MS FSX | FSX-SE Forum

I have just reinstalled FS9 and unfortunately the colors on airports in particular displays a red and erroneous color, check out the following images:1. ENHD Haugesund Karmoy Norway (Norway Airports V9)http://www.jspanels.com/images/FS9_REDTEX_ENHD.jpg2. KCGX Chicago Meigs default FS9http://www.jspanels.com/images/FS9_REDTEX_KCGX.jpgOnly the default textures are used in the FS9Textures and FS9SceneryWorldTextures folders. I would indeed appreciate help on this one!System: MB MSI KT3 Ultra2CPU AMD Athlon XP 2200+Graphics Adapter MSI GF4 Ti4200-TDBest regardsJan H. Sorensenhttp://www.jspanels.com/images/logo_small.gifHomepage: http://www.jspanels.com

Will be released soon....keep waiting

Hi Has anyone updated their copies of aero-softs canary islands and balearics to fs2004 yet ?The reason i ask is that i'd like to do it but was slightly suprised to see that their site states it will cost me 20 euros and my old cd to do so. This contradicts the avsim review of the package that says aero-soft have a free upgrade service. There seemed to be an upgrade serice link on their site but this proved dead.Considering that gary summons charges less than

hiI am looking for a working Boeing 737-200 panel for FS2004 with Steam-Gauges.I have tested and downloaded numerous 737-200 panels but all of them had Richard Probst 732 gauges that didnt work with FS2004 and gave an error message when I loaded the aircraft.I have tried to look for a panel without those gauges with google and other download sites but without any result :(If anyone knows of a good 737-200 with Steam-Gauges and without the Richard Probst gauges please post the link here.thanks in advance, Jani

if you install lots of add on scenery and aircraft will that decrease the performance in fs2004, i know complex sceneries will obviously cause a fps drop, but i'm talking about a general drop, i notice it seems to take a lot longer to load fs2004 now that i have lots of sceneries installed, whats your views? and will 1 gig of ram make much difference in performance? my current system is:athlon xp 2.5 333mhzti 4200 128mb graphics card512 pc 2700 ram.Paul.

I have the tinmouse 737-200 panel. I attempted to add a GPS/NAV switch but it does not hold in the GPS position. Perhaps I missed something, does this panel have one already that I overlooked or can one even be added at all?thanks

Hello, I just bought Flight Sim 2004 (reg box w/ rebate). I am an avid Flight Simmer for decades and have been using TRI Fly!II for the past few years. I have a couple of questions I hope the community might answer for me.I would like to upgrade the land, mesh and textures of Flight Sim 2004 to be photorealistic, what product(s) should I investigate?Also, I've done some homework and I have decided I would like to purchase either "Flight Deck Companion" or "fsHotseat". Does anyone have an opinion on either product?Finally, I would like to know if there is a Pilatus PC-12 available for download (or purchase) for Flight Sim 2004? I had on using Fly!II and it's my favorit…

Markus Brunner wrote a utility (AI Contrail v2 - aicont2.zip @allnodesbusy) which automatically parses all your aircraft cfg files and alters temperature and effects used for contrails. I'm wondering if there's a similar utility to install Nick's Prop Dust Gauge/effect package by Nick Needham (npd.zip @allnodesbusy)? I'd love to have all my AI planes spray in the rain...is that even possible with NPD? Of course, I'll have to revert them all after I see the effect on FPS, but that's another story!Best,sg

Hi all, I should like to use the carriers in "All ArrCab Carriers" as starting/destination airports in my flight plans for FS2002. As for now I can get them only in GPS. Any help very appreciated.

These are really great airports by Daniel Gauthier. I've installed all the extra required files (see below) in the places specified by Daniel, but I still have a few missing textures. Anyone else have the same problem?See imageAlanINSTALLED:ch04-tx1.zipch04-tx2.zipch04-ud1.zipAirport v2.60 TexturesNovaTxt1.zipNovaTxt2.zipNovaTxt3.zipNovav16.zipNovaLib1.zipvodtex30.zipASDv2Textures.ziptxtur202.zip

I'm trying to alter the smoke fx. to more closely represent the very smoky J79 engine. Does anyone know what numbers I need to alter to make it blacker and thicker? Thanks.Russell.

I've installed Marcel Aerni's desert textures to FS9 and they now appear in a seperate "Desert/Forest Texture" folder within the scenery/texture folder. Do I need to get the scenery library to point to them or will they be used automatically? Victor

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=12014

Hi all,for example there is no ATIS at the LIPZ Venice Tessera, neiter at the default nor at the ISD airport.Is it possible to add an atis to that airport and when it is, how?What are good links for airport information like for the current weather or runnway lenght or runnway in use or so.Thanks guys as ever for your help.SincerelyTFT

Hi I have started getting an FS9 Failure, it will either initially hang then Crash or black screen then crash, all error messages show Terrain.dll as the cause.I have read a few previous threads and have tried the fix from Johan (I think) but it has just started happening again.I fly online with VATSIM, so was using FS9, SBrelay, SB, AVC, BA ACARS, Servinfo, weather (either AS2004 of default FS9, doesn't seem to matter)It happened thre times in the last two day, seach time over the North of UK, but not in the same location.Last week I completed a Birmingham (EGBB) to Hamburg (EDHH) online flight twice with no complications.Could anyone suggest a fix please, I would be ver…

Hi,Recently i bought FS2004, but my fsp aren't to good. Airports like EHAM/EGLL with full AI traffic I get 5.2fsp. So this means I will not be flying at EHAM or EGLL. Canyone help me to make fs2004 faster.I have a:P4-1.8MhzASUS P4PE MotherboardGeforce fx5200512mb mem.Thinking to upgrade to a 800kb cache P4 2.8Mhz will this make any change for FS2004.Regards,L.Jim

The forum search util. did not give any good leads on this, but I am sure I have seen it discussed before. I am running Captain Sim 727, 1024*768 (whatever that SVGA res is), 2x AA, 16X AF, ATI Radeon 9500 Pro and 4.3 drivers. The panel gauges are blurry, to the point I have to hover my mouse over them to get see what their setting is. In the C727 tutorial the gauges are very crisp. I am sure they have been on my setup in the past as well (although I can't recall when exactly they changed, so can't back track.) I have played with all sorts of settings, have textures set at massive, and so on, but they do not change.Can someone point out a FAQ or instructions to get t…

Can any member please send me a link or freely available air space charts for Europe. Listenening to ATC in FS2004 instructions re airspace I can't believe they are pukka!!Or are they?

I have taken the lessons, went on and purchased additional hardware and still I end up at times torn 9If you will) between this action and or that action. The best example is the Manual from fs2k (yep the real paper book), and the steps spelled out for the King Air. If you compare them the steps do not follow the same process.I am aware that (I think a year and 1 1?2 ago, so I think) the after market performance products became standard on the Super King, (also a few others but will have to research to be accurate at a latter time)Thus this may have altered the steps say upon app as the new (FS9 world) dose not mention the Yaw Damper, although the prop sink, as well as th…

For some reason all my FS 2k2 cockpit sounds are almost unable to be heard. Have gone to sound directory and made sure nothing has been changed. Engine sounds are fine up seatbelt alt callout etc cant be heard. Any ideas??CheersRottnest

Quick questions, exactly where do land class files go? Should you have a folder for all of them? I've put some of mine in addon scenery/scenery. Is this ok? Do you have to go thru the add scenery steps?Thanks,Mike

Hiya all just want to start a disscussion here not sure if it is the right thread a month ago or so I received a email from a person regarding one of my paints I had mip mapped the textures, why I don

I was wondering how I can install the APU and Air Conditioning sound in all of my airliners. How different are they say from a 737 or a 757 MD-80 etc. etc. I would like to hear this at the terminal as well as when my engines are turned on.

Sorry just need to vent LOL! My computer crashed from a virus I think. I had to wipe out the partition and re-install Windows. I lost EVERYTHING! About 15gigs of flightsim stuff, 10gigs of music, and a bunch of other stuff. I have to start all over. The thing that upsets me is that I was thinking of backing up all my flightsim on a couple of DVDs about a week earlier because my computer was getting alittle querky. Anyways I have to get to work downloading again. Cheers!

Erick Cantu updates to the FFX 737-200 is just what the doctor ordered. This model was deserving of a little more work (textured interior, etc.) and he more than brought this model to FS2k4 standards. I just noticed his updated Southwest model yesterday and didn't realize it was an updated FFX model. I was surprised when I found my old FFX liveries worked with this model. Although I had to add some extra textures from Erick Cantu's model that updated the wing and interior textures, everything else worked. I don't like the angle at which the fuselage sits on the ground (the real bird doesn't site nose down on the runway). If I could find a fix for that it would be gr…