MS FSX | FSX-SE Forum

Hi, I read about Reshade FX and wanted to try it. But it doesn't work. I followed the instructions in the readme file of Reshade. But when I start the sim an error message appear due to the dxgi.dll. When I remove the files of Reshade everything works fine. I hope somebody can help I have Windows 7 x64 Ultimate SP1; NetFramework 4.6 and the Direct X Runtimes installed. My Graphic card is a NVIDIA Geforce GTX 770.

Just curious which POI program is better, xPOI or FSDiscover and why? Any comments are appreciated.

Hello! I have FSX SE and my graphics are not great to put it like that, but they are not rubbish. I don't know if it has anything with my cpu to do or not, but on my sceneries pretty much everything is like blurry! Specs: GeForce GTX 970 Intel® Core™ I5-6400 CPU @ 2.70 GHZ 16 GB RAM 1920x1080, 60 Hz

I tried to link the profile to my FSX SE and always receive this message "This application executable is already assigned to the following profiles: Microsoft Flight Simulator 10". However, I have uninstalled my FSX Box, and I tried to use any other profiles come with the Nvidia Inspector but still shows the error message. Thanks for help. Nic

Good day.. After my upgrade to P3D v3.2 using the patch upgrade, the Majestic Dash fails to show up in my list of vehicles in P3D. I have attempted several re-installs of the aircraft with the latest Majestic patch. The aircraft is present within the P3D simObjects folder and the Majestic control panel is functional, but no aircraft in my list! Any ideas?

Well I finished what is likely my 5th flight tonight since buying the Dash. I have yet to memorize all the flows and find the different checklists to be perhaps missing things..?? I don't know but the "abbreviated" (5 pages long) checklist from the Majestic forums for use with other add-ons as recommended here leaves out things like arming the emergency lights. Unless I missed it. I went back over all the panels and everything looked good to go. I'm pretty confident that I can go without a check list just by looking at the various panels, but I'll still keep one handy. I might make my own to be honest. The trouble I have so far is the amount of checking, switch …

REX4- Where do I go to find more different thunder sounds.. currently there are only 2 choices.. Would like atleast couple more choices to choose from

Hi I just got EZDOk 1.18 and was wondering what would be a good camera import for the turbo duke. I tried following a YouTube video but something happened and I now have problems and figure it might be easier to not reinvent the wheel.

Does anyone know a good set of values for RND, DHM and CR effect for EZCA? I'd like to obtain a "real" vibration effect during takeoff and landing but seems that deafult values are exaggerated. I need for NGX and MD11, so liners in general. Thanks so much for your suggestion

1st the HGS advisory panel is never lit is there a on off button? 2nd can't seem to get the take off to work. As far as I can tell I have set up according to manual but when I line up on runway I don't see the TO appear in upper right hand corner. I also don't see runway length. I have added all info into HGS control panel. Thanks for help.

Hello All, Does anyone know if Sim Giants support function on their website is still operational? I have filled out a ticket but no response. I have a fully purchased Canary Gold package with serial/registration number and the installer won't work in Windows 7 - but I know from forums within the flightsim community that there is a fix for this from the developer, hence the question. Any help appreciated and I keep my finger crossed that Sim Giants respond in the meantime. Cheers, Nick.

I've got a whole lot of Amazon coins expiring unexpectedly tomorrow...any (polite ) suggestions as to what I could use them for...? Amazon have a lesser range of available apps than Google...I spotted FsRadioPanel, though reviews were poor. There is always Simplates...anyone use it? Cheers Keith

Hi Guys! I want to buy a new Add-On for my Flight Simulator X: Steam Edition. But I don´t know, what is more important. GSX or Active Sky Next. So it´s different but I dont know. Can you help me? Sincerely Mr_Gambler :smile:

Hey! Saw there was a new patch on the User Area of majestic's site. I downloaded it and installed it, but now my HGS screen only displays in red, "HGS". The glass itself is blank. Also, none of the circuit breaker popups are working. is this a bug or a common issue? Thanks

So I went back and read the Facebook release and it said "all" forms of FSX, which should include SE, so I ask the obvious question does it? Because I keep getting a .dll error and it refuses to load no matter how many which ways I try installing it. My question is, am I probably doing something wrong with the install if it is working now in SE?

Been quite some time since last time I was here. Been forever since I had time for FSX but anyway: I have FSX+Acceleration, pretty much all stock except for bits and pieces of panel upgrades. Sim engine is 100% stock and it's staying that way until I can at least afford a better computer, a.k.a I'm stuck with stock for the time being. Now I have a few questions of all sorts. Been searching the web for a few days now but I haven't had any luck so far, for the most part (1 or 2 guys on youtube excepted). Any good lead-you-by-the-hand tutorials, what will take me from from know-nada to got-a-pretty-good-idea, on engine management (throttle, propeller, mixture) fo…

Has anyone else purchased the Airbus Xtreme Prologue A320/321 v0.852, and are you able to get the bird airborne? I have followed the tutorials to the letter; programmed the FCU, started APU and engines OK, setup the TO Config OK, but a number of things just don't work: 1. Spoiler lever is wrong way round. 2. Brakes don't work as they stick on when applied. 3. Aircraft does not turn well when taxiing. Rudders don't appear to operate. 4. On takeoff Aircraft will not climb, either in Selected or Managed Mode Basically, either I am really doing something wrong, but I don't think so, or this version from Blackbox is a pile of cack! Also, they don't answer supp…

I use FSX:SE on a budget, so I cannot stretch to the "ultimate" MD11 that is the PMDG. (one day) The iFDG is a very nice looking model, but it has some quirks, such as running out of fuel with a full centre tank! I was under the newbie impression that fuel usage from all tanks was automatically controlled unless there's functionality on the instrument panel. Is there anyone more knowledgeable who could help? Is the SMS MD11 .air file any better in this regard? Thanks. Mark.

thought I would install FSX-SE. Whats the best go to tweak guide? Does it require the same tweaks as the Box edition or did dovetail already optimize it for more modern hardware? Cheers!

Hello Everyone, My Eaglesoft CX MFD's just wont turn on. Stays blank no matter what I do. I have power switched on but all five are blank. I am pretty sure it is not the aircraft setup. Even if I place the plane on the runway where all systems should be on the displays are blank. Out of desperation I bought current Navigraph FMS data which predictably did't help. Has anyone come across this problem? I run FSX Steam Edition. thanks for your help. Bart

I wonder if anyone might help with adjustment of the contact points for the above aeroplane. As it stands (pun intended!) the trijet sits nicely on the left & right main gears. The nose tyres are slightly below ground level, but the wheel rims are showing. It's the centre gear which is the main culprit! It's a few inches off the tarmac. I've investigated the contact points and understand the theory:- x, y and z values are +ve when forward of, above and to the right of the reference datum (default 0, 0, 0 in this config file). I successfully made the nosewheel sit on the tarmac, but cannot sort out the mains. If I increase the negative value for the centre mai…

Hey Simeon, do you know if you folks are going to hook up with VA to provide an FMC for our mobile devices? Would be a very nice option. Cheers, Rob.

I have this same issue. any help is accepted, i just installed my fsx from iso files, when i opened fsx again, it didn't asked me for a key... weird i have a key. i dont know why. After this fsx runs normally with the same scenery.cfg index i mean with the same unchecked and checked boxes, now trying to install sp1 for the performance it just appears that i should put the disk and then it just says that windows is configuring microsoft flight simulator... and 9 minutes left. After aprox. 10 mins it appears. SP1 did not install succsesfully I HAVE NO CLUE WHY! :mad: By the way, i didn't install fsx in the default root folder, (Program Files x86..) Blah Blah.... I inst…

HI, I decided to reinstall P3D 3.2 and re-downloaded full version of Dash 8 from simmarket. Do I still need to apply 3.2 patchor current simmarket build has all latest patches?

Ok guys, this one has me stumped. After several successful flights in the Dash8 Pro, I lose approx. 75% of my clickspots in the cockpit. No FMS, No bleeds, etc. Only a few of the spots work at all. This events has happened three times so far, and the only fix I could come up with is a reinstall of the Dash8. So I dug a little, and it turns out that when this happens, the following registry errors occur specific to the Dash: Problem Data Registry Key -Obsolete Software Key EFASS HKCU\Software\EFASS -Obsolete Software Key FSiPanel HKCU\Software\EFASS -Obsolete Softw…