MS FSX | FSX-SE Forum

Hi to all, I'm using Microsoft Flight Simulator FSX in Windowed DX10 Mode with VSync enabled using Reshade and I can't get the MSI frame limiter to work with this application. I've read in several posts that MSI afterburner frame limiter works in DX10 FSX. I don't care about the on screen display, i just want the frame limiter to work, that's all. I understand that with the Reshade overlay I have to tick CustomDirect3D Suport in the Rivatuner Statistics FSX profile. However, if I set Detect Application Level to anything higher than "None", then FSX will not start when Afterburner is running with a strange error message 38 saying that the text display device cannot be ini…

I have a logitech g25 steering wheel, which i have converted into a throttle. So when i move the steering wheel to the left or right, it throttles up and down. Now, i was wondering, because the steering wheel has force feedback, would it be possible to sync throttles with for example the autothrottle on the ngx or the 777?

So I've spotted the Orca whales and am motoring into Friday harbor but where on earth is the dock? I have the big green arrow ahead of me but no sign of a dock. Have the Steam folk removed it? Could I have an idea from some helpful soul? Thanks.

Fsx has been in long need of Baltimore scenery. I fly at Southwest virtual (swavirtual.com) and Baltimore is a very major hub, and it is extremly frustrating that a decent version, freeware or payware, has not been made for FSX. The Airport Guys started BWI and postponed it, and have not showed progress in sevral months. The only decent BWI was made for FS2004 by Matthew Perry. I tried it in FSX and it did not work. The default building show over the addon scenery buildings and in some parts of the airport the ground textures cover the taxiway, and the Afcad needs to be updated. It would be highly appreciated for anyone to convert this scenery to FSX.

I recently installed Imaginesims KATL for FSX Acceleration and everything installed correctly but in FSX it seems that the scenery addon is overlapping each other. Double runway lines. Double lights. I looked in the scenery section of FSX and there's only one entry for this addon. Anyone have any suggestions on what's happening here?

Hey Simmers. I recently got back into Realair's piston Duke (V2) and I must say that it's a nicely simulated aircraft; I appreciate the work they have put into it as well as it's fast speed. However, I do notice that the Turbine Duke is way more popular. There are more reviews and discussions on forums. I have the first version which I used a few times a few years ago on my last system. Is version 2 of the Turbine definitely worth upgrading to? And what else would I fly to rival its speed when im duked out - A Pilatus or King Air? . Don't think I can go back to anything to much slower after jumping back in this lol.

Can anyone update the airac-FMC in ifly747 ?

Just getting back in to FSX after a few months in hiding. My first purchase since being back was ActiveSky Next. Would it be worth the upgrade to REX4 over REX E + OD as far as textures are concerned and also in regard to how well it plays with ASNEXT? I'm running in DX10.

Finally a developer is working on slc airport. Is someone doing a pdx payware high quality for fsx/p3d?

Hi to all readers, Can anyone help me with a problem I have had ever since installing the PMDG 747 -400. I am only a starter in this level, so please be patient. My problem is that the arrow of my mouse (on the screen) stutters all the time, and it is becoming both annoying and worrying. Is this a known problem? If so, can anyone tell me how to make the arrow settle down into the sedentary arrow it used to be before tackling such intricate aircraft? There is another question I have but I not too sure whether I can ask tow questions at the same time. Nevertheless, I shall ask and if I am totally wrong, please let me know. The question is, Since the first edi…

I use a TrackIr. The default view, on lets say, 172 isn't quite right. I know there is a value in the aircraft cfg file that can be changed. What is the value that must be changed and is there any good value that anyone can suggest?

I'm hoping someone can help me out. I've run FSX for a long time, but haven't done much multiplayer. I played with 2 friends via gamespy a number of years ago, and we had a pretty good time. Wanting to play again, I set up an extra machine as an independent server... made sure the firewall and router settings were set up correctly as well. I am in Northern Virginia, one of my friends is 20 minutes away, and the other lives in San Diego. The friend who lives 20 minutes away was able to connect to my server just fine via IP direct connect, but the friend in San Diego wasn't able to connect at all. He did multiple restarts, and even restarted his router too. W…

Geez the PMDG 747 has gone up in price! http://www.precisionmanuals.com/ProductCart/pc/viewCategories.asp?idCategory=13 Glad I picked it up a few years back when it was under $200 Million Cheers,

Hi Does anyone know a way to convert the Navigraph charts to PDF, I have cutepdf but I want to download the whole bacth of certain airport, unfortunately if I choose to print I have to do each chart one by one which will take forever. I am suing desktop Navigraph Chart 5, all I want to do is select for example EGLL all the STARS and SIDS in one go and convert to PDF Many thanks J. Roberts

I just finished a flight with a friend hosting a multiplayer session. We both were flying PMDG 737 aircraft and both running Active Sky (same version). We were flying from PAFA to PAJN. He was seeing scenery with snow coming down and I was only seeing Clouds. We both thought that we should be seeing the same type of weather as I was flying in a session set up by him. I believe that the wind directions were also different. Does any one have any idea why this was happening?

Is there anyway to bind VNAV switch? I looked through all the controls and I didn't find it. Can you help guys?

Working some issues related to troubleshooting PFC throttle quadrant so I deleted FSX.cfg and restarted...re-tweaked etc. My question is, do I need to reinstall/re-run addons like FTX global, ultimate terrain, and REX or are those settings unaffected by deleting/rebuilding FSX.cfg? Thanks in advance. Mudhen

I have FSX / Accelerator and FSUIPC 4 ( version 4.9.4.9 ).There are updates listed below for those who are interested. With what I'm using which ones should I download ? Posted 12 February 2016 - 05:54 PM Note that mostly this Announcement will contain only the changed modules. You will almost always need the main release installed first. For those please go to http://www.schiratti.com/dowson The FS modules here, when supplied without Installer, need copying into the FS modules folder once extracted. Please note the format here. The links for all the updates are listed first. For interim releases only, notes about changes are listed separately, below. Install com…

Slight delay..... As there appears to an issue with the link.... My apologies for the hiccup... But we should have it up as soon as the issue is resolved. Simeon

Hello, Maybe someone can help me with this problem. I have been unable to use EZdok since trying to run the new 1.18.7 version. The V 1.15 with the 1.17 update ran fine for me in the past. So I download the exe and run it in administrator and everything seems to load fine. And I run the EZCA config.exe tool like it says but every time I start FSX I keep getting this message: ''Application can not run. First start configure tool for registered components.'' I have performed the options configure FSX files registry and unregistry components plus conflicting hotkeys and still no go. I have the config.exe desktop shortcut permanently to admin. I have run the r…

Sorry to bring up an old thread but I am using simplecam and would luv to have the camera effects in ezdok and use simple cam number pad assignments - let me explain why With simple cam if I hit a key to an assigned view works great I can instantly pan with the hat switch and all is normal again so its a seamless interaction - I could not get ezdok to do this - you try to pan and its stuck - have tried many times and posted in ezdok forums but could not get it to work Any help would be MUCH appreciated as accu-feel is not cutting it on that feeling of floating - simply nothing compares and I doubt Sim Physics compares either Thank you

I am wondering what setting I need to change that will effect how close I have to be for objects to sharpen up. Right now I have to be right next to a mountain or right above the ground for objects to clear up.

Hi all I have been using the Q400 on FSX: SE and recently switched over to P3D. I am curious if I can just install the Q400 again onto P3D or if I should un-install the FSX version first. Thanks very much! gad

is an actual patch in work? The Q400 works well in 3.2, but this warnig is not great.

Does anyone have a link to any topic or advice on how to get it to work with FSX:SE? Been trying to search this forum and the results are just what I see when I just open this forum. I don't know why, I type Ultimate Traffic into the white search box in the upper right and it acts like I just refreshed the page. Very weird. I installed it and everything seems to be where it's supposed to be, but no airplanes show up in FSX:SE. Can't figure out what I'm doing wrong and I'm getting frustrated. Either that or is there a better option out there for traffic that doesn't require all this messing around? Thanks