MS FSX | FSX-SE Forum

When I fill out the flight plan then click ok, there's a pop-up that reads; Cannot find the file C/Users/My Name/Flight Simulator X/Airport. As a result, I have to cancell. This is FSX SE on Windows 10.

Hey Does anyone know where I can find a yacht in free flight. The only yacht I know about does only exist in missions, but in free flight they are gone. Hope some of you know where to find one in free flight mode.

I’m curious to know... is there any way to move the jetways in FlyTampa airport scenery? For example, I have FlyTampa KTPA and I can’t move the jetway via the default Ctrl+J. Is there some other way to move them, or is that not possible?

Strange problem Im having with Taxi2Gate MUVR for fsx , if I start the the flight there every thing is alright all the textures loads ok, but if I fly there the texture at the begining of runway 06 start bleeding with the default textures. I don't have any add on mesh, not orbx, just add-on airports, I also check for duplicate afcads could not find any I try contacting taxi2gate but those people don't respond back , they really have a bad customer service. I think is the worst of all the developers out there

After all the cockpit setup for a selected flight with flt planner, I select a saved flt pln in the FMC , after EXECUTE and waiting for the initalizing countdown the throttle immediately advances. Any ideas?

Does the above titled software work in FSX-SE and Windows 10? Also, can one use a different aircraft than the two provided? Thanks for your interest in this posting!

According to ifly sp 3.2.3.2 has "Updated iFly_VC_Panel01MCP_L.dds and iFly_VC_Panel01MCP_T.dds.". I don't see any improvement .VC still looks the same old... where is the improvement ? thnx

Anyone know of a splash screen randomizer that works with Windows 10?

Hey guys! I no stranger to flight simulators, but I'm starting fresh with FSX since many, many years ago and my first impressions with addon aircraft for FSX:SE aren't good. The game downloaded fine, game's files verified. FSX itself runs really good, all aircraft (AI included) are there, no problems AT ALL. Then I downloaded the iFly747 and the JustFlight757, but both are completely invisible. If I press F10 I see the 2D panel on the 757 and the gauges seem to work; if I press F10 on the 747, the panel is there but the gauges are black. What I already tried doing: - Enabling/disabling DX10 Preview; - Enabling/disabling shadows; - HIGHMEMFIX=1…

Simple problem, I have just bought PRO-ATC/X and when I press '1', I can speak to clearance and ground and all that, but I just cannot see the menu.

MS FSX with accelerator,windows 7 I have over time added some scenery,all freeware and they all worked fine. But recently I found that they do not show up in FSX ie: the 3 runways at KSEA,upgrades to KORD (new runways and cargo ramps),and upgrades to KATL. Most of the bgl files are just added to addon scenery/scenery, 4 of them I had to add thru the scenery library. They all worked great,but yesterday I was going to KORD and found the default scenery,no more new runways. I removed all the bgl files in the addon scenery/scenery folder, and the 4 sceneries in addon scenery folder,and removed them in the scenery library. So I put them back in 1 a…

This may not be in the correct thread, but I found no other place to put it. I got PFPX today, and I need some profiles. And without asking for individual tail numbers or airline aircraft, is there a source that I can use to get real-world (or realistic) values to put into for aircraft? Thanks.

Hallo and a good day i do not want to talk about oom as this issue with FSX is very well known and discussed already. What i wonder is if there is a way to reduce the use of memory space using a 2nd screen. I use 2 screens and like to have the cockpit on one screeen and on the 2nd in the observer mode. this set up uses addition memmory which are wihith the pmdg 777 or 747 arround 400 to 500 mb which is a lot especially if i do a long haule flight which than often cause an OOM. any idear using such a set up to avoid this amount of memory ussage for the 2nd screan or is this normal i use FSX Acceleration Windows 10 64 Intel Core i7-3770 …

Hello, I have never created my own livery before, but would like to give it a try. Was impressed by the quality of the graphics for the DC-10 HD, and I would therefore like to create some custom ones as well. Has anyone does this before? Can you please point me towards a good tutorial? Can a texture for the DC-10-10, also be used for the DC-10-30? I found a texture-only download off the avsim library, but am not sure how to apply it to the livery itself. Thanks!

Hello Everyone I'm completely new to this so please bare with me I have downloaded the PMDG 777 base package but it will not begin the installer as it say I have an outdated Flight Sim X. I thought there was only FSX or FSX Steam? I'd really appreciate any advice, thanks in advance

Hello. I currently am using an HP laptop to run FSX. My system is not the best, and I have to run the game on pretty low settings in order to get good frames. Also, all I can use are freeware aircraft. I figured after 5 almost 6 years of flight simming, it's time to look into some payware aircraft. I've been most interested in the PMDG 737NGX, the Fs labs A320 package, the Airbus X extended package, and especially the most recent version of the Captain Sim 757 (at the time of writing this). However, my computer does not nearly meet the system requirements for any of those packages. I don't have any experience with building PCs, so I was wondering if anyone knew of an…

So this is the second time that I experience this issue. (keep reading, I will explain) I have an FSX:SE installation with the A320/321 installed as a DLC, I have also bought (big mistake buying this from Steam) FS2C for the same add on. After I experienced the issue the first time I reinstalled my entire OS (I was experiencing other OS issues). I went to Steam and downloaded a fresh installation of FSX and the rest of my DLCs. All worked ok for about 3 weeks until the same issue started to occur again. The issue? No NDs when launching the bus from cold and dark state (see Screenshots). However when I switch my default state to "Turn around state" the ND lights up a…

The default B737-800 in FSX has a green anti-collision light fixed a few feet under the nose gear door. Does anyone know where to go to eliminate that? Thanks.

Within the online environment we, an online ATO, use the FSX default C172 as a basic trainer. We have discovered an anomaly with the fuel cut-off switch. In the virtual cockpit the switch works in the reverse sense - it has to be pulled OUT to switch to ON/OPEN, and pushed in to switch OFF/CLOSED. The anomaly is that when using the 2D panel the switch works in the correct sense (and in accord with the decal). Does anyone know a fix so that the virtual cockpit presentation also works in the correct sense? Those reading the FS2004(FS9) forum will see that I have been able to 'fix' a similar incorrectly working switch by opening a texture file and re-naming th…

Hi everyone, I have a problem with the installation of the civa INS in to the Ready for pushback 747-200/300. I got the plane to decently work in fsx steam edition. But I can’t get the Civa INS installed into the plane, the manual that came with the installation wasn’t a help either. so I hope I can get some help here. kind regards, Duncan

Hello everyone, I decided to (finally) take out my creditcard to buy the duke version 2 of Realair. Nothing special there but after installing it, I find myself with a strange problem. Whenever I take off, I can retract the landing gear alright but releasing it on final approach doesn't work. At least, it does work for the front wheel and the right main gear. The left refuses to extend whatever I try. I have it with all liveries and on any airport but only with this aircraft. Reading the manual I found there is a flap failure modelled but I can't find anything about landing gear failures. All failures are disabled in FSX. In the cockpit, there are three g…

Hi all, I have googled and checked all the files re this Goose but wonder why no spray visible. All effects files to invoke spray are there: in the effects folder and in the aircraft.cfg. Strange enough, the default de Havilland beaver DHC2 shows the spray effect perfectly. Any idea how to tackle this strange problem? Many thanks for your help and kindest regards Alfred

So I'm trying to figure out what key is assigned to turn on the spray bar water. I am running the A2A Simulations P- 51 Civilian Mustang.Does anyone know? I'm also trying to figure out how I can add engine smoke or engine exhaust heat effects to the mustang as well. Let me know thanks😊

Looking at doing it realistic with some other guys! And I know some good locations however won't work since I have scenery (like orbx) where as they don't have it or in my case they are using another pack! and also meaning I have plugins to my game that can land on roof tops. but anyway I spent an hour looking at locations that has Helipads with 4 or 5 spots. Only one that I came across is Brooklyn "CGAS" Any other locations that has 4 or more?

Trying to set FSX up regarding AI traffic aircraft, I noticed that in FSX (unlike FS9) the static aircraft in an airport do not show up. In FS9 I used to make a traffic_bgl file containing a simple flightplan, to make an aircraft showing as static at an airport. I wonder whether there is a different treatment of such a case in FSX. Has anybody come across at something like that and had any idea of how to solve it ? I have already changed the airport parking positions radius to FSX standards.