MS FSX | FSX-SE Forum

I wonder if there is a tool available to cause the engine indications to be slightly different/assymetrical as in the real world e.g. N1 reading 91,2 left and 92,5 right engine.I would like to have this possibility to use with PIC767 and PSS747, at least ;) Thanks for any hints!

hello,When I turn anisotropic filter to get sharper textures, my ATC text comes hard to read, 43.45 looks better but there is a problem with screen redraws.Any solution to get sharper textures and good texts ???I'm using winXP and GF4ti4200Thanks a lot,Ulisses

Is anybody thinking of buying it. Does anybody know if it comes with a panel or do you have to use their new TACSII Panel or any other 3rd party panel?

Hello, I allows itself to ask you a question, has landing it seems to me that any plane of smoked of the tires appear, since the installation of a file I do not have more anything. How to restore the effects smoked under the tires and which file is it in the repertories effects or fs2002 Thank you very much and by advance for a beginner of FS sorry for my bad EnglishLMO

Hello,I want to use Thomas Kwong's CLK airport together with Flightsoft's HK scenery. Even though I placed the CLK airport at a higher priority, the airport looks as if it's flooded, due to the conflict between these two sceneries. :-( Anyone have a solution?Thanks.Regards,Lee

Do any real GPS displays show the localizer wedges as depicted on the default GPS? I've looked at the Flight-Line Avionics and simulated Garmin 530 but they do not have this handy display for backup to localizer intercepts.

Found myself a sweet deal on a new

IN AITM SOME FLIGHT WILL SAY STAND TIME IS GREATER THAN 1 HOURSFOR END OF FLIGHT FOR INSTANT AT (6 HOURS KPHL-PHILADELPHIA INT'L TOKBFM-MOBILE DOWNTOWN,ALB) DISTANCE 837nmFLYING A B-737 300 AND IF I CHANG IT TO 4 HOURS IT WILL SAY(TOTAL FLIGHT TIME EXCEEDS MAXIMUM ALLOWED TIME OF 4 HOURS)IS THTRE ANY WAY TO SET THIS TO WHERE STAND TIME AT END OF FLIGHT IS LESS THEN (1 HOUR)?OR DO WE JUST HAVE TO LIVE IT?THANKSSAM707

Is there a way to have the spoilers deploy gradually not just ON/OFF using the joystick ofcourse I know you could do it with a mouse...I use CH Flight Sim Joke so the three levers I have I use for 1.Throttle2.Spoilers (but not gradual only works as ON/OFF)3.Reverser (not gradual just FULL ON/OFFI use the CH Manager for it all works fine just if I could make the spoilers deploy gradually...any suggestions?ThanksAndy

I am currently flying KIAD-KMIA in this great a/c at Fl330 and M.74. All goes well. However, on climb to cruise I had a serious speed issue. With 90% fuel, I set climb to average 2000 fpm from ground level using FSNavigator. Above FL200, IAS decayed steadily even though VS was reduced automatically by FSNav as I gained altitude. Commanded climb speed was IAS 270 above 10,000' although the ship never got above IAS 263 at any point and speed decayed to IAS 230 by FL330 which was the cruise alt. N1 never exceeded 92% during climb. I was using AT+AP with FSNav so the SPD function was fully automated.I am surprised with this poor speed performance in climb even given th…

Can anyone reccomend a good ERJ-145 Panel? The ones I have aren't very good..Also I am looking for Project Opensky erj145v7.mdl model file for the ERJ-145 and AVSIM & Flightsim.com don't seem to have it. Or if someone could recommend a replacement that would be fine too.Thanks!Barry

OK,i'm i just beeing paranoid or what??

I think this link will be very interesting for all of you specially for Chris Willis.I don't know why this link does'nt work all the time but it worked for me once and no more, please give it a try to see if someone has better luck.I saved the video in lowbrand, but I think it's not legal to upload it. This a 13 MB file.http://www.microsoft.com/games/flightsimul...owbandwidth.wmvBest RegardsJaime [email protected], Mexico

I know that when you are away from an airport (> 30nm) the ATIS landing runway may be different than the tower landing runway once you get closer to the airport. I think this is because local winds are used to determine the landing runway. However, I slewed to above an airport (KLGA), and ATIS and the tower said different landing runways. Is this expected?Thanks for you help.

I downloaded and installed this program. Read the tutorial. went and found the coordinates for my airport that I want to edit (rivers/roads). I then copy the new cell grid coordinates to the cell grid.txt file and go to drag and drop this onto BGLC.exehmmmm, can't seem to find it, its not in the folder that coastline maker is in....hmmmmm dont see it in FS2K2 folder. So i go download it from simviation, there it is.Now what do i do? Where does bglc.exe go and where does it put files that it compiles? I need to get the bgl to add the grid lines to the scenery so i can start editing, Im at a standstill til I figure this out. There appears to be nothing about it in the readm…

Dear all,When I approached for final at Tashkent (UTTT) airport, FS2002 suddenly crashes and I got the following error message:Appname:fs2002.exe Appver:8.0.0.10919 Modname:unknownModver:0.0.0.0 Offset:404e000The crashes is consistent, that it always occur when the ATC ordered me to turn for final.Can anybody help me address this problem?Thank you in advance.Regards,japangg

What's going on? I've recently upgraded to a P4 2.8 gig, with 1 gig of DDR Ram, an NVidia GeForce 4 128 mb graphic card, SoundBlaster Live 5.1 Player card, 60 gig hard drive, Windows XP and all the other good bits, only to find that I appear to be worse off than with my old system in terms of FS2002. The system hangs and just plays a stupid noise and won't even allow a CTRL/ALT/DELETE.I've disabled the onboard sound in the BIOS, reduced the sound acceleration, defragged, downloaded every imaginable driver, pulled out my hair and even uninstalled every last FS and associated program file! Nothing will fix it. Shall I trash my new machine, or can anyone out there help? …

I am having issues with this plane when it comes to slewing. The plane just takes off like a bat out of hell and I need to crash to reset the situation.I have tried both air files 7372 and N270FL. Does anyone have a solution ???Thanks

I'm looking for a No CD Crack for my FS 2000 being used on Windows XP. Can Anybody help?

Why do i get this from the ATC everytime i request a landing? Is this a standard altitude for approach?...Just curious thanx.=Swiv=

Been much speculation over this?What's the verdict, On or Off?Cheers.Alex.

I've set the atc to 100%, but i want more aircraft.I would prefer them to be dynamic, but i don't mind at all if they are just static.Any ideas how to do this?

Hi Guys! Newbie here. Just wanted to share something I discovered last night with the Baron58. I tried alot of different things trying to get it to fly alittle better and not be so sensitive but couldn't seem to find that sweetspot. I did find something out last night though. On the runway before takeoff, I trimmed up a bit, to the first line below the centerline on the trim indicator. It tookoff VERY realistically. The turns and banks were nowhere near as sensitive along with pitch control. Much more stable overall. It seems getting a good start goes all the way to a good finish or landing. I trimmed down as normal but guess that starting with the said trim settings mean…

I have a GeForce Ti300 and had problems with AA. The cockpits seem to change color all the time. Yea, tried all the different settings but no go so I stopped using it. A few weeks ago my monitor went out so I bought a new 19inch. My old one was a 17inch. I tried using AA again and for some reason it is working with no problems at all. Is it possible a monitor and AA could have an effect on each other to the point of the problem I was having with using AA? Thanks. William

where can i get a good A320 besides the major sites and project airbus? looking for NWA colors...Besides Flightsim.com, avsim, simviation, and PA