AxisAndOhs Support

I've just got the Streamdeck + and have it setup with the current version of A&O 2.70b37. All the dials and buttons are really easy to setup but just wanted to know if you will be able to implement the dial stacking in a future release before I spend too much time configuring it all as it is at the moment?

Hello, Quick question. Is this tied to the demo version or is something else going on? I'm interested in buying but it needs to be able to connect automatically. Starting AAO after fully loaded into the sim (at the gate or runway) makes no difference. It's always greyed out. Thanks in advance.

Hello, I've spent ages trying to get this to work, so would appreciate some guidance please. I'm trying to assign one button to toggle the Runway Turnoff lights on the Fenix on/off. I've found the local variable which is: L:S_OH_EXT_LT_RWY_TURNOFF I can get it to work fine by setting the lights on with one button (1), and off with another button (0), but not as a toggle. I've tried adding this custom key-down events: 1 (L:S_OH_EXT_LT_RWY_TURNOFF, Number) - (>L:S_OH_EXT_LT_RWY_TURNOFF, Number) (L:S_OH_EXT_LT_RWY_TURNOFF, number) ! (>L:S_OH_EXT_LT_RWY_TURNOFF, number) Neither is working. I also notice that if I go back into the …

Over the past couple of years I have never been able to get my StreamDeck to work with Axis and Ohs and am trying to check the following advice in the manual: Port 9080 is blocked by your firewall. Make sure to allow the TCP Port 9080 in your firewall software On my computer, in the Windows Defender Firewall settings, I made a rule that looks like this, covering both the WebFIPs and the WebAPI ports. Does anybody know how to do this with Bitdefender please because web searches are not coming up with a solution for me.

Hello All, Any guidance greatly appreciated. I have absolutely zero programming or scripting ability. I've had AAO for over a year and a half but have only really tried using it lately with the PMDG 737. Hardware is HC Alpha, Bravo and X-Touch Mini and have many functions working fine but I can't get the fuel pump switches to toggle properly when first entering the Aircraft. So the fuel pump switches are all in the off position when the plane loads but as soon as AAO enters the picture the fuel pump switches go haywire. Once I manually turn them all to the off position they appear to work perfectly afterwards. I have them programmed to the 5 Alpha light switches…

Hello- A few sim update's ago MSFS introduced a native steering tiller. I'm struggling to get it to work with Axis + Ohs. From within AAO I've tried setting it to the standard tiller function, and also the steering set function, without results. I've looked through the AXIS_ options and I don't see one for the steering tiller .What is the best binding to get this to work as if I had the tiller assigned within FS?

Hi, I am trying to get my head around some scripting in Axis & Ohs and wondered if anyone could please help. This reverse scripting is very new to me. I am trying to carry out an OR operation between: (A:CIRCUIT·SWITCH·ON:20,·bool) and (A:CIRCUIT·SWITCH·ON:17,·bool) I want to use the result to determine whether or not to turn on an LED via midi (this part I can do). It is the syntax of the OR operation that I am struggling with. My initial thoughts were: (A:CIRCUIT·SWITCH·ON:20,·bool) (A:CIRCUIT·SWITCH·ON:17,·bool) OR (>L:Result) I am assuming the result to be 1 unless they are both 0. Thanks, Daz

I'm using a (genuine) Mega2560 with some dual rotary encoders (the type with the pushbutton center). Some are from Propwash and some are Bourns encoders but they both operate the same way. There are no V+ pins on these dual encoders so, using a simple loop sketch for testing, they're coded with INPUT_PULLUP resistors on the Mega. Every detent generates an output. This works as expected in a loop sketch on the Auduino IDE with output: Direction: CW -- Value: 0 Direction: CW -- Value: 1 Direction: CW -- Value: 2 Direction: CW -- Value: 3 Direction: CCW -- Value: 2 Direction: CCW -- Value: 1 Direction: CCW -- Value: 0 Direction: CCW -- Value: -1 Directio…

Hi, Great piece of software, love it. Is it possible to set the LED status on a per layer basis on the X-Touch Mini? Is there a test for the active layer? I've programmed certain LEDs to illuminate, but the same LEDs stay on when I switch layer. Thanks, Daz

This may not be an Axis and Ohs Problem, but my stupidity, but sometimes I'm not able to watch Events in the Event Windows, that I'm absolutely sure should be shown. Of course I always collect LVARS as well as BVARS and HVARS before trying that. One Example: I know, that when I click any Knob or Button on the PMDG 737 MCP, that should result in something like 38001 (>K:Rotor_Brake). I even have own Screenshots from earlier tries, when this had been shown. But for some Reason sometimes I can click on whatever I want in the Cockpit, but no Events (not even the "Spam" Events) show up. What may I do wrong? EDIT: Simconnect is running of course

Hello @ll, I'm having trouble with my SwitchPanel (powered by AxisAndOhs). Most of the time it is very sluggish, after flipping a switch it can take several seconds until the associated event triggers. But it is only this panel, my two RadioPanels (connected to the same hub) and the MultiPanel are working normally. Has anybody seen this before? To find out if my unit is broken somehow, or if something went wrong with the AAO app at some point concerning this device, I am looking for AAO users who also have a Switch Panel and who would try the new AAO version 2.71 on their computer. If you are willing to help with this, please send an email with your proof o…

Hi, I have a strange issue. AAO works fine when I first load the game and fly. However when I go back to the main menu and reload a second flight, any scripts stop working (for example, using A:COCKPIT CAMERA ZOOM, Percent to reset my zoom). The axes and key presses work without problem, it's only the scripts which stop working. The main AAO window indicates that it is connected to the sim - the green light is lit, and this corroborated by the menu. The way I can fix the problem is simply to disconnect and reconnect to the sim. Then everything works as expected until the end of that flight. I have to do this disconnect-reconnect for each subsequent flight. Another sym…

hello translated by Google do you think it would be possible to control the lights of the Honeycomb Brava in AAO Like MB does thank you

Hi. Context : Axis and Oh's 2.70b37 running as Administrator. Offline Mode checked (become Red). No configuration selected. I would like to test a FIP layout in development without MSFS running (Offline Mode). When i check Desktop FIPs or Web FIPs, AAO crashed. If i select a configuration before checking FIPs it did not crash. So, it is OK for my tests. Is it a normal behavior or is it a problem with my installation please ? Michel

I continue to have problems with this software. I have purchased the new honda jet.So ,with aao,heading works, vs works, altitude even with 100 or 1000 to the side of the box does nothing at all. Aileron and elevator work. Throttle does not work at all.Nada. So i tried removing the default sim assignments and tried using aoo.nothing. I tried using "select simulator event" no luck.I tried using "select simulator axis" and again nothing. I mean AOO sees the throttle as a matter of fact I see the numbers going up and down below the "move joystick axis box" but it does nothing in the sim. If I choose throttle1 from the "simulator axis" and push the throttle all the way forw…

I recently purchased AAO and a Behringer XTouch Mini for use with MSFS. Because I fly in VR only, I also installed this Touch Mini Gauge, a framework that makes easy use in VR possible without being able to see the physical XTouch. I installed everything and most things work as they should and I'm delighted with the possibilities. I have encountered a problem however that I can't find the solution to, despite consulting the relevant manuals. I installed a sample configuration into the framework and all buttons and knobs work fine. The framework also includes a shift button function and I'm not able to change its assigbnebt. In the template and the configuration file …

Hi there..I have a new machine and FS2020 installation, and I wanted to copy the AAO templates, AND joystick button assignments to the new machine...I tried exporting the templates and importing, which gave me no joystick assignments on the new machine. is this possible to do..ie make the new machine AAO look like the old one? the FS2020 installation is a direct copy from Steam installation, and all works well except AAO.. Thanks ! Bill P

AAO was starting fine with MSFS just yesterday. Then, to get the remote CDU for PMDG's 737 working, I had to enable it in Admin mode. That's the only change I've made to it. Now it won't start with MSFS. Here's what AAO is inserting into exe.xml: <Launch.Addon> <Name>LorbyAxisAndOhs</Name> <Path>C:\Program Files\LorbyAxisAndOhs_MSFS\LorbyAxisAndOhs_MSFS.exe</Path> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <CommandLine /> <NewConsole>False</NewConsole>

Hello: Can someone help me with which axes to configure to be able to use the Fenix A320 with Honeycomb Alpha and Bravo? I don't have pedals. This plane is driving me crazy. Thank you very much

I was hoping I could sort this issue out myself, but sadly this has not proved the case. The Stream Deck with the relevent profiles appears to be working OK with all my aircraft, except the FlySimWare Chancellor 414. I have the correct profile for Stream Deck and the relvent scripts for A&Ohs. It's odd, as some things work but more buttons don't work. eg, the EFB, fuel selector, interior lights, cowl flaps, landing light etc. none of these work. I have reinstalled the aircraft, Stream Deck profile and the script for A&Ohs. What makes it more irritating is that it has all been working fine and this issue has only just arisen. Clearly Stream deck is connecting to A&…

Hi everyone :) I’m learning Axis and Ohs but I have the following problem : I don’t have the « watch simulator events / variables » submenus in my scripting menu. I do use the demo version but it’s said it’s fully functional so I don’t understand what happens. May be someone can help :) Thank a lot.

Hi! I use MSFS with a Midi Fight Controller's radial dials. Got A&O to work kind of and now I'd like to really figure it out but unsure where to go. Thanks for any info you can point me to. 1- How do I download updates? I assign the throttle, mix, prop and elevator trim to a simulator axis and a couple of things occur that I do not know how to fix or tune. 2- When i load into a new flight, when I first turn the radial dials the plane's controls will bounce to the zero position of the dial... like zero throttle, full lean, feather, and then the dial and the control will be synched after that. I think what I need is a setting to synch the control's posit…

Hi, When I hit the Active Pause (it does not make any difference if through keyboard command or an associated button on the yoke) everything still works fine (in the pause). If I go out of the pause (back to the normal flight) my configuration of the yoke stops working (Turtle Beach VelocityOne). I cannot recover from this state. I need to exit Flight Simulator and start again to be able to fly again. Funny thing is, inside the Active Pause the yoke works as expected (also when exiting and entering Active Pause multiple times). So, in short words, to reproduce: Start flight. Press Active Pause to enter active pause mode (everything still works). …

Was just wondering if the Stream Deck Editor will be made compatible with v6? Wish I hadn't updated to v6 as now its messed up all my profiles and i need the editor to fix them up again!

Latest update to AAO has broken all my profiles from @guenseli with missing text when a switch for a light or autopilot is turned on. On the G1000 profile, the altitude switches no longer work. I was on the previous 2.60 version with no issue. Reimporting the profiles do not fix it. There is a functionality flaw somewhere.