MS FSX | FSX-SE Forum

If anyone wants to get the fix for the crashes experienced at the KGSP scenery available at SimMarket then please write to me on shez.ansari at gmail dot com. Also if you want the MK Studios KSNA fix then mention that in the email. Shez

Hi .... I am trying to setup Opus Live Camera in P3D, but the keys that i'm assigning dont work. I can setup the new camera views ok, but cant seem to change view with a key press. I have disabled all the assigned keys in P3D and use FSUIPC Any suggestions would be welcome many Thanks

...when I waited this long to buy the A2A C172. What an airplane! Whoopie...... Doug

I've been happily installing the AIRAC cycles from navigraph into FS commander, without realizing that I have been installing them into the wrong folder with the new installer navigraph offers. So apparently I have missed out on quite a few AIRAC cycles. Whoops, just thought I'd pass the info along to always install into the RIGHT folder. Otherwise you're just wasting a download.

I was looking around but I didn't find anything, maybe someone has had better luck.

Hello Maybe a silly question I managed to assign my joystick and rudders with fsuipc with no problems. I'd like to assign joysticks button 10 to open doors and the trigger button to right ctrl as this is the button I use to transmit to vatsim on squakbox Some help please and thanks in advance.

I'm at my wits end with this issue. I'm hoping someone who is more familiar with the background workings of scenery within FSX can shed some light on this headache causing issue. I installed and uninstalled various sceneries one day trying out new products. It eventually led me to a "invalid Remote scenery path in area.241" error upon FSX startup. Where the head scratching begins for me is when I look at my scenery.cfg's I have nothing near 241 areas, my last entry in the .cfg is area 124, and would never have pushed any higher then 130-140 at any given time. The main issue and I have no idea if this is related to the above is that I no longer see small towns, or…

hello. I was trying to tweak the bbs 330-330 weight and fuel sections in the aircraft.cfg and didnt save the original aircraft.cfg can some paste JUST the [Fuel] and [WEIGHT_AND_BALANCE] section of the 330-300 aircraft.cfg, muchas thankyous

I desperately need help with reinstalling FSX. I followed the uninstall guides, uninstalled all FSX related programs, eliminated all traces of flight simulator from the registry, UAC and anti virus/spyware are off, installing as admin, ran the license reset and the Windows installer clean-up but I am still getting Error 1309. Error reading from file: K:\program files\Microsoft Games\Flight Simulator X\licenses\ client-issuance-ood.Xfm-ms. Verify that the file exists and that you can access it. I can't find anything else to try besides an OS reinstall which would be a BIG, complex deal! It gets all the way through but I get the error before I can enter the produc…

Not seen it mentioned anywhere else.... downloading now . http://www.sibwings.com/

Is there a way to have FSX start w/ a plane and airport vs. the default settings for FSX?

Greetings, Just received and installed my Q400, was unable to install via the autorun as for unknown reasons when I clicked on the "Install" prompt a copy and print routine from my scanner and printer started up. So simply went directly to setup and all appeared to complete normally, however when I subsequently try and run the Control panel app I get the following error message. F:\FSX\SimObjects\Airplanes\mjc8q400\cpan\mjc8cpan.exe The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail. I looked at the event log and think I see the instance but don't really understand th…

Hello, I have owned the blackbox a330 for a few months now and I'm rather happy with it. In a review that I read they stated that the FPS was good, however I get lower FPS than in the NGX and a lot of stutters. For those with good FPS, what settings do you use on the displays etc? Thanks EmilvK

Hello, fellow simmers. I'm from Colombia and it is really hard to get freewares and even paywares of our flag carrier Avianca. Therefore, I've been looking up on Google some repaints for my Simmer's Sky A320. The ones I found are not good, but this one is: http://fsxaibureau.com/manufacturing/airbus/airbus-a320/avianca-a320/ I know repaints don't work in all models but this same website offers this A320 model: http://fsxaibureau.com/manufacturing/airbus/airbus-a320/ After downloading both the repaint and the model, I realize I have forgotten how to put a VC in another model. I would like to get help from you on how to place a VC on the mentioned mo…

I am using Triplehead2go. Does wide view offer any advantages?

Even I selected Clear Weather ( no wind ) . My aircraft still losing airspeed when climbing .

