MS FSX | FSX-SE Forum

So, just to make things clear for me, you can't update the airbus x extended past version 1.16 without buying the full product again? Is there a discount at least?

Hi guys!, how are you doing? I just bought FSX on Steam, and everything is working ok!, except for EZdok, I can't have it working. The problem is that the Add on menu won't appear on FSX and I get an error if I try to launch it from the tray bar. Anyone else is running the steam version yet? did you guys managed to have EZdok working? Thanks!!

Hi flightsimmers: Happy holidays to all, and just curious to know if anybody is having issues with their payware, such as landing gear up and aircraft floating on ground, no avionics, yoke turned hard left. I thought only PMDG had that issue, but is many more, including ifly and majestic. " I bought these, so don't say, " maybe if you buy it you wont have that issue". On level d, the panel fails to load and it crashes FSX Steam and Capatin sim FMC and MFD are blank. I wanna know if Im doing something wrong or I know what it is....

Hi flightsimmers: Happy holidays to all, and just curious to know if anybody is having issues with their payware, such as landing gear up and aircraft floating on ground, no avionics, yoke turned hard left. I thought only PMDG had that issue, but is many more, including ifly and majestic. " I bought these, so don't say, " maybe if you buy it you wont have that issue". On level d, the panel fails to load and it crashes FSX Steam and Capatin sim FMC and MFD are blank. I wanna know if Im doing something wrong or I know what it is....

I don't usually fly these single prop default planes but I have a lot of time this week so I'm going through my hanger flying everything. This is the strangest thing I have seen in FSX so far. When in outside view the plane and engine appears to fly just fine but when I switch to the VC the engine starts to sputter and the plane jerks/shakes violently. Pitot is on, speed doesn't matter, clear skies with no turbulence. Watching the fuel consumption and the Gs swings wildly in VC but is steady in outside view. Sim is running fine 40fps with no stuttering, it's just the inside of this plane no other plane does it. I have unchecked "engine senses damage" box to see if it m…

Has nayone tried out to install FlyTheMaddog in FSX Steam Edition? I'll tried but in VC all screen and gauges are black and many of clickspots are unclickable. I think there is a problem during installation process, bacause installer look at specific FSX path to write down some files. In P3D v 2.4 some gauges work but on CDU there is a red string indicating the incompatibility, here in FSX-SE all screen are black like there are not correctly inizialized, the situation is a bit different. There is no so many changes in FSX-SE code vs FSX or not? 2D seems to works properly. Thanks for your report.

Simply put, FSX Steam Edition is the answer to your OOM problems. Period! So I know there have been some wild claims about the frame rates that FSX Steam Edition yield. I for one did not have the time to test the two sims at lower settings and configurations so I cannot attest for those results but very reputable folks such as Pete Dawson swear that there are tangible gains. The one thing I have been testing extensively is VAS/WS memory usage and the general stability of the sim. Many of you may have seen my other thread here: http://forum.avsim.net/topic/458260-ms-fsx-vs-dt-fsx-se-the-conclusive-performance-benchmark/ where I did a head to head between MS FSX a…

Hi, I'm on my iPad at the moment and cannot register on the Flight 1 forum, can anyone help me with this product? I tried some flights in default FSX in Alaska, and then installed Flight 1's Ultimate Alaska. I tried one remote strip but it was totally messed up. The default is simply a strip of gravel. The UA version has buildings and a properly located lake (cool!) but all tilted on the side of an airport plateau. What's going on here? Why add these features, but mess it up with an airport that doesn't match the mesh? I have no other scenery installed for this region.

