mega Airport V1 or V2). I'm not using ORBX at all. What makes me wonder is the fact that everything worked well under WIN7. Any hints? Any help? Best Hans

Hi there, I've had an issue for sometime where if i load an aircraft in the North American, South American, Pacific and Atlantic areas, the aircraft wouldn't load properly and VPilot (VATSIM) would not connect however, if I load onto anywhere else in the world, everything is working properly including the aircraft and VPilot. I've searched everywhere to why I can't be able to fly in these areas but can in everywhere else. Does anyone have any clues?

Hello all, I'm new to this forum, and flight-sim in general, so please accept my apologies if I have posted this in the wrong place or am asking something which has already been addressed elsewhere. I am having a problem, shown in the attached video, which is black flickering on my screen whenever I try to use fullscreen mode. This seems to happen at random and I have not been able to resolve the issue through experimenting with the graphics settings. Any help you could offer would be greatly appreciated. I am using Windows 10. Thanks

Shalom and greetings all my pals, Do any of you know where I can find English version or English translation of operating manual book for the FSX model base called PROJET NORATLAS, please? I am unable to keep engines running on ground. Thanks, Aharon

So how does one manage keybindings across multiple controllers in FSX? Do you go through each contorller in the drop down list and add/remove the keybindings you want that one to handle? The key problem I'm trying to solve right now is I've got a Warthog HOTAS, CH Throttle quadrant and a CH Yoke currently plugged in. I'm using the HOTAS for DCS, the throttle quadrant for the P-47 (so many levers...) and wanted to use the CH yoke for FSX GA aircraft, however, the way FSX seem to have set things up by default, among other things, I appear to have multiple axis controlling the mixture, and I'm not entirely sure which ones it has auto-bound. Needless to say, having diffe…

Hello. Does anyone know of a good payware Gulfstream available for FSX? I don't seem to find any anywhere? Thanks!

Does anyone know of any scenery done for this airport? Cast your vote here if you are like me and want to see this airport done!

Hi there, I've had an issue for sometime where if i load an aircraft in the North American, South American, Pacific and Atlantic areas, the aircraft wouldn't load properly and VPilot (VATSIM) would not connect however, if I load onto anywhere else in the world, everything is working properly including the aircraft and VPilot. I've searched everywhere to why I can't be able to fly in these areas but can in everywhere else. Does anyone have any clues? Thank you.

My St. Helena Island (FHSH) airport project is almost done. The entire island is redrawn with correct landclass and SRTM1 (30-meter) mesh, and there is now enough satellite data available, in conjunction with the airport master plan, to properly place the runway. I have also included AI Traffic for the proposed flights to the new airport. I've still had some difficulty nailing down some final details. Placeholder frequencies have been used for the VOR/DME and the offset ILS, and I have not placed the airport NDB airport yet, because I'm not sure if they moved the original FSX NDB or added a new one to the island. If there are any FS pilots that have access to t…

Has anyone out there used the SimLauncher app for FSX and if so is it safe to use?

fsaerodata updates the FSX and P3D database but also updates the airspaces. Is PF3 compatible with fsaerodata? Also, since PF3 uses the FSX database, (updated by fs aerodata), I would like to know if PF3 reads the location and names of the updated airspaces. Thank you

Hello, I am looking for honest and frank assessments from anyone who has used, or who use the PilotEdge software. Thank you in advance. Kind Regards, Gordon

I really love aircraft from the 1920s and the 1930s, however there's a severe lack of high quality payware aircraft from that era. I'd to fly a high quality Ford Trimotor or a Boeing Model 40, but I've found nothing. There's plenty of freeware, but they're all very low quality. 'Golden Age SImulations' produce a lot of those vintage aircraft that I really like, but the virtual cockpit's are all low quality. So far i've only been able to find A2A's Avro 504k + Albatross D.III as well as Aeroplane Heavens Bristol Bulldog. Does anyone know of any high quality payware vintage aircraft? Thank You.

I've noticed that despite adding new scenery, my Scenery.cfg file never changes. Meanwhile, those sceneries are correctly listed in FSX:SE under Settings > Scenery Library... My Scenery.cfg file has a creation date of the last time I installed FSX:SE and it's size has remained the same. I ask if this is normal, because I'm having problems with the fan-made PlanG app recognizing some aerodromes and small airfields that are contained in addon scenery; PlanG reads the Scenery.cfg file when building its database. Note: I'm in the process of posting this very issue in the tasoftware.co.uk (creators of PlanG) forums, but hit a glitch with that website's sendmail system for V…

Well, nobody has answered me in days so I thought I should open a new topic. How do you install automatic installation liveries for the Leonardo MD-82 using the livery manager? I download them and extract them but they don't appear as available in the livery manager. Does anyone know how to install liveries?