I have a question I'm hoping someone can give me an answer to. Is there a way to split the audio output in FSX to separate the signals going to both my Buttkicker and 5.1 Sound System. Currently I'm using a splitter plugged in my motherboard Legacy Audio Output. Some people suggest buying a Creative Go Pro USB card, but inside the FSX program you have to choose one device for 'voices' for which I use USB headphones for ATC, and one device for 'sound'. Of course my selection is the Legacy Audio. Any help would be greatly appreciated. Scott

Hello. I'm an owner of the Leonardo MD 80. I've noticed that when I program routes into the FMS, the top of descent is placed incredibly close to my destination. This causes my descents to be in excess of 2000ft per minute. This also causes my speed to be very difficult to control. Has anyone else had this issue? How did you deal with it? Thanks, Stephen Hobson

So I have had the ngx for a while now and I am starting to get tired of constantly putting in all the info to start a flight, I wanted to try the save panel feature. I saved it correctly with a name and every thing but when I want to load it it never shows, so I looked in the actual folder in my PMDG folder and it wasn't there either. Am I missing something? It seems as if it is not saving at all. -Max

I have fsx installed with service pack 1 and 2 with the following addons. -REX -PMDG 737 ngx -PMDG 737 Sp1 No EZdok installed. Yep everything legal! I have the UIAutomationCore.dll in the root folder of fsx. and run fsx.exe in compatibility mode with winxp service pack 2 and with "run as administrator" enabled. Now here it comes. Whatever I do.. Really whatever I do my camera is acting weird in virtual cockpit mode. Its like the camera is acting in drunken mode or something. In 2d panel mode everything works fine but the moment I start to accelerate with the aircraft the camera is shaking like hell and the gound goes in blurr mode... See the added picture to …

Hi all Not sure if this is a sim connect problem or not so appologies if it should have gone there I had a perfectly working UT2 until this morning I was playing around with simconnect,trying to get something else to work and as part of that I had to adjust the exe file found in the users, app data, roaming, Microsoft, fsx directory it currently looks like this <?xml version="1.0" encoding="windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>exe.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad>…

Hi everyone, I have an Nvidia graphics card installed (GTX 780) and I recently purchased and installed Rex Essentials w/ Overdrive. I was following a guide to installing and using Nvidia Inspector (http://www.simforums.com/forums/driv...opic36586.html) But when I look at some of the settings I'm asked to change, it looks like things that the Rex program would cover? Am I not understanding something or is there an overlap between what Nvidia Inspector does and what the Rex program does to FSX? Should I even bother using the Nvidia Inspector if I'm going to use Rex? I'd sincerely appreciate some clarification. Thank you very much!

Hi all, not quite sure where to post this one, but as it is FSX related hope it's OK here? I am trying to achieve the following, and wonder if some clever person might have an answer? I own my own 737-800 cockpit. I use a TripleHeadtoGo Unit to give me three screens (using three projectors) coming from a G-force 480 gtx/windows 7 64 bit. Within my cockpit I have a spare small 6" X 4" monitor, which at present is used for the lower engine instrumentation; actually just set up to duplicate the main engines display above. My idea was to try and use this spare monitor for the ATC window within FSX. I plugged in (another spare old monitor) into the second DVi output f…

It is, in FSX. Why? Let's see... I started to learn simple FMC programming in Wilco Airbus Evo. SImplified FMC, so I thought "cool, let's start with something simple, then later to learn programmin it in NGX". But no, even that simple FMC gave me a headache, becuase of few annoying stuff. It uses airac databases (I think), so when I enter departure/arrival airports, and then select a route, I can't use that route in FSCaptain. How in the world I can match FSX Flightplan that FSCaptain uses with airac ones? Also, choosing the runway for takeoff in FMC before the ATC give you one depending on the wind, is pointless. But much more annoying is that you must choose the runway…

Well just one actually and in an American aeroplane! A Carenado Beech Baron B58, registration G-BLKY. Built in 1984, (we've got a recession, can't afford anything newer) she is owned by Kebbell Holdings Ltd of Watford but kept in Guernsey (EGJB) This is her: The pretend one: On AVSIM as and when. Oh and we come in peace. :wink: