MS FSX | FSX-SE Forum

http://store.steampowered.com/sub/85868/ Just the standard with a few bundled addons really :( Cheers Keith

Hello everyone. I have stumbled on a little problem with my sim. When undocking a window(let's say the gps) the fps drops to 1, and it stays the same until i close the window. Has anyone faced this issue before? I couldn't find any info on this, except a post from last year: http://www.flightsim.com/vbfs/showth...-When-Undocked Any help is greatly appriaciated! Thank you!

Hello, I'm 100% sure this is not intended to look like this, but the apron lights on FT airports look somewhat flawed: The orange-ish halo light should not be there. Any ideas? I'm running DX10 btw.

Hello everyone, Having been out of flight simming for several years now, I recently decided to build a new rig specifically for MFSX and get back into it. Basically all scenery (autogen etc) is either blurred or not loading until the aircraft is within 1-2 nm, please see the screenshot. I've tried tests with the sliders in MFSX (including at minimal levels) and I've tried a variety of recommended adjustments to the fsx.cfg file with no changes. My specs are: CPU: I7 6700K GPU: GTX 960 RAM: 8GB Windows 10 & MFSX installed on a SSD Any ideas whats going on and how to fix it? Kind regards

just have been getting error in my flt sim X program on start up 2- days ago error " could not start because can not write FSX .CONFIG " never have had that error my fsx program is about 5 - yrs running with no uninstall / re-install done this error causes my FMC in PMDG 737 not to accept route inputs can anyone explain and help running win-7 , 2 760 ge-force cards , computer set up for flt sim phil hazelton

Sorry, there is no A2A Seneca II, or any GA twin at present, and Lewis at A2A has recently reported: "Sorry no news at present its still the same, we have some early R&D on a Seminole but no active development." https://a2asimulations.com/forum/viewtopic.php?f=23&t=46935&start=15 So... with the Seminole in the far, far distance I've decided to Accusim the Carenado Seneca II and stop waiting :( This is what I did: Accufeel (a no brainer really!) RealEngine 1.2, takes time to tweak, but worth it! Detailed flowlists and checklists Homebuild Piper(ish) Cockpit, with triple-screen and 100% control/instrument interface (no mouse) Buttkicker…

I know this product doesn't officially work in the steam edition but after a google and searching the FSRecorder forums it appears you can "fudge it" by installing v1.331 using a manual method outlined in the supporting documentation. This involves copying recorderfsx.dll to my FSX install and editing dll.xml in \AppData\Roaming\Microsoft\FSX. This is what my entry looks like in dll.xml. <Launch.Addon> <Name>FS Recorder Module</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>Modules\RecorderFSX.dll</Path> When I launch FSX:SE it asks me to trust the file and click ye…

Have the Bahrain scenery in FS9 and installed the scenery in FSX, but I now have a missing building front in FSX. Behind the red English and Arabic letters ( Bahrain Airport ) I do not have the building texture. When I get nearer it is like looking through glass, I also see the green grass which would normally be hidden by the building. When I slew to the sides and back these show up, also apart from some black vehicles behind the airport I rest of the scenery seems to be in order. Something seems to be excluding this small section. Downloaded the files as on the download section, I only have the E_Z libraries installed and not the Jordan airports as I do not need …

Anyone figured out how to setup Trackir 4/5 to run on a client computer? It uses simconnect to communicate with FSX, so it would seem possible. It would be really nice to run Trackir on a client to recoup the frame-rate hit from running it on the FSX computer.I contacted NaturalPoint to see if they had a solution. They indicated no one had asked about this configuration before and wanted feedback if I got it to work.I have tried putting a simconnect.cfg file into the Trackir folder on the client and modifying the simconnect.xml on the FSX computer, setting up a port thru the firewalls of both computer. No joy though. I am using Plan-G on my client it works fine. I a…

Does anyone know how I can get all those buildings to show up on the ground when flying low? I see some but there's alot of empty space in cities, etc. like Los Angeles and Boston. I've seen some videos on Youtube where the scenery looked absolutely incredible and FULL of buildings and stuff. My addons are: - FTX Global Base - FTX Global Vector - FTX OpenLC Europe - Ground Environment X Enhanced - Ultimate Terrain X - USA and Europe I'm also running that "DX10 Fixer by Steve" program. I use Nvidia Inspector and have tweaked the settings based on another DX10 FSX user that has a Youtube video on it. I have 8x super-sampling enabled and 8x anti-aliasin…

Hello. I was wondering if anyone can help with my problems on the CLS 767-200/300 package. After 30 minutes into flight, the FSX-SE program just crashes to desktop. This problem is only with the CLS 767 aircraft. All packages and the FSX-SE are updated to the most recent version. Help please.

29 liveries, most of them built prior to 747-400 SP1 in the flight1 library and even less in the avsim library. Is there a secret stash somewhere else I'm just not finding or are people just not building paints for this bad boy?

Hi All, Is it just me or is there no scenery in FSX? If I position at any UK airport I find myself alone in a world without buildings! I can position at EGKK (Gatwick) on stand 32 which is on the satellite and the picture shows me on an airfield without buildings just taxiways and runways, I do have a tug and a GPU for company but that's it! The same applies if I position at EGTE (Exeter) or any UK airport I have tried. FS2004 on the other hand has a reasonable representation of all these airports, why not FSX? Or have I done something wrong? mog

Hello. I also wanted to touch on the fact that in my FSX-SE program, all CLS aircraft (DC-10 CL and HD, 767) have NO working cabin lights. The texture files are there. I have also installed the packages multiple times correctly and still no working cabin lights. Is this an issue with other users? Albert from CLS was great at trying to assist in this issue however we came to no solution. Please help.

I've installed UT2 on my new computer. It seems ok, but traffic almost all disappears within 5 min. at an airport. My PIC737 Evolution, instrument panel doesn't show any little diamonds during flight. The panel shows green TCAS. When traffic is visible, on the ground, all the liveries are good. FS aircraft set to maximum. Frame rates great. Any ideas on how to keep full traffic there & in the air? i7 670 GTX 970 64bit Pete Sydney Australia

I have been having this problem for a while now, the only addon scenery I use is FlyTampa Sydney. I will add a screenshot to show what happens at all airports. Also I have noticed when I fly near where water is supposed to be the water is actually just like a desert ground texture, has anyone had this problem or know how to fix it? Thanks in advance.

http://www.plane-pics.de/fsxwx/home.htm Lean, clean and tidy from the looks of it. Really gotta test this one. Oh, and it's free!

I'm looking for a scenery upgrade for KBOS but I noticed that FlyTampa doesn't support DX10 which I use. Any other suggestions or is there a work-around? Thanks.

I have been running the FSX boxed/Acceleration version on Windows 7 (64 bit) without issues until today. My rig is built with the i7- 4790K processor, with an Nvidia GTX 770 video card by EVGA. Windows and FSX are installed on separate SSDs. I used the AVSIM Configuration Guide and Nick Needham's Bible to set up and configure FSX and the FSX.cfg file, and NVInspector to adjust the video driver settings. I run GEX and UTX and ORBX PNW regional scenery. Until today, the performance and display quality was flawless. The most recent change to my setup, other than the standard Windows updates, was the installation of a new aircraft, the Beechcraft Bonanza F33A from Ca…

Hello, I am quite new on this forum. I have been flying FSX for a couple of months. I have some problems with my terminal builldings. When I take off with my plane during day time and I arrive during night time, the ground textures dissapear at the arriving airpot. I can only see the jetways but not the terminals. Does anyone knows a fix to this problem? Kind regards and thank you in advance!

i downloaded the Kdtw scenery and by the looks of it the roof is missing and so are the building textures. When looking at the airport roof there is about 1/8 of the silver roof flickering. I am quite confused on this one. I followed the readme instructions to a T. The only thing I can think of is it told me to take two jfk textures and copy and paste them. But I followed everything right. Thanks What the airport should look like: What I am seeing in game:

Hello & help. I have been told you can move the Orbx and aerosoft files from FSX and put them in another drive using mklink/j method, removed the correct files from FSX etc.. Have tried it and cant get it to work. Must be doing something wrong. Can someone explain it to me in simple terms please? Have followed the instructions for using the "cmd" prompt route and typed in the correct paths. No joy. Have tried using Console2 with the same results. Typed it with spaces and without spaces. Using " marks and not. Some things amiss. Pulling my hair out! Bigcav

Hi all, Having an issue with AI aircraft not appearing at add on airports, specifically UK2000 Manchester Birmingham and East Midlands. The AI aircraft appear at standard airports. I've just removed Manchester from the scenery library but even the default airport was empty when I checked it. Any thoughts? ChristoffNY

I have several planes that have the default pitch trim settings way off. The pitch trim is set way too high nose up. I read the excellent thread at http://forums.avsim.net/dcboard.php?az=sho...&topic_id=12256 that discusses the pitch trim problem in great detail, Has anyone figured out a simple way to edit the cfg and / or air files to fix the pitch trim problems? Thanks, regards, Bob.

Good Evening, I'm trying to get my hands on the beta patch released by Majestic that enables compatibility with P3D V3.1 for the PRO edition. On the Majestic website, my former PILOT edition registration will provide me with the 1.018 beta 2 batch for the PILOT edition but it is not cross compatible with the PRO (I tried :(() Having purchased my PRO edition from Just FLight, do I have to wait for them to post the new patch? Do they even post beta patches on Just Flight?? Thanks, Stephen