Cannot engage the AP on this aircraft. Got it to work ONCE on Ver. 3.01 (original version). Clicking the AP button does nothing. Also, pressing "Z" does not engage. Everything else works OK, followed Checklist to the letter.Have installed and reinstalled several times. Even tried using the old panel.cfg and SPN.cab with the new version (3.31)Anyone else have this neat little aircraft working ?Dave Hinson

As the title says. Its the last day of qantas 767 service. I flew on on one of the last services today and then the 787. Great day! Came home to replicate my travels and ran into trouble. Im having trouble with the couatl add on manager and i cant fly. Im asking for help although it would be great but i just need to vent. An otherwise special day again ruined by something. I held the 767 throttle in my hand today. If only it was that easy. Thanks for listening Ashley james

As most know, the default ATC can put you too low and sometimes too far out for the approach. Here are some things you can do to make it a little better. When ATC gives you that base vector make sure to decend to 7000 ft. As you get closer in then start down. If the pattern requires a downwind, make sure to maintain 10000 ft. ATC may complain on your altitude, but don't worry about it. Because it will still work. You can maintain within 10 degress of the assigned heading without them complaining. This can get your a little closer in to the FAF. ATC again may tell you to expedite. But just ignore. Hopefully this will help you somewhat, it's helped me a little b…

http://www.simforums.com/forums/topic51089_post317325.html FSX:SE and Prepar3D supported. 1. Support of all versions of a simulator of FSX-Boxed, FSX-Steam Edition, Prepar3D V2.4 (V1 is not suppoted). 2. WorldCamera works in all versions. 3. The mechanism of operation of WorldCamera has changed. 4. Repositioned EZdok cameras in the simulator menu. Now there is no need to launch the configuration utility every time after installation of a new airplane. 5. The configuration utility has changed. It is a version 2.0. Actually starting with the version 1.18 we do a connection to the version 2.0 interface. Version 2.0 is in the works and will likely be a small upgr…

Looking At Getting The IFly 737 or PMDG 737. Which one would you guys recommend and why?

Hello, Whenever I am using FSX Opus (3.51.1) and have DHM enabled, I get extreme stuttering whenever I turn the aircraft or change altitudes. All goes back to smooth when I disabled the DHM. Is there something that I am doing wrong? Thanks

Can we expect this in the near future? Will we have to re-buy?

As the topic says, what are the best seaplanes available for FSX

Hi guys I was flying from Gibraltar to Manchester before and noticed that my sim seems to drop a lot of FPS when landing into MAN but doesn't when departing. Could this be due to Autogen settings or LOD_RADIUS ? http://i.imgur.com/XCbVfwV.jpg Thanks

I would like to wish all the DX9 guys a very merry Christmas from the DX10 guys, wish you where here. Bob

Hmmm can this be true? Aerosoft Forum Post

Hi! I recently reinstalled FSX on my Windows 8.1 64bit rig, but I have a problem with getting ENB series to work. It doesn't appear in game when I press Shift F12. Nothing happens. What could the problem be? Is it possible to change the keyboard input command or something similar? I have tried different ENB settings but none works, however they worked for my friend on his pc.

hello guys, i know this is stupid and i know im probbal doing something wrong, but i need your help! i planned a flight on pfpx, my units of weights are pounds and cross checked this on the pmdg to make sure were using the same measurements. i finished planning the flight and got a zfw of 135.7 and trip fuel for 10.686lbs. i put all this information into the pmdg and my altudite i was given maximum was FL323. I also cheeked the alt given for cruize from pfpx and it was 360, there is the difference. now if i put fl360 into the fmc i get unable cruise alt. i do not seem to know what i am doing wrong, can i have your help please? many thanks

I am an avid REX customer and heard some rumblings about a texture product called 'Soft Clouds'. Is this a viable product and can it actually be purchased and downloaded? Second is it something worthwhile? TIA jja

hi stephen i had a problem: when i update weather the dhm stops working and stay like that until i resart fsiserver. can you fix this problem? thanks in advance

So every now and again, when I play back my recorded video with fs recorder, I can't see my water textures! They are just replaced with my sky textures! For a person who is starting out making videos, it's very frustrating. Any help would be great.

Hey guys, so we now have the good news that PMDG will be releasing their highly anticipated 777 and a makeover of the 747 this summer.. Thats great and I'm sure we'll build up a lot of fun on those aircraft. But having said that, what does everyone speculate that PMDG will release in the future after those projects? Eventually they must think of developing the 787 in due time. But what about re-doing some of the older Boeing aircraft such as the 757 and 767 family. With the NGX now setting the expected " Standard " in the marketplace. I'd say customers would love to get that level of user interaction with the older boeing family. I was just watching this " 757 Light…