MS FSX | FSX-SE Forum

Hi all,Just receieved the CH throttle quadrant. For those who have this and the Aeroworx KingAir, what do you have mapped to the switches? Thanks!

Hello everyone, I have been having CTD's and now I get the blue screen of death on my Win2000pro system. When this happens, It also says a memory dump has been completed. All of a sudden this has happened everytime on exiting FS9 since yesterday. Also this morning my keyboard was not being seen on bootup, then the next hour on bootup, I got the system hardware unplug device on the taskbar for usb devices. I also got a FSUIPC not accredited message while in the Majestic Dash8 out of nowhere. I don't know what is going on here.My whole system is going crazy out of nowhere!!! All of a sudden the past week since I installed the TNCM scenery and uninstalled it this started hap…

Hi, does anyone know how many seconds it take a 737 to extend full flap and how many seconds it takes for the leading edge slats to deploy? Is there a website that has those kind of specs?Thanks,Bill

I was flying into KPHX and looked up ATIS on my terminal charts. ATIS showed a frequency of 127.575. I tuned it and nothing happened! After I landed I loaded another flight and checked it again and it is 121.20 in FS9. I think the latest terminal procedures show it to have changed to 127.575. How can this be changed in FS9?Thanks!Airbus

Hello folksHere is the dealI got planes with GPWS and others without.I would like to know if I can simply include the GPWS gauge in the panels of the aircraft that do not have one or every GPWS is tuned for a specific plane??? For example, when the GPWS gives you the warning "sink rate", such warning is triggered differently depending on the plane???What I mean is that 2000 fpm is the norm for an airliner but maybe not in a Cessna!!!The "pull up" warning I thing is triggered simply by the distance from the ground so it should not be specific from plane to plane Thank you in advance!!!Regards

(Dear Moderators, I hope you can leave this here for a day or two because this is about the only Forum I visit nowadays. Thanks.)On August 10, at about this time of the evening (9 PM CDT), I began to experience chest pain and shortness of breath. My wife drove me to the hospital and, sure enough, I was having a mild heart attack. Four bypasses and 12 days later I got back home and I'm doing well, thanks to the great doctors, nurses and staff at San Antonio's Methodist Heart Hospital.Today I tried simming for the first time and all is well. My wife reminded me that I was supposed to keep my legs elevated while sitting but I told her that exercise was important too. I …

I am sure this question has been asked before but I have not been able to find an answer doing a search.I am looking at installing Ultimate Traffic for commercial AI traffic and GA-Traffic for the GA type traffic.Do I still need to have Airline and General Aviation traffic selected in FS9? I know that I need to still set the Air Traffic Density but wasn't sure about these two other options.Thanks in advance.

For those like me who have been waiting along time for a new EHAM for FS9 just checked the Cloud9 site and i am downloading now.Looking forward to this one.DArren

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=21415

Hello folksHere is the dealI got planes with GPWS and others without.I would like to know if I can simply include the GPWS gauge in the panels of the aircraft that do not have one or every GPWS is tuned for a specific plane??? For example, when the GPWS gives you the warning "sink rate", such warning is triggered differently depending on the plane???What I mean is that 2000 fpm is the norm for an airliner but maybe not in a Cessna!!!The "pull up" warning I thing is triggered simply by the distance from the ground so it should not be specific from plane to plane Thank you in advance!!!Regards

HiThis may be a duplicate post Cannot find the original. ApologiesAuthors of Terrain mesh appear to suggest different procedures for installing Mesh1. Place in FS9/Addon Scenery and activate in Scenery Library/Add Area 2. Place bgl file in FS9/Addon Scenery/scenery No further action3. Place .bgl file in FS9/Scenery/World/SceneryDo all these have same end effect? Is there a preferred method?Regards Roy

In a couple of weeks I will be getting a new rig. I was wondering whether there is a way to move my addons from the old to the new computer without having to reinstall everything. ricardo

Hey guys is there a limit on how many purchases one can make with flight1's wrapper? Example, I downloaded both UT:USA and Cirrus SR20G2...I proceeded with the UT purchase no problems (as usual). After it was installed and everything was finished. I proceeded to purchase the Cirrus SR20G2 everthing was fine util during the authorizing portion I get a message that says " card used too recently"(which was true)I'd just made a purchase of the UT. From an ecommerce perspective this is a good thing to have, to catch multiple purchases of the same product, but these are two different products. They do use the same wrapper though. So do we have to wait a day or a few hours to bu…

Just installed what I expect to be a fantastic program. I have it along side the Taxi Speed Editor..Could somebody tell me what setting you are using?I am using the default settings and now, when I am sitting beside the runway "plane spotting/watching", the incoming approaches act as if they are on a roller coaster, up and down, then dive bomb for the runway, sometimes making there own missed approaches because they are landing so long. "I HAVE AI RESPONDS TO USER PLANES" UNCHECKED.Help anyone?ThanksDarryl

Im one of those folks who thinks "well enough should be left alone"Im bad about not reading before I jump in the fire. I really didnt see any imformation on the RXP site as what would happen when I upgraded my Flight Line Apollo avionics to the 2005 version. The Jetline 2 and 4 as well as the WX Radar still work properly but the Apollo sytem has trashed all of my panels so to speak. I do not like using the pop up menus to launch and view the Instruments so I did custom installations to many panels of some are all of these avionics. Well the upgrade wont support these, It requires you to use the Avionics the way RXP sees fit or at lest it seems that way. Heck I cant even …

Citate press release :"Dear Sir/Madam,Our News:-------Captain Sim is pleased to announce that the successive beta testing stage of the 'Legendary Herk' expansion for MSFS 2004 is over. Highly professional Beta team reports that the C-130 overall impression is VERY positive, some of them call it 'awesome piece of art!' - 'the Visual Model is fantastic and the level of systems detail when completed will be unparalleled, texturing appears superb, the flight model is very realistic - the airplane is very nice to fly and easy to handle with no bad habits'.However there are several issues that still need fixing. We keep doing our best to polish everything up and release Beta 2 …

Hi: I just downloaded and installed the Enviro program from Avsim. I split my time flying between Ireland/UK half the time and various Southwestern US cities the rest of the time. Avsim had a lot of UK ATC files for Enviro which I installed and use-but I can't seem to find any ATC files for the Southwestern US..Does anyone know if any exist that I could download? Thanks! Bill

HI there,if i set my local time (northern Italy +1) in FSworldtime & season menu i can see that UTC is 2 hours early and not 1 hour as supposed to be.Can anyone please explain?Thanks in advanceLuigi ;-)

Hi all, I use FS2002 soley for "ai spotting" and was just wondering if there is a way to assign the natural "spot view" sounds (which are a lot louder), in the "virtual cockpit" view?I use the VC view with no panel as it gives a lot better control on views, but the outside sounds of course arn't as loud, as you are supposed to be sitting in a cosey cockpit :-)I am using an Airport Bus (aliased to the C182 sound.cfg) as my spotters platform. It would be nice to be in the "virtual cockpit" view, but have the louder sounds from the "spot view"Cheers Chris

I know Samdim has a payware version out, but is there a freeware version available?

I've downloaded this and have two questions:1 - how do I set the frequency on the radio for an NDB?2 - the heading bug etc change in 10 deg steps not 1 deg. How do I fix this? (Yes, I know I've seen this question answered but I couldn't find it using a search :( )

Hello all:The updated for fs2k4 Falcon 50 is now available at http://www.francevfr.com/

HiAuthors of Terrain Mesh add-ons appear to provide different methods of installation 1. Install in FS9/Add On Scenery and activate in Scenery Library/Add Area2. Place .bgl files direct into FS9/AddOn Scenery/Scenery No further action3 Place .bgl files direct into FS9/Scenery/World/Scenery No furthe actionDo all three methods produce same end effect? Is there a preferred MethodAppreciate help Hope I am using correct forumRoy

Beautiful PFD and Avidyne displays. Nice work on the TCAS systems! Only a short trip so far, but I really like it. Good sounds so far. Not jumping or sensitive like some default or even add-on plays can be. Really nice. I look forward to actually learning how to operate the systems and enjoying all the features/sounds.

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...topic_id=210293