MS FSX | FSX-SE Forum

I have been trying all the solutions on all the forums that i Found, neither of them worked, i have been the entire week trying to fix it, all my simconnects,vcredist,the FS9 dll and the aircraft files are properlly installed, i just want to know what is happening here and if there is any way to solve it

So, I installed this new Scenery for MMMX since this airport is not very good by default, the first two times I loaded it everything seemed to be fine, but then this started happening and i don't know why,i think it could be because the default airport generation is colliding with it but i don't know much about it, can someone help me? I don't know if this is the correct way to post this since i am new to this forum Also Sorry for the bad english

****SOLVED for default 737-800**** The following worked for me and i hope it works for everyone. Change the following lines in aircraft.cfg file under the [autopilot] section - nav_proportional_control=12.00 nav_integrator_control=0.25 change these to nav_proportional_control=20.00 nav_integrator_control=0.00 These values gave me the most stable result just like the PMDG 737-800. Try tweaking these values to make them work as per your interest. Have a nice day all!

Every addon plane I have which uses default A/P logic overshoots the localizer, or final approach course. Speed is a factor, but even at approach speeds it still misses. Am I the only one with this issue?

Hi All, I' not sure if this is the forum to write this. If it's not, I apologize in advance. I posted in another forum topic, and not sure if it was appropriate. I purchased MyTraffic Professional 6.0a last week from another site, and have had NOTHING but issues with it. I can't get any answers in another forum, so I'm desperate here. I've installed and un-installed this product 6 times. My issue is that in the FSX\Aircraft folder, it is empty. There are supposed to be over 35,000 aircraft in it.I tried to install a couple of A/C by copying and pasting, however, when I click on the .air installer, I get an error message stating that the Installer package i…

Good evening to everyone, some years ago (2012) I have bough the retail disc version of "Microsoft Flight Simulator X (Deluxe Edition)". I have used it since then and everything works fine on my pc. Unfortunately, I need to reinstall it on my pc but an error occurs during the installation procedure. In particular, error 1305 stating that some files are not found in the DVD number 2. Do you know a way to receive a replacement of such disk? Or maybe download the online version to be activated with the product key (which I have). I hope some of you can help me in solving this issue. Best regards, Matteo

I had like 25+ Repaints in the default 737 but one they just... dissapeared I tried to reinstall FSX but nothing came out... What do I do?

Hi mates, I have just re-installed FSX and resolved some graphic issues. The sim is still good and immersive in my view 🙂 Whilst I learnt to fly airliners (PMDG 777) on FSX circa 2013, I have decided to limit the planes in my hangar: RealAir Scout and SF-260. Maybe I will re-install later the A2A C172 but no more. Regarding sceneries I have elected: Fly Tampa St Marteen and Grenadines, and FSAddon Tongass Fjords X. So definitely VFR and Bush Flying oriented. I reinstalled also Aerosoft Maldives X - The Malé Atolls, but it is not at the same level as the the other so I might end-up uninstalling it. I have considered to buy some other 'flight zones' - Aerosoft Af…

Hi mates, I have P3D 4.5 but by nostalgia and love of the RealAir Scout, FlyTampa Grenadines and FSAddon Tongass Fjords X, I have re-installed FSX and do still enjoy bush flying in the sim 🙂 The issue I have is that after some flying time or after having used several times the menu, it does not display anymore (but still working with keyboard shortcuts, eg. CTRL+C) OR there is a black screen (but no Crash To Desktop). And when the menu works and I try to load another aircraft or airport, I get some graphics oddities (panel or scenery, see screenshot below). My system: Windows 10, i5 4670k 4.3 Ghz, GTX 1080, RAM 32 Gb. I have read the forum, searched on Gooogle…

Hi, I made a new test airport with ADE 165 to use in FSX. The airport loads and appears on the airport list at start up. However when trying to uninstall the airport by removing all reference to the airport BGL files ect. the airport still appears on the airport list at start up. Is there a way to remove all references to the airport to prevent it showing in the airport list at start up I have done a machine wide search on my computer using the airport name but now matches are found. Any help welcome, Regards, DGB

Hello everyone, I'm a new player to FSX and I am wondering if the auto raising of the landing gear is a feature of the planes that came with the sim and if I somehow can disable it in settings ?

Hello, I am trying to add repaints to my sim, I am using the SE edition of FSX and I am adding everything in the correct places. I put the texture files in the correct a/c folder locations, I add the [fltsim.XX] text to the aircraft.txt folder and change the XX to the next number and everything. However, the repaints don't show up when I start the sim. This happens with every a/c that I have, PMDG, QW, Flight 1, even the included freeware a/c. Yes I am running everything in admin mode, I even mapped my C and other drives so that "everyone" has access to modify files in the security settings. If someone can please help, I would really apprec…

Hello. i noticed that in some fsx missions, like blind flight up the channel. as soon as it takes off, the atc never says anything. yet in the videos of others the atc always contacts you to give you the bows. the fact is that two years ago when I played it it was fine and now nothing happens. what can it be? Best wishes

Hope someone can help. This is happening with all aircraft in FSX Steam. If I use Shift+1,2 etc I get a flash where the pop up should be and nothing else. Trying again I get nothing at all. If I try the alternative of 'views - instrument panel' nothing comes up again. All I have done recently is install LINDA. Any ideas, please.

I have yet to be accepted by topcat forums and its been 2 days thats why i'm posting on this. My TOPCAT keeps giving me this error message when i go to try and update the weather inside topcat. (could not connect to weather server, check your interneg connection). I have a perfect connection and everything is online. My topcat works through PFPX also

Apparently, this is the first AS365 post on the FXS forum. I feel like I'm in a vast minority of people that have purchased this helicopter for FXS. I just installed the aircraft and find that the manual fuel control levers, their associated manual starter buttons and governor warning lights appear to be not modeled. The strange thing is that I see youtube videos (probably made under P3D) where these elements are clickable and can be manipulated via the mouse. When I pass my mouse over these levers, nothing happens, as if they are not modeled. Has anyone else used this heli under FSX? I have presented this question to Cera Sim support.... not yet …

I'm having a problem with display of aircraft in FSX. I recently found it necessary to replace my old laptop, so I bought a Dell Inspiron 16 model 7610. In order to have aircraft display properly, I need to keep bouncing between Preview DirectX 10 on or off. Some airplanes display perfectly and others will show only a shadow on the ground or only some parts of the plane or the plane will show as completely white, devoid of any texture. Has anybody other than me had or is having this problem? DirectX should be backwards compatible. It's possible that I need to change the video card settings, but don't have any idea where to start. The specs of my system are:Dell Inspiron 1…

I was flying a G1000 flight lesson with multiple VOR's but the only VOR listed on the waypoint page is the first VOR and nothing more. The FPL on the PFD has the waypoiny list. The lesson wants you to go the MFD and scroll down and choose the next VOR frequency but it is not listed. The first part of the flight is GPS then it asks to switch to NAV mode upon selecting the frequency of the VOR but its not listed. It's the G1000 flight lesson from the book MS Flight Training for real pilots. I follow this lesson to a T but my display is different. What am I ding wrong? Thx.

Hey all, This was a really great forum chock full of freeware Thai airports, unfortunately the URL doesn't resolve anymore. Does someone know if it'll be back, or have a copy of some of the sceneries they used to have in their forum? Lots of small domestic Thai airports that were fun to fly in and out of and looked fine. Long shot I guess but figured I'd ask.

Hi, if this is the wrong place for this post please advise. I thought it should be here, or the "Hanger." Neither seemed exactly right. Here goes. I'm running FSX-SE on Windows 10. I am learning the B737-800 that came with my FSX-SE purchase. I have gained the ability to land the aircraft, and do so at or near 160 knots IAS, flaps 40. I don't load fuel in accordance with a fuel plan. Whatever "gut" algorithm I use is pretty consistent since the gross weight tends to usually be within the range that calls for 160-161 Knots IAS. When I say "calls for," I am referring to the Vref chart in Aircraft--> Reference. That same Vref chart is what motivates my question here …

Hi all I want to remove a particular sound from my aircrafts cockpit I have a full scale MD500e cockpit and have assigned real switches to control various functions One switch I have turns on the battery, but in the real MD when turning on the battery there is no noise I have removed the battery Sound file from the folder and in the sound cfg removed the lines that pertain to the battery sound but when restart my flight and switch on the battery I still get the battery noise. Not sure what I have missed ? Regards Rhys

Hello! I'm using this addon for about 5 month now on FSX : SE. Flight plan route is showing . But i saw in other pictures of this addon that is showing airports etc. and in my aircraft it doesn't can someone help me? The image on the top is from someones c162 mfd. mines like not showing airports and those pink circles . can someone help me please? thanks!

Within my FSX sim objects I have many aircraft that I never use. Can someone let me know how to delete these aircraft from FSX. I apologise if the answer is obvious. Michael

Hi I really hope someone can help solve a problem I have, i currently am running FSX Stream Edition, i have updated my Nvidia graphics drivers as they were over 3 years old to the latest drivers however i now have the problem that my ingame AA no longer works. ( i am using nvidia inspector), I have tried deleting my original nvidia profile and making a new one. The AA on the preview screen is working fine however when in the actual sim itself there is no AA. I have spend the last 3 hrs trying different combinations but have had no luck in resolving this issue 😞 My sim is set up as per the AVSIM set up guide. kind regards Daz

FSX_SE was issued with the old KSEA layout with only two runways. I've added a bgl from the AVSIM library that has the current three runways with their associated ILSs Every ILS works as advertised except the ILS for RW 34R. I've tried approaches with two different aircraft, neither of which recognizes the ILS on 110.3. All the other ILSs are seen. I've tried two replacement bgls with the same result. ADE shows that the bgls contain the RW 34R ILS but it's not seen by the aircraft on approach. Any ideas? Thanks, Jim Driskell