MS FSX | FSX-SE Forum

Hey! When I hold a key down on my keyboard, FS2004 will freeze up. When I release, it goes back to normal. How can this be fixed?ThanksAnthony

With all the SDK's released, has anybody been able to figure out how to adjust the stupid "5 minutes waiting on the ground for departing is too long so we simply make you disappear here at MSFS software development group" stuff? It's rather anoying to be watching a heap of air traffic pile up for takeoff only to periodically see them just start to simply vanish off of the taxiways because MS decided to reduce the wait times from the earlier version...this is as real as it gets? Not.I'm running Ultimate Traffic and it's NOT very realistic to just have planes simply vanish and the others move up to fill in the slot!Thanks for any feedback. I saw numerous complaints about th…

ive been adding traffic and modifying my airports for quiet sometime now. i was wondering if there was any tool or prgram that would allow me to add airport vehaicles to the airports. you like fueling, food, transport. e.t.c

I am looking for a good tutorial on how to use the FS9 GPS system, The FS9 documentation is difficult to understand. It would be great if the tutorials included some practice flights using the various features of the GPS.Thanks for your help!Airbus

Just wanted to express my opinion regarding lack of support from Wilco Publishing (moderator, please do not remove or move this post). I have written E-Mail to Wilco (no reply) and placed messages on their support forum here at AVSim (no reply). All I want to know, our they going to fix Airport 2002 Volume 1 with at least a AFCAD 2 file to properly a-line aircraft at their gate. Most of the AI Aircraft are either half inside the terminals or blocking the taxiways. Also many of their airports are missing taxiways and buildings (LAX and Paris Charles de Gaulle come to mind). I don't care if they fix their new FSNAT technology or not, but please, please fix the aircraft park…

I am having some problems with Eric's A320 panel in FS2004. Let me start by saying that I have read all the FAQ's on Erics site and my problem is not mentioned anywhere. I am running the panel in a IFDG A321. I have had the panel working fine a couple of times now but my problem is something intermitant, sometimes when I load the panel I get a view of the upper panel and the outside view from the cockpit is looking up an the ground is not visable. The kneeboard opens up by itself and the flaps are moving continually by themselves. The spot plane view is circling the plane and I am unable to stop it from rotating. If I try to load another aircraft the same problems are tra…

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...7&topic_id=1440

Last night I was flying and came across this thing. It went up to about 50,000 feet and it seemed to move from west to east, very slowly but it moved. Very strange indeed! Any ideas?ThanksPhilip Olsonhttp://www.precisionmanuals.com/images/forum/supporter.jpghttp://forums.avsim.net/user_files/77089.jpg

Hello,I purchased and downloaded Iron Knuckles and Jet City. After installing these packages, I now have the following problem. When I select an aircraft some of my textures are missing. Not only does it do it with the two programs I purchased from Flight1, it happens ramdomly to my other aircraft as well, sometimes the texture shows up just fine, other times they are GREY .What Happened?BTW: After I had seen this problem, I did a fresh re-install of FS2004. Same problem.Any ideas, has anyone seen this problem?ThanksMike

HiJust want to say Hi and thanks for the AVSIM site. It has been a great resource for a newbie like me.New to FS2004 but not to fltsims in general. Other addictions include IL2 Forgotten Battles.I have added PSS Dash 8 and Airbus 340 to my stable of AC.It will take a while before I master these 2 beauties.Brian

Computer gurus, advice please. Can I put, say, my SCENERY library on one hard disk while FS itself is on another? Changing, of course, all references in the SCENERY.CFG file accordingly?I'm getting horribly short of space on my main disk. With FS2004 and FS2002 on there and three years worth of add-ons, I'm 3 gig short of my 80 gig limit.Mark "Dark Moment" Beaumonthttp://www.swiremariners.com/newlogo.jpg

Hello, I have just downloaded the new FlyBy *.dll, it`s great and easy, place the *.dll to the fs2004 module folderm start fs2004, go to module, activate fly by, set your setting altitude etc. The fly by will appears with the tower view, it`s Freeware!!http://library.avsim.net/esearch.php?DLID=...atID=fs2004utilBestEric

It looks like this, and can anyone tell me what I need to do to normalize the cliffs. the shot is the river adjacent to chelan. I wrote to Holger thinking I might have made a mistake installing his new Cascades terrain mesh, but he told me the area where my problem lies is actually south of his coverage. So, any help or ideas is appreciated as his Holger's excellent scenery.Shermhttp://forums.avsim.net/user_files/77020.jpg

Hay anyone know what happened to Aeroworx? I've tried to check on the upcoming kingair and their site does not come up.Capt.Mac

Hi All.I am thinking of downloading Ken's file, but I wondered if someone could please tell me what exactly it does, and can it really start those ''ended progs'' back up again afterwards, to be honest I wouldn't have a clue on what I should ask F'S Autostart to ''Stop Running'' in the first place,thank you to anyone who takes the time to advise me on this, I realise it might be back to basics for some of you, so fairly simplified should ensure that I follow what you're saying,thanks againSteve.

Is there a way to change the incriment of the spot plane rotational view? That is it's moving at about 20 degrees per inciment and I would like to lower that to a more precise amount. Also if the a change can be made would it also effect the VC view movement?No doubt about it...Ronson2k

Flying over a large area in Northern Quebec (Canada), I found a perfectly square area that is pushed into the earth, although it contains "mesas" with scenery elements. Just go to CYFJ, it is in the middle of this area. (approx 80 nm north of Montreal).The features (such as lakes and airports) float on top of huge plateaus, bounded by steep cliffs. The surrounding areas that don't have these features is all flat and maybe 500' to 600' lower, maybe sea level?At the edge of this area all around is a large perfectly square cliff. Outside of this the other areas are pefectly normal.I disabled all the add-on scenery I had, in case there was some sort of issue that way, didn't …

I would just like to thank personally Mikko Miliniemi, Steven Grant, Ian Grant, Aaron Swindle, Kari Virtanen, Tomas Foosnes, Gerd R. Nehr for the wonderful Maule M7-260 package! It nice to see a well crafted aircraft such as this given to the community for free ;-). Simply a joy to fly and one of the few that is very easy in keeping on the line on TO! I suggest it to anyone who has not had a chance to exprience this wonderful package. You can download and read about it herehttp://www.avsim.com/pages/0204/maule/maule.htm[h4]Best Wishes,Randy J. Smithhttp://www.precisionmanuals.com/images/forum/betaimg.jpgAMD 64 3200+ | ASUS KV8 DELUXE | GFORCE 5700 ULTRA @535/1000 | Maxtor…

the Aeroworx Super King Air B200 looks like it's going to be pretty cool. That would be fun flying into some remote airports that I normally wouldn't get to. billg

Help! I have downloaded a lot off addonscenery in the Alaskan mountains. Instead of using my GPS to find them, I want to add NDB's or VOR's. How can I do this?

I would like to take this opportunity to thank all the freeware and payware designers for their efforts and products for all of us to enjoy. Your talents are only exceeded by my enjoyment.

I'm having problems with aircraft crashing through the taxiways at the end of the runways, is there a fix out there for this? Its annoying to make a sucessuful landing at Madeira only for it to end when your PMDG 738 goes crashing though the tarmac!

I'm not looking for flames or a locked thread, just want other input and opinions. Please keep a level head :)It seems as though certain payware companies spend too much time developing multiple add-ons simultaneously. I can think of a least two major vendors who have 3 or 4 projects going though programming. Wouldn't it make more sense to focus on one project until it's in beta, then move on to another? I suppose this is okay if the team has enough resources to do it, but I'm not sure this is always the case. Some projects never seem to be released.For example, Dreamfleet has a 737-200 and 400, 727, an ATR, and I'm sure I'm missing something.FFS has been working on …

Does anyone know how to stop this message from appearing when I start AFCAD 2.21?http://forums.avsim.net/user_files/76989.jpgI can think of only one really good way....Lee? :-smoochJust jokin' around, of course...Best,sg

Good mornig,here is my problem when I fly on FS2002(on ME)and FS9 (on XP ) at any moment the computer shutdown or freeze and restart. I formated the hard disk installed only important programs, changed my video card but the problems stay there and I don`t know what to do.Somebody could help me ?,ThanksAndre69Intel Pentium 4 1.8 MHZ 512 MB ram, ATI 9600 video card 256 MB and avtually I work mainly with Windows ME and FS